This did not work at first until I found out you have to wait 120 seconds of the lights flashing rapidly. After 120 seconds I pulled the paper clips out and restarted the car. I was so excited to resolve this issue. I have an 06 Lexus RX 400h
Hi I have 2003 Toyota Sequoia limited. Awd. Ism trying to locate ts and cg pins. My obdii connector is flipped upside down from yours. It’s the opposite of yours 180 degrees. Based on your diagram will it match my pins?. So yours show 4th hole from left 4 and 12. Does that mean mine is 5th slot from the left in order to match 4 and 12 ? Please help. Thanks.
I have is250 2007. Then VSC light went on. Definition: " VSC Test Mode " = " Zero Point Calibration ". Also, be gentle with the paper clip insertion. If you jam it in you risk disabling the obd2 port.
Hi there... Great tutorial. One question though... If I do this in my drive way, how am I supposed to drive straight for ten seconds? Meaning, before I drive straight for ten seconds, I'll need to back out and turn the wheel. Will that disrupt the calibration?
@@CL-mp4vn - so find a level surface on a street with no crown, or long parking lot, and then do process. Is that really how the techs do it you think?
Thank you for your noble intent and proper guidance
This did not work at first until I found out you have to wait 120 seconds of the lights flashing rapidly. After 120 seconds I pulled the paper clips out and restarted the car. I was so excited to resolve this issue. I have an 06 Lexus RX 400h
First 8 secondd 4 or more then switch off again hold both together and switch on for three seconds its fast blinks after wards remove pin
Many thanks brother
Hi I have 2003 Toyota Sequoia limited. Awd. Ism trying to locate ts and cg pins. My obdii connector is flipped upside down from yours. It’s the opposite of yours 180 degrees. Based on your diagram will it match my pins?. So yours show 4th hole from left 4 and 12. Does that mean mine is 5th slot from the left in order to match 4 and 12 ? Please help. Thanks.
Worked on 2014 corolla.
Pin 4 and 14 on my sons 2003 Toyota Highlander
I have a 2000 lexus gs400 it won't start had key programs to it and the DCU wipes clear
What software are you using to get this information? A Toyota service manual or some third party online manual?
It's Toyota Tech Stream
It really helped me ❤
Good explanation but i think pracatically is good
Can you do pracatically?
Avensis 2008 D4D 2.0 diesel not working. Can anyone help please?
Great, I have camry 2009, not sure which one is TG and which one is CG. Is it the same as you showed?
You got to find obd2 diagram for your particular car on google.
I have the same car! Could u find TG and CG??
please can i have a service manual fr lexus rx 400h ?
is this applicable for 2013 rav4 ?
ve aleykum selam in Turkey, Can i try for chr 2016 1.2t? . is it run?. Thank you for video
Chr de işe yaradımı
Comment faire pour avoir ce manuel je suis garagiste au Congo Brazzaville
will it work for 2002 Lexus LS430?
Toyota Highlander 2015
Thank you so much.
It worked with Corolla 2010 Base
Engine 1.8
4 cylinders
I looking this on one french or manual
Will this work for 2011 Toyota forerunner SR5
Thank you
Will this work on a newer 2019?
Nice explain
What year lexus
What does TS and CH stand for ,maybe they are called something different on my jeep? Does this work for all kinds of cars?
Ts is a ground. Its probably different on a jeep. You probably have to Google it
@@plowe6751 tester connection
Have code c1201?do I need to do zero calibration. It was rear ended a few weeks ago. Do I need to do zero calibration.
I have is250 2007. Then VSC light went on. Definition: " VSC Test Mode " = " Zero Point Calibration ". Also, be gentle with the paper clip insertion. If you jam it in you risk disabling the obd2 port.
Car book name please
Hi there... Great tutorial. One question though... If I do this in my drive way, how am I supposed to drive straight for ten seconds? Meaning, before I drive straight for ten seconds, I'll need to back out and turn the wheel. Will that disrupt the calibration?
Why don't you think of moving your car out of drive way *_before_* doing this ?
Honestly I think you would have to do this in huge parking lot too perform this... I'm about to try it on mine over the weekend. 👍
@@CL-mp4vn - so find a level surface on a street with no crown, or long parking lot, and then do process. Is that really how the techs do it you think?
@@mbales369
And do you really think the techs never saw a huge parking lot or even closer to his home, the street of his neighborhood ?
Will this work on 2008 equinox
can i do on subaru brz?
Did you ever get it👀?
@@killakris13i already try & good to go
@@Izchapito it works?? What ports did you put it into?
@@killakris13 4&13
Urdo me bulo yay
Hi 4 nd 13 not 12
hi
Fuuyj
⁰
Urdu me bolu yar
U need more info u don't show shit on year of vehicles
i agree