Springfield Armory TRP Operator 10mm Tabletop Review and Field Strip
Vložit
- čas přidán 28. 01. 2019
- Tabletop Review and Field Strip of the Springfield Armory TRp Operator in 10mm.
Find the gear we use and approve of: www.amazon.com/ideas/amzn1.ac...
See our full shows on CarbonTV! mbsy.co/hGzf2?url=www.c...
Support this channel with some swag at www.cafepress.com/GBGunsMerch - Sport
I've NEVER seen a 1911 taken down or put together that way. First thing you do is remove barrel bushing then break down slide and easily remove spring and barrel. When re installing you install barrel and spring then install the slide , install the pi through the barrel link and LAST install the bushing. That's how to break down a 1911.
That poor Gun, stuck with this guy owning it! The bushing wrench on the tight fit barrel! Push it through to where it isn’t beveled and it will come off easier. But damn it was like nails on a chalkboard watching you with the spring at the end, but yelled when you hit the slide stop!
Life must be so difficult for you.
I KNOW... WOW!
schemp001 - No joke. I sucked my chair cushion up the butt crack when he smacked the slide stop with the magazine.
I always scan for videos first. Thank you for your uploads.
I love my Rock Island Ultra FS HC, but that Springfield is mighty nice too. Thanks for sharing Graham!
Kratos_God_of_50_BMG how’s your RIA ultra fs hc 10mm been???
SA makes some of the most gorgeous 1911's on the market, and that one is no exception. I love the scalloping serrations on the front are rear grip as well as those sweet panels. Congrats on the new hotness brother, total deliciousness for sure!! Looking forward to seeing that one at the range, Cheers!
THIS IS AN AWESOME PISTOL !!!!!
I have the RMR 5 inch version and own custom shop 1911 and other TRPs and the slide to frame on this one was smooth but tighter than my other TRPs and the bushing was super tight should have shot before cleaning first
She's a beaut', man. The tolerances are so darn tight. I can't wait to see what she's like out on the range.
A lot of folks giving this guy flack about how he removed the recoil spring but I just bought the Springfield 1911 10MM long slide and he did it exactly as shown in the manual. It is in fact different even in the manual than the other versions of this pistol The end recoil spring catch is not the same on this. The only thing in this video I found he could have made easier for himself is the replacement of the last catch to finish the job. First, lock the slide (and flip safety on), place the pin in most of way. With it locked on safe, that tiny springloaded catch allows it over the hump. Then slide rack forward to line up to that tiny notch and press rest of way.
Don't you know you're only supposed to comment on the internet to spread unfounded range lore or if you have no personal experience? Thanks for the backup
@@GBGuns Yeah, I hear ya. People can be very rude. I viewed many videos with other ways to disassemble except they weren't THIS handgun. lol So, glad I could provide back up and appreciate the video. It was helpful. I also clarified my comment above. I found that with rack locked and safety on, that tiny tiny little bump will now press in just enough to go half way.
I cant wait for the range review. I've been eyeballing this pistol for quite some time, and it seemed like no one would touch a real the review on it.
Yeah. Me, too. I sure hope he didn't forget about uploading it...
@@greatBLT I'm pretty sure he has at this point it's been 5 months since the table top, still no range review.
We filmed it twice, just nothing noteworthy to share. We don't have a wide enough variety of 10mm
@@GBGuns fair enough, just that statement alone works for me. Also I feel ya, 10mm is scarce everywhere I go(indiana), and I hate paying $25-30 a box for range ammo.
Damnit! I told myself I don’t need another 1911! But a 10mm 1911! Oh yes I do! That looks so sweet! At first I thought those grips were hideous and would need to be swapped for some good ol wooden ones, but as the video kept playing and my loving heart swelled, I suddenly fell in love! Oh well just another couple of months of Beenie weenies and it’s paid for!
Nice!
Still my favorite handgun.
