Video není dostupné.
Omlouváme se.
Reset Toyota dash lights VSC ABS Traction Control Corolla Matrix 2010
Vložit
- čas přidán 22. 09. 2016
- Here's a quick and easy way to reset your car's computer after a repair, maintenance, or alignment . Have a paperclip handy. I refer to the paperclip as "pins" mistakenly. Hopefully that doesn't throw you off.
Bent paperclip, pinned to 4 on top and 5 on bottom, can confirm this works on a 1.8L Toyota Corolla. Circumstance was vehicle alignment causing a fault to be tripped after swapping out control arms. Thank you for the tip!
Is that what you use for the “pin”?? He doesn’t really explain or show what he used. Paper clip ??
@@95manneya Yeah man bend it into a horseshoe or "U" shape and bridge the pins.
@@95manneyacommon item for this task
Thank you SOOO MUCH! for the pin locations.....if anyone is having difficulty with resetting; try clearing your engine codes first....THANKS AGAIN!❤
Thanks - it worked on my 2009 Pontiac Vibe. We'll see if they stay off. FYI, I used a paper clip for the pins.
Clip trick worked for me. Thanks
i got lucky i came across your video i want to thank you so much it worked on my 2007 lexus ls460 it reset all the lights
thanks again
would it work for a toyota harrier 300G
2005-2006 model?
Hi . I have a Pontiac Vibe from 2009 and I made exactly the same how you did , but whem the car start on the road the lights come on . I mention that I change the transmision in my Pontiac with a transmission from a Toyota Corolla , works evrything just fine but the lights are still on . Do you think that I have to calibrate with a laptop and program for Toyota ?
Tried what you said but sad to say, I must have shorted something cause I now have nothing electrical in my 2010 Corolla.It's completely dead- nothing.What do I do now? I really thank you for all your help! WWC
Thanks a lot for the video ,it did help me clear my that error out several times . Do you think it keeps coming back due to dirt on ABS sensors or ABS actuator needs replacement as some told me on my Lexus RX400H ?Anther question is there any new updated OBD2 bluetooth adapters with Tourq pro app that could clear such an error ?
I just watch your video and tried it.im amazed It works on my 2012 sienna.thanks for your video man
so you insert the paper clip in #4 counting from the left at the top and #5 from the left at the bottom and the clips must not touch each other right???
"Jumping" means ti "connect" the two pins as shown.
Did you short the 4th pin from left on top with the 5th pin from left on bottom using a paper clip? Didn't see that crucial part in the video. You used the word inserted but to clarify, did you short the two together?
Thanks for sharing.
Yes, sorry I didn't elaborate more. One paperclip bent into a U shape, inserted into the shown slots.
Does anyone know what diagnostic port holes to jump on a 2000 Camry for a ABS reset ?
Holy shit, it does work
Ahahaha, faith restored!
is it ok for chr 2016 1.2t
Hello I dont see what you did to reset the control ABS you focus on the brake pedal!¡
Follow my fantastic drawing in the beginning!
Maybe watch the darned video?
Hi 👋🏻 What about airbag light ? This method works?
Tried it on my 2014 corolla it worked
Thanks
the pin and paperclip into metal holes looks dangerous ... esp when you're dealing with electricity and cars computer system
It's not dangerous. Very common task for many vehicles.
Relax. You'll learn one day my tiny grasshoppa
Thank you so much.
It worked just like you said.😊
Did the light ever come back on again? If so how long did it last off
If your steering components are within a correct defined range as specified by your car's computer, the lights should not come on again.
@@ShareXP thank you
what does the exclamation mark mean???
Does it clear the codes ?
I have a 2010 matrix and this doesn't work. It doesn't even set off all the lights when I put in the paperclips and turn it on.
Does the light come and go ?
I removed the battery completely for 15 min it also worked??
Yep, that just means everything is within the computer's acceptable range of tolerance. If it needs a reset, then follow my guide.
@@ShareXP does it clear the codes as well as turn off the light ? I was told I have a code but the light is not on.
I'm not sure if it clears any codes, sorry!
You didn't show what you inserted into the pins?
Smells Like Silver ™ I used a standard (not color coated) paper clip bent into a horseshoe shape!
Paul Carlson so it's inserted into both at the same time?
Smells Like Silver ™ Yep, that's right.
Is that work with 2008?
Worked! Thanks
I try on my 2004 toyota matrix xr 4wd it does not work
Dis not work for me on my toyota matrix 2010
Where do I get the pins? What are the names of those lins?
The "pins" I refer to mistakenly are just a bent paperclip! Put it in the correct holes to reset your codes.
@@ShareXP thank you. Also, is there a chance that it could damage the computer?
It's working but after I turn the car third time the Abs go on again
All this does is clear your lights if there is nothing seriously wrong. I imagine something is off spec significantly or damaged?
It's not working in my car
We couldn't even see what u did u recorded the E BREAK instead of show us what u were doing at the beginning smh
My apologies from 2016.
If you don't know what "jumping the pins means" this is not the task for you.
Your tutorial is so poor, we dont know waht you just did, cant even see how u fix the pin amd when you removed it.
This is not the task for you, then.