Mini ITX Gaming PC Build | SSUPD Meshroom D | Noctua NH-D12L | Ryzen 7900 | RTX 4070
Vložit
- čas přidán 16. 07. 2024
- This is my first ITX build and I really enjoyed assembling components in a compact system.
Due to several reasons, I couldn’t run temperature tests. However, the cooling may be sufficient with a perfect mesh case since the CPU and GPU don’t produce much heat. Thank you for your understanding!
If you have any advice or ideas for SFF (Small Form Factor) builds, please leave a comment!
Chapter
00:00 - Intro
00:29 - Motherboard Assembly
02:10 - Meshroom D Assembly
04:15 - Cinematic Mode
Main Parts
Case - SSUPD Meshroom D Charcoal Black
CPU - AMD Ryzen 9 7900
CPU Cooler - Noctua NH-D12L chromax.black
Thermal Paste Guard - Noctua NA-STPG1
Motherboard - ASUS ROG STRIX B650E-I GAMING WIFI
GPU - NVIDIA RTX 4070 Founders Edition
RAM - TeamGroup T-CREATE DDR5-6400 CL40 EXPERT
SSD - TeamGroup T-Force CARDEA A440 PRO 2TB
Bottom Intake - Noctua NF-A12x15 chromax.black.swap x2
Rear Exhaust - Noctua NF-A9x14 chromax.black.swap
PSU - Corsair SF750 80 PLUS Platinum
*The overall price is roughly 2100 USD
Specs
SSUPD Meshroom D Charcoal Black shorturl.at/skQ9R
ASUS ROG STRIX B650E-I GAMING WIFI shorturl.at/ttfAH
Noctua NH-D12L chromax.black shorturl.at/2S8eD
Noctua NA-STPG1 shorturl.at/2wE6q
Please like and subscribe for more!
Thanks to SEORIN C&I, STCOM and Noctua for supporting this video.
#meshroom #noctua #itxpcbuild - Věda a technologie
Nice that Noctua is finally making a D12L Chromax, looks so much better.
Yeah, that's right!
I really love the completely black look💜🖤
Wow, this video is amazing! It perfectly balances ASMR and trendy PC building content. Keep up the great work👍
Thanks a lot bro💜🖤
나는 여기 영상 볼때마다 항상
이런 영상미의 채널이 한국에도 있다는 것에 놀라고,
이 정도 퀄리티의 영상 채널 구독자가 아직 K 단위에 있다는 것에 매번 놀란다..
오늘도 잘 보고 갑니다.
고맙습니다!!
좋은 말씀 정말 감사합니다.
앞으로 더 멋진 영상으로 만나뵙겠습니다.💜🖤
Dude, I thought it was the NH-D15 but it's acutally the NH-D12L. I really like it! Great video!!
Yeah, that's right!
It's a really cool CPU cooler!
@@SNAPSHOTREVIEWpun intended?
Amazing Video man! Great job!!!
Wow~~ Thank you so much💜🖤
AWESOME BUILD AND GREAT VIDEO AGAIN
Thank you so much for your support💜🖤
미니 케이스 빌드 쉽지 않은데 잘 녹여주셨네요!
하이 파파님~
댓글 감사드려요💜🖤
간만에 올리셨네요! 미니미케이스 처음 도전하셨군요 ㅎㅎ 퇴근길에 너무 힐링됩니다~
안녕하세요 성철님!
즐거운 주말 보내세요.
또 한 번 지리고 갑니다. 캬!!
하이염~ 방문 및 댓글 감사합니당~
와... 멋지네요.. ㅎㅎ 한 대 장만하고 싶군요 ㅋ 최고 !!!
댓글 감사드려요!
저도 이번에 SFF 처음 빌드해 보는데 하나 장만하고 싶더라고요~
Somehow build like this satisfy my OCD.
Thank you so much!
Glad you liked it💜🖤
Well done, boy! It's more expensive that it looks😊
Yes, it is! Cheers bro!