FYI: You need to tweak the barrel bushing a tiny bit. The recoil spring plug didn't reset properly under the bushing. This can potentially shear the bushing if the recoil spring's coils fully compress before the slide has stopped its rearward movement. (It isn't healthy for the spring or the spring plug either.) That extra tenth of an inch can make a difference.
I didnt think bending recoil spring under pressure was a very good idea either.
Well done video ! I would like to see you get some ammunition such as Underwood 220gr HARDCAST and give a report on if the gun handles the ammo ok .
OMG! On a properly fit, tight barrel bushing, NEVER set the barrel in to full lockup at the rear and THEN use a bushing wrench to turn the bushing on the END of the barrel! It can gall the interface between barrel and bushing and lead to a loose barrel-to-bushing fit. You'll notice the muzzle end of the barrel has a raised section right before the muzzle. It's done that way to have a tight bushing to barrel lockup. Instead, put the barrel in part way (leaving and inch or more out the end of the slide) and then place the bushing over the barrel an into the slide (you'll notice there is plenty of room between the barrel and bushing at that point). You can then use a busing wrench to turn the bushing to the proper location.
Ya, that HURT to watch!
Big10
Was very cringy to see him do this.
People are really something else!
Some of the pictures I've seen from various review articles in such seemed to have some type of rail cover installed. Do you have any idea what that is and where I can get it?
Shewee that's a nice 1911
I did the same type of rebuild with my green Springfield GI except with WC and Ed Brown parts. No regrets. No RAGRATS.
Anyways, the end of the video has a great example of how not to reassemble a 1911. I literally cringed at his epic battle with the recoil spring.
l Iove 10mm!
Great presentation from Springfield Armory, maybe they are trying to regain their lost market.
Just let someone else buy it and look for them on the secondary market. I don't give Springfield any money but I'll pick them up from someone else
Probably....
Springfield, and Colt can get F*CK*D!!!
LIBERAL, TREASONOUS, COWARDS!
Dawn Patrol!!! 🤘🤘
Please give us an update
wow, just thought i should grab a 10 mm and i see this pop up in my feed ...
NSA is spying on us!!! thats why when you mention something, your phone just pops up videos of it?????? come on!
I wish it had a mag-well. Other than that, I love the looks of it. It would make a great pair with my TRP full-rail 45 ACP.
I’m interested to see how much the 10mm beats the shit out of the 1911 design. Keep us updated!
it will be interesting to know
i heard this gun was built around the 10mm time will tell
10mm will not hurt it at all. I been shooting 10mm in 1911's for some time. Put a shock buff in it and run a full length guild rod. I run full power 10mm Norma loads in my 1911's. Rock Island makes the best 10mm. There long slide 10mm is the tops in high cap.
@@KLH1966 i have always held one thought
if i hit a guy with rpg and he is still standing i will buy him a beer...
thank you for your comment i was wondering about that weapon just curious is the gun double stack like mae west or single stack have a great week cheers
@@KLH1966
just ordered the Rock Ultra Tact II 10mm a Lipsey's Exclusive edition....
and am so excited. I was talking to a man at local shop who buys everything!
He bought a new kimber 10mm (Beautiful gun, lightning cuts, gold barrel , and all the upgrades.)
He also bought a Rock Ultra Tact II 10mm , and told all of us that the Rock island out shoots the kimber every time! He went as far as to say out of all of his 1911's His new Rock Ultra is the most consistant accuracy. Iwas looking at the TRP but after talking to him, i ordered a Rock Ultra after getting one in my hands!!! EXCITED!!!
Gaston Mannlicher works perfect
Did wolff gunsprings reccomend to disassemble the 1911 like this? Lol looks like a great way to kink your recoil spring and than have to replace it every cleaning, lol please take the bushing out first. Easier to watch
Yipes! The 'idiot scratch at 3:16.
