The Ultimate Aesthetic PC Build | HYTE Y70 | Lian Li Uni Fan TL LCD | AMD 7950X3D | RTX 4080S
Vložit
- čas přidán 20. 06. 2024
- It's my dream PC with the perfect combination of Lian Li's RGB cooling fans and HYTE's top-notch aesthetic panoramic fish tank case.
I'm not a big fan of RGB, but the Lian Li Uni Fan TL series is great for setting up a unique vibe.
The Hyte Y70 has been released without an LCD screen. If you're considering a panoramic case free from build constraints and cooling performance issues, it's worth considering.
00:00 - Intro
00:12 - Motherboard Assembly
02:19 - HYTE Y70 Assembly
05:16 - Cinematic Mode
06:54 - Thermals
Main Parts
Case - HYTE Y70 Black
CPU - AMD Ryzen 9 7950X3D
CPU Cooler - Lian Li Galahad II LCD
Motherboard - Gigabyte B650 Aorus Elite V2
GPU - Nvidia GeForce RTX 4080 Super Founders Edition
RAM - Essencore KLEVV DDR5-6000 CL30 BOLT V
SSD - Crucial T500 M.2 NVMe 2TB
Side Intake Fans - Lian Li Uni Fan TL LCD 120 Reverse x3
Bottom Intake Fans - Arctic P14 PWM x2
Radiator Fans - Lian Li Uni Fan FAN TL 120 x3
Rear Exhaust Fan - Lian Li Uni Fan FAN TL 140 x1
PSU - Antec NeoECO NE1000G M ATX 3.0
Extension Cable - EZDIY-FAB Sleeved Extension Cable Kit (16AWG)
Specs
HYTE Y70 Black bit.ly/4aWUu9a
Lian Li Uni Fan TL bit.ly/49LJuL6
Lian Li Uni Fan TL LCD bit.ly/3UtCjCV
Essencore KLEVV DDR5-6000 CL30 BOLT V bit.ly/3VZmMvq
Gigabyte B650 Aorus Elite V2 bit.ly/4aGHV1A
Crucial T500 M.2 NVMe 2TB bit.ly/49rT9pM
Antec NeoECO NE1000G M ATX3.0 bit.ly/3xApgGC
Please like and subscribe for more!
Special thanks to SEORIN C&I, NEWRUNGLOBAL, and JCH for supporting this video.
#hyte #lianli #unifan #7950x3d #rtx4080super - Věda a technologie
![Touch, Feel, Peel the HYTE Y70 Touch 4K display [RTX 4090 | Ryzen 9 7950X3D]](http://i.ytimg.com/vi/txYPRwFTdjI/mqdefault.jpg)
This is one of the most beautiful builds I have seen in a while... well done
The cinematic visuals are bloody awesome! The music is really great too! Well done❤
Oh thank you so much my man💜🖤
Spent hours on my build today. Just finished your video and I'm starting again from scratch. Very, very nice. Thank you for the inspiration.
I appreciate your support!
Let me know if you have any questions👍
No way you spent money on a build and decided "fuck it im restarting"... You guys have zero financial literacy.
@@triliner254 I meant planning my build.
Exactly how i would build one if i could.. perfect to the last part!
Stunningly beautiful and well shot!!!
Oh!! Thank you so much!!
I'm really glad you liked it 💜🖤
Awesome, video with amazing back ground music!
Oh! Thank you so much!
Glad you liked it 💜🖤
Those Lian Li fans always make builds look super clean
LianLi always on top
What a beautiful build, and a video that is equally beautiful in its simplicity, immediacy and professionalism.
A compelling argument for every component that you've chosen, without speaking a word.
Definitely a channel that deserves more exposure, as this content is stellar.
I'm subscribed. ❤🔥👍💪
Oh, thank you so much!!
Your comment is really impressive!!!
It's truly an honor that you subscribed💜🖤
광고보다 더 멋진 빌드를 보여주시니 눈호강이 절로 되는 주말입니다!! 한작품 한작품 너무 좋네요!!
오호 파파님! 늘 좋은 댓글 정말 감사합니다.
즐거운 주말 보내세요💜🖤
Brick don’t understand. Brick want a translation.