누가 보면 귀엽게 생긴 대형 스피커 인줄 알겠네요 ㅎㅎ
ㅎㅎ 감사합니다~
즐거운 주말 보내세요💜🖤
Very good video bro as always! Although I don't know why this one had a little less image quality... am I right?
Oh! Thank you so much bro!
It's really hot here, so I set the lighting low and increased the ISO.
Therefore, you might notice a difference in quality.
Thanks for the feedback💜🖤
@@SNAPSHOTREVIEW o I see bro
R3SYS RC1900 WHITE AMD AM5 출시 되었는데 7800X3D 그리고 7900X3D에서도 게임용으로 잘된다더군요
The thing I like about mesh is all the dust that goes in + the noise that gets out. Also if you get a drink spill its sure to go right to the electronics with little to no diversion. Whats not to like?
Also by not putting a object in the finished product you get no sense of scale. Put a quarter next to it and find its smaller than a quarter WOW. Or maybe its bigger than a bucket of KFC we shall never know.
Thank you for the great advice!!
I'll keep your suggestions in mind for the next video, which will also be an SFF chassis!
@@SNAPSHOTREVIEW Really that little case and MB is all you need and easy to carry around/move. I went bigger mesh with same gpu and x3d.
Amazing video! Is there space for a standard 92mm fan at the rear? and can u explain why u didnt use 140mm fans at the bottom?
Yes! Depending on the CPU cooler, you can install a 25mm thick 92mm fan.
It's possible to install two 140mm fans, but I chose the Noctua 15T 120mm fans instead. Since this is my first time with an SFF build, I decided going with a smaller setup.
@@SNAPSHOTREVIEW so u think a 25mm thick 92mm fan would fit with that same cooler ?
I wish i have one :)
I wish I had one too, bro💜🖤
is that the stupid case where there is no bottom panel, just a dust filter? I hate that case so much, such a stupid flaw.
Gotta let the GPU breathe.
@@KurosuGon They could have add a bottom solid panel with hole pattern like the terra fractal's side panel, or bottom panel with square holes like the ch160. A case with no bottom panel is just unacceptable to me
It's structurally similar to other cases that focus on bottom cooling fans.
I don't find it particularly unusual!
Thanks a lot for your feedback 💜🖤
first
Thank you so much!
Was the rear fan exhaust or intake?
Oh, I used it as an exhaust fan!
Thanks a lot👍
It would be perfect if it's 40 Super series card 🙌
Yeah! It's my first SFF build, so I used the smallest GPU of mine✌
@@SNAPSHOTREVIEW Your RTX 4080 Super doesn't fit in the case perhaps ?
@@azbzmy It's possible without bottom fans.
However, it's very tight with the panel and we need something like a 90 degree adapter for the 12vhpwr.
Можно узнать саундтрэк в конце видео.
Thanks a lot!
Is that support hdd 3.5 ?
YES! It's possible to mount 2 or 3 HDDs in front of the PSU👍
여기에 4080 Super 는 무릴까욤? + 7800X3D
안녕하세요~
그래픽카드 최대 장착은 최대 337mm인데 두께에 따라 하단 흡기가 어려울 수 있을 것 같아요. 하단 흡기가 해당 케이스 최적 방식이지만, 4080S를 쓴다면, FE 정도 크기에 전면 흡기를 고성능 팬으로 사용하면 괜찮을 것 같아요.
@@SNAPSHOTREVIEW 그렇군요.. 잘알겠습니다.. 감사합니당 ^^
왜 같은 케이스, 같은 쿨러인데 제건 쿨러쪽이 다 안 닫힐까요. 영상을 봐도 모르겄네
안녕하세요! 헉~ 아직도 안 닫히나요? ㅠ
쿨링 팬을 최대한 브라켓에 닿게 해야 닫힐 거에요.
패널이 사실 아주 살짝 닿아요.
ㅈㄴ 귀염뽀작하네
ㅎㅎ 감사합니다👍