Enjoyed your video, new subscriber, timing was perfect, I'm researching 1911 10mm. Springfield seems like the gun to purchase. I own 1911's Kimber, Ruger, Smith & Wesson, Love that bull barrel on the Springfield 10mm. I'm in Bear Country, been carring .45, the 10mm looks like the ticket
on Bears. Thank You...
Hope you went with the Rock Ultra Tact II
That’s not a bull barrel...and you don’t need a gun to protect yourself from bear.
Which one is better Ruger or Springfields 1911 in 10mm?
jimd1968 Springfield by far
Thank You for the information
Dude, who taught you how to disassemble and reassemble a 1911??? My first experience with 1911’s was with the U.S. Army and we were never taught to disassemble one like that. No wonder your recoil spring was all catawampus when you disassemble and reassemble.
I agree. I love Graham's videos, but he is the worst 1911 field-stripper there is.
Yeah, I never get the gun apart and back together.... oh wait...
@@GBGuns That response was before my comment that indicated you were correct.
@@kirkeric I was replying to the other guys. CZcams comments has been odd this morning. Some I see on the computer and can't reply to, others I can reply from the phone but can't see.
I am glad to see no bull barrel. Wear out the slide and throw away. I shot 10mm for years. You want a gun wear you have the ability to change a bushing.
Extremely unpopular opinion in 2019... Springfield TRPs are very good 1911s. why'd you go with the 5 inch instead of the 6?
Rock Island has the best 10mm long slide out there. I havs both a single stack and hi cap 10mm long slide. Puts the hurt on hogs in tall brush.
KLH1966
I’ve noticed you have commented on your rock island being the best 10mm out there. The long slide trp 10mm will best the rock island any day. You love your rock island and I don’t blame you, it’s a nice gun. But no way in any hell will it ever beat the trp 10mm longslide.
@@KLH1966
Yes they do! Rock Ultra Tact II in 10mm !!! All Day!
@@stevenwaldron1029
Yes it will! A guy bought a $1400 Kimber and the Rock Ultra Tact II, and the rock out shoots it easily! and al of his other 1911's as well...
if hes buying $1400 Kimber im willing to bet his Rock is the cheapest of them all,
and he clearly said it Put shoots all his 1911's !
jIt's funny and a bit odd. There's been many CDN's with Springfield 1911's who've had problems. Missing hole for the plunger for example. Yet American owners of SA guns have been happy. No troubles.
Opinions on MIM parts? SA guns do use MIM parts. partially. Some gun nerds (who can afford to) try to stay away from guns using MIM parts..."factory made" guns.
Was looking forward to the shooting vid,but from what I'm hearing probably wasn't good enough...Kitty :))
Sweet gun, i field strip my 1911 exactly like that, even the manufaturer said whatever works, no right or wrong. 1 thing i dont understand is why dont you just insert/remove the plunger from the rear, rather than through the barrel bushing.
It is painful to watch you disassemble and assemble a 1911. You even have an idiot scratch on the TRP you sent to Springfield. Just get a Glock and leave the 1911 alone.
Life must be terrifying for such a sensitive soul like you. That GI model I sent to Springfield was my first handgun.
Did you really just look down the barrel of that firearm? 🤯🤯🤯🤯🤯🤯
You figured it out, I'm a cyborg and filmed this with my eye camera. How did you know?
Graham Baates
Well it looks like you have the camera attached to your head so you could’ve. It was just a little concern.
WOW...LOL...
My 9 year old just finished Hunter Safety yesterday, and thats exactly what he noticed!
great role modeling ...
Nice ..but can't justify the cost ..run USP .45 WITH PLUS P LOADS N GOTTA BE EQUAL TO THE 10MM
Plus P 45 it not even close to full house 10mm Auto. I shoot a lot of 10mm and full house loads near the 41 magnum in ballistics
if only it was a series 70
thanks. ..please lead with price. price is easily top 5 guesting people will ask
I never include price as prices fluctuate but the videos remain the same.