@@Brick-rw1yo didnt know they korean lul
Man!!! this put a big super smile on my face cuz its lime I'm watching my own build in black instead of black i love awesome work
Oh!!! Thank you so much for your great comment, bro💜🖤 Love it!!!
looks like it’s straight outta tron that’s cool 🔥🔥
This is a beautiful beautful build just enough to make a statement !
Thank you so much for your support!!
구독자 100명일때부터 구독했고, 오랜만에 들어왔는데 엄청 성장하셨네요 !
한국에서 나오기 힘든 외국 감성이라 그냥 보면 외국 유튜버인줄 알겠읍니다.
정말 멋지십니다!
오호 정말 감사합니다❤
제가 본 PC중에 단언컨대 가장 깔끔하면서도 화려한 PC네요.
전체적인 매트한 블랙 톤에 리안리 TL 시리즈 팬의 라인 LED와 팬 가운데 자리한 메탈 베어링이 인더스트리얼한 느낌을 주면서도 현대적인 감성을 더해주어서 보는 것 만으로도 기분이 좋아집니다.
영상미도 너무 훌륭해서 하나의 작품을 보는 것 같았어요 :)
와~ 멋진 댓글 정말 감사합니다.👍
PC 부품에 대한 이해와 분석이 엄청 전문가이시네요 :)
자주는 아니지만, 종종 빌드 영상을 올리고 있으니 자주 놀러오세요💜🖤
와 지금까지 화이트 기반의 빌드가 전반적으로 이쁘다는 생각이었는데 싹 사라지고 온전히 감상하게되는 너무 이쁜빌드네요.. 대박입니다..
오호 정말 감사합니다. 댓글이 많은 힘이 되네요 :)
Finally a black hyte y70 build without the touchscreen. It just looks so much better without it
beautiful system!
Great vid
전원버튼에 led는 연결안하거나 해서 끄는게 더 예쁠 것 같네요. 진짜 너무 예쁘다,,
오호 감사합니다.
개인적으로 Fractal의 광팬이지만, HYTE Y70의 감성은 정말 인정입니다💜🖤
Bro, I still have no idea how you're only at 2k subs. Content is SOOO good.
Thank you for your support.
I think it's just the right number of subscribers now.
Hope that someday many people will watch my videos 💜🖤
It means, he deserve 1mil subs this year. Keep it up bro 🔥
just copying @Mr Matt Lee
@@qazxsw60915 true2 they all 'others belongings' basically, im just presenting them in my ways, hope they at least entertaining
i dont think people will reach success imitating that way really, common working way is the 'copyright safe' contents
최고의 어항 케이스에 스냅샷님의 고퀄리티 영상 콜라보군요. + +
하이염~ 오호 감사합니다 💜🖤
your video reminds me of what my passion used to be.
My profile pic is a caselabs sma8 with a 5960X and 3 980 ti's.
planning to go back to air :) gonna pick up this hobby again after falling in love with this case.
Oh!!! PERFECT!!!
Wow beautiful
Cheers bro👍
very cool and aesthetic build, nice video. enjoy :)
Oh! Thank you so much bro!
The Jonsbo TK-1 looks absolutely crazy, would love to see you build in it
I don't have any Jonsbo build plans yet, but I'll definitely try it someday!
Btw, thanks for your info💜🖤
Hey, amazing video again, and amazing quality.
If you don't mind me asking, what camera do you use, the footage looks amazing.
Oh, thank you so much!!
I use the Canon R6 Mark II with RF 24mm F1.8 and RF 35mm F1.8 lenses. It's a great combo for shooting in tight spaces.
Great video. Auto sub👍👍
Oh!! Thank you so much for your support and sub👍👍
Sweet ❤
Thank you so much💜🖤
A tip: undervolt your cpu and youll be at max 70 degrees, thats the most handsome build ive ever seen, no cheap white or rgb parts.. perfection itself
Thanks a lot for your protip!
I'm so glad you liked it, man💜🖤
감사합니다
와 감성 최고네요 ㅎ 어항에는 리안리 팬이 최고같아요 스냅님 영상 너무 기다려집니다 자주 올려주세여❤
안녕하세요 성철님!
