2005-2019 Toyota Vehicle Stability Control (VSC) Full Reset No Special Tool (Shown On a 2011 Tacoma)
Vložit
- čas přidán 7. 06. 2023
- Hope this little video (my 200th video to date) helps you reset the very dangerous VSC issue you may encounter after changing suspension components or going with bigger tires, where your vehicle acts like it wants to throw you off a corner into a ditch. I'm glad I won't be afraid to go around another corner with this issue again!
Thanks for watching my videos please make sure you SUBSCRIBE!!
THANK YOU!!!! I've seen this solution before, but NO ONE would talk about WHY they were doing it!!! My 2014 was definitely FIGHTING ME on LEFT TURNS at 35-40MPH.... THANK YOU!!!!!!
@gomez619 I saw what you saw...people chasing phantom issues looking at faulty ABS systems and wheel speed sensors. YOU'RE WELCOME!!
Works for 2004 Lexus GX470! Excellent!!
@tomfrancisco4487 it would be nice to have a full list of all the Toyota models and years this works with!
Faaaakin beauuuty she worked first go bud !! Thanks eh!
@victorziebenhaus3229 heck yeah that's awesome, no problem!!
Thank you ❤
@giopirmisashvili5514 you're welcome!
Thanks
@hamishlovesit4731 you're welcome!!
This is exactly what my 2012 Tundra is doing. Do you know if this works on Tundra as well?
@cliffordebel2977 I am not aware if it does or not.
What's the reason for not showing the actual PIN connections with the jumper wire?
@jascam1 are you saying while I'm inserting it in during my count while I'm showing the dash so you can see what happens when the lights change their flashing?
Hey have this same problem with my 2006 Toyota 4 runner. Whenever I take a hard right or left or even on the same turn you took in the mountains it does the same thing where it brakes while I turn. We tried to replace the entire front and back abs wiring system and that didn’t work. Been trying to figure it out. Will try this out to see if it fixes my problem. Any suggestions?
@chrisavent8012 someone else replied and said this worked for their 4Runner. Even if you asked a dealership to do the VSC reset for you, it would be worth it. Sucks all the suspension work was done. I guess it's all new now but maybe not needed.
@@ShawnMartinNCBIRDMAN we had it zero calibrated bc I have a 3 in lift but it still makes that noise and brakes when turning.
What does recalibrating actually do? Why does it stop the truck from locking up in the future?
@dizzle215 I mention it in the video, but Toyota programs parameters in the vehicle to check to make sure that the stability of the vehicle is solid, more than likely as in centered based on sensors in the vehicle. I'm not sure if they are like a gyroscope or what, but these relay information to the vehicle that the stability has been compromised and it tries to regain control by stopping the vehicle. For instance if you were off road and these parameters changed suddenly, the vehicle would try to stop so that whatever hazzard you were facing would be minimalized. I'd have to dig deeper to see what the parameters are if anyone knows, but since I had the exact symptoms mentioned in the Tacomaworld writeup and doing the reset fixed my issue, I left well enough alone. Thanks for the reply.
Thank you so much! I followed the steps in your video and everything matched up perfectly. I had this issue with the steering wheel sort of locking uo going about 60 miles an hour around the corner, so I’m pretty happy to hopefully have addressed it now. Thanks again!
@@dizzle215 that's awesome! Yeah, I found myself taking the same corner with a little hesitancy yesterday, just waiting for it to do it again, but it never did!!
Does this work for a 2015 avalon?
@demarwright2384 I have an 07 Avalon (good choice!) but I am not sure that it'll work. Does the 2015 Avalon have VSC?
Will this work with a 2019 Tacoma ?
@mileslake6760 the info I've seen says it stayed the same through 2023.
@@ShawnMartinNCBIRDMAN No. 2020 and up don't have the same pins at the obd2 port. You can do it with an advanced scan tool.
Good to know, I'm going to edit the info thanks for the feedback!
My 09 has done this a dozen times. First I thought it was because my trailer was a little heavy but then I was noticing it while not towing anything and like under 40 mph on the highway. I think this should be some kind of safety recall because it's extremely dangerous. It puts you into a skid and your going into the other lane. Always on a right curve and Truck is skidding into traffic. I never felt I was driving to fast and when it was doing it without towing and under 40 there is definitely an issue. Hope your fix will take care of it. I just wonder how many are experiencing this in there Tacoma? Btw my tires are stock.
@johnnycat60 it would be nice to know how many accidents or issues this "safety feature" has caused!
How should that be a safety recall when YOU are changing the OEM suspension dimensions with larger tires or suspension??? It is clearly stated that a VSC reset should be done with an alignment or any changes to the suspension. You make a change to the suspension that causes the truck to not react the way it's supposed to and you want a safety recall??? LOL
Perty sure I stated in my comment that my truck and tires are stock. Nothing modified