Graham Baates OK so I guess you got it for free? or as a loaner
Just Google it, you obviously have internet access
John Denham www.google.com Step1) Click the blue. Step2) Click the rectangle in the middle. Step3) Type the gun name followed by the word PRICE. Step4) Press ENTER. Step5) Wait as worm hole opens. Step6) Scroll down looking for $ symbol followed by numbers. Step7) Sell computer since you don’t know how to use it.
The point of the comment is that its SUPER easy to let his audience know the price point of a gun! Sure one can search, but what if his specific model is not what the search brings up, etc. Its just common sense, and lazy on the reviewers part! Cause that's all he is , a reviewer...
Got mine in 5" TRP w/ RMR 10mm, wouldn't feed anything out of the box. Ya gotta be kidding... my first Springfield (and last -what a disappointment). Sloppy work / no excuse for the $ of this gun
I am with you on this. I have the RO Elite Operator, 5" barrel. I shoot the cheaper stuff, namely Sellier and Bellot because they are the cheapest and they are FMJ. Out of the box, I had a number of situations where the bullet got lodged into the chamber, with the angle too great for the slide to overcome. I had perhaps 20 problems out of 200 rounds. Springfield suggested trying another ammo, so I went with Magtech, also cheap and also FMJ.
The Magtech was even worse than the Sellier and Bellott. This time I had at least 20 issues out of 100 rounds. The bullets lodged into the chamber during cycling and sometimes during racking.
After the Magtech fiasco, Springfield emailed me a FedEx label. I printed it and attached it to a FedEx box. I am set to get the gun in 2 days, so the total turnaround time will have been 14 days. I am relying on Springfield's legendary customer service to come through. If you are interested, I can post an update after I shoot the pistol.
Brian V Yes please post your results
@@waynesouthwick I got the gun back and they said that the feed ramp was recut and polished. Also, the extractor was tuned. The feed ramp now has a mirror finish, and they throated the top of said feed ramp a little.
Last week, I fired the remaining 100 Magtech rounds and there were a few that lodged as before, but this time I could tug back the slide a little and the bullet would go into the chamber (an improvement). Even this behavior seemed to disappear after about 50 rounds, and the last 50 ran with no issues.
The next day, I fired 50 rounds of Sellier and Bellot 180 gr JHP, and there were no issues. I did not clean the gun before this use.
Just the other day I cleaned the gun and then shot 100 rounds of Sellier and Bellot 180 gr FMJ and there was exactly one failure to feed near the end of the 100. This one was a weird failure because I was able to push the slide forward into battery, easily with my thumb. I can't understand why the spring itself wouldn't have overcome the light force needed to battery. The only way to not blame the pistol is to suggest I did a limp wrist, and that's possible because sometimes I let my hands simply ride the recoil. Realistically though, the gun needs to break in because when I rack the slide I can feel a sticking point right after the slide falling downward (when pulling the slide backwards). I've seen videos where the slide action was "like glass" and mine certainly is not like glass.
I shoot at least 100 rounds every week, so let's give this a few hundred more and I'll report back if you'd like.
@@bvanpelt8
Let me know how it all worked out, i just sent one back to S&W
just saw your follow up... Thank you!
It was cringy as hell watching you put that gun back together
Agreed
My wife asked me why I was yelling at the video! 🤬
No doubt
@@6Sally5
LOL!!!
Everyone is mad at Springfield and rra for doing something two years ago that sucked obviously but grow up and give them a break. There's plenty worse gun companies. Smith and Wesson, Ruger, Daniel defense, have all betrayed the second amendment worse by preposing for 10 round restrictions and failure gun laws that hold no logical avility then Springfield armory yet I bet you all own atleast one of thier weapons. I personally am 17 so I don't own anything but I will own a m1a as soon as I'm 18
dat boi No, not everyone is mad. There are perhaps several from what l see in comments, but everyone? NO WAY. I'm one of the mad ones tho to be perfectly honest with you.