매번 정말 감사합니다.
어떻게 될지는 모르지만, 기회가 되면 많은 영상 올려볼게요👍
great showcase. my wetdream pc
Thank you so much!
I'm glad you liked it💜🖤
I love it!
Thank you so much!
I'm glad you liked it💜🖤
I have a Red Y70 Infinite on Preorder, 100% picking these fans and this mod as an inspiration. Going to be the houses Ai Server running UnRAID , I have already named it Ian (Got my reasons) and Ian shall be the Master Control Program. Thinking Red Tron build. Maybe make the whole house a Tron mod. OK I need to do less gummies.
Thanks for sharing your awesome story!
I hope you have the best build💜🖤
고급 그 자체
정말 감사합니다 💜🖤
I took out rectangle glass , and put 3 fans right there on mine
너무이쁘네요 견적서도 같이 올려주시면 되게 좋을거같아용 ㅋㅋ
아! 좋은 의견 감사합니다.
견적서는 아니지만, 이번 업로드 영상부터 전체 금액 정도 표기했어요!
멋있습니다!
감사합니다💜🖤
Wow~!!!
💜🖤
아주 아주 아주 멋짐~~~~ 팬가격 비싸다 생각하다가 . 지금 본체에 도배 되어있는 흑투아 가격생각하면 또 가성비? 라고 생각들기도 하네요
안녕하세요~ 리안리 TL LCD 없는 모델 P28과 거의 유사해서 감성 + 성능 최고같아요 💜🖤
깔끔한 조립에 군더덕이 없는 영상 잘받습니다.
똑같이 조립하면 비용이 얼마나 들가요~??
오호~ 안녕하세요!
댓글 감사드려요.
정확하지는 않으나 대략 4백 중반? 정도 되지 싶어요.
안녕하세요, 빌드 영상 잘 봤습니다! 혹시 해당 리안리 CPU쿨러 파이프? 호스?가 측면(6:52 SIDE INTAKE로 표기된곳)설치까지 길이가 될 것 같은가요?
상단 배기에서 수랭 쿨러 호스는 보통 400mm 정도라서 말씀하신 쪽까지 충분한 길이가 될 것 같습니다.
tl lcd 팬에 넣으신 gif 파일은 직접 제작하신건가요? 저도 비슷한 구성에 화이트라 저런 느낌의 gif 를 넣고 싶은데 혹시 구하신거면 어디서 구하신건지 궁금해요
안녕하세요 :)
giphy.com/ 여기 들어가셔서 black shape 등으로 검색하시면 원하시는 것 나와요.
i need to upgrade my fish tank
it can fit 10 fans but only support top 360 aio and bottom 360 aio
영상 퀄이 너무 좋네요~ 혹시 05:16 - 시네마틱 영상 여기부터 나오는 bgm 알수 있을까요?
오호 감사합니다.
문의해 주신 BGM은 Oliver Michael - ever since - Instrumental Version 입니다 :)
@@SNAPSHOTREVIEW 감사합니다~~~~~~~~~
Ohh fck looks amazing
Oh! Thanks a lot👍
I was building my first pc for the o11 vision till I saw this vid and switched parts to basically copy you! Completely changed my rgb obsessed view. I am putting it together now and have hit a snag. How do you control the AIO fans and the case fans on the same controller? I thought the radiator fans needed to go in the CPU fan header but the connector is wrong as I switched the fans like you did and so they only have a 7 pin connector.
Am thinking I will have to use a separate hub with the AIO fan to connect to the CPU fan header with the case fan hub into a sys fan header. The alternative would be to use the single hub and have all fans tied to the CPU temp or the case temp but not both. FYI I am pretty clueless about this stuff and have been on CZcams and google for 3hrs trying to puzzle it out so I may be wrong about a few things! Any pointers would be appreciated.
Hope you've resolved this issue but if not... please check 04:50 first!
The pump PWM connector is simply to send information to the motherboard.
Lian Li stuff are controlled using their controller and managed through L-CONNECT3.
If you're using fans from the same TL series as mine, you can control them with the single TL controller and you