dat boi pay up. There’s a lot of companies to choose from so why pick one that has gone against their customers? They’ve made up for that incident but the fact that their organization paid 20+ grand 6 years ago to NRA F rated politicians means they’ve done a lot more than just help pass a bill to save some money. They were clearly intentionally causing resistance in ‘12-‘13 because Obama was the best gun salesman that’s ever lived. You mean to tell me they didn’t notice THEIR organization funding far left democrats before the ‘17 fiasco? Come on. Hope you get a good ass job to feed that 308. As your first gun I’d definitely recommend something you could get trigger time with but your choice. Socom 16 is the only thing SA makes that I like personally but like I said $1500 range toy that likes to eat steak. I’ll stick to hamburger.
@@iDeagles I fired their 10mm polymer hand gun and it was a good feeling gun. Lot of recoil (you should expect that from a relatively light gun shooting a round that can put down a bear) but the recoil wasn't too much to handle after a few shots to get a feel for it. I also own their Saint Edge rifle and have not had a problem with it.
as far as your comments about the controversy If you own a Ruger you are a hypocrite (web.archive.org/web/20030217213425/communities.prodigy.net/sportsrec/gz-papabill.html) . If you own a Smith and Wesson you are a hypocrite (www.actionamerica.org/guns/swbetray.html). Daniel Defense is the same (www.thetruthaboutguns.com/2018/03/robert-farago/daniel-defense-fix-nics/) savage arms owners (thehill.com/blogs/blog-briefing-room/news/385698-vista-outdoors-to-stop-manufacturing-guns) how about H&K (www.captainsjournal.com/2012/09/10/anti-gun-ignorance-from-recoil-and-hk/) I remember Remington got into hot water long ago over something as well similar to Springfield but I cant find an article for proof online. About the only companies I haven't heard something anti 2A come out for is Glock, FN and SIG.
iDeagles
They have publicly apologized. And they made it a point to let everyone know that they didn’t make the decision to make them donations. They have a few people that deal with that kind of thing. And those people were acting on their own, without the top people’s knowledge about the specific groups them donations went to. They also assured us actions like this would never happen again. And I’m sure somewhere down the line, people were fired and possibly even sued for this. Like you when this first came into public knowledge, I was pissed because I personally love SA, and felt like they stuck a big ass knife right in our backs. But in the end when everything was explained I did feel a little bit better knowing they aren’t traitors, and them themselves ere ignorant of them donations to them groups to begin with. That being said I gave them a 2nd chance. And as long as what they said and publicly proved is true, they deserve a 2nd chance.
No Breaks! They will betray us citizens again, at first chance to jump through hoops for whatever legislative reasons.
All of our firearm manufactures are under fire all across the land, even though there money built this great Country, and all of these Millenials just dont understand that our guns are there i phones, Galaxy's, and what the hell ever else there is!
The Firearms manufacturing community was the very first Silicon Valley!!!
Dont Forget That!
To bad is Springfield
Shut up
F.. you punk
it least it wasnt rock lmao
Peter K too bad you can’t see it was one or two bad apples not the same for their fine firearms .
Why not brag about your purchases from Dick's Sporting Goods next, and maybe sign up for Everytown while you're at it.
Never trust Springfield, they'll turn on the gun community at the next opportunity.
I’m no fan but do you even know about it?
By the same logic you clearly don't buy Ruger firearms and call them evil as well, right?
@Wayne Smith I actually forgot about that one thanks for the assist.
Chad_83
Springfield actually publicly apologized to all of their customers/fans. Yeah, what they did was shit. But along with a public apology they assured us these kinds of actions would never happen again. And I’m sure somewhere down h line a few people were fired and possibly sued.
Again... Springfield, Colt, = Liberal, Treasonous, Cowards! That cant be trusted!!!
Apologize all you want , it still dosent change the facts...
AMERICA STRONG...STAY FREE..LONG LIVE THE REPUBLIC.!
Duh!
man i really cant stand watching someone drop the hammer against the frame over and over again
nice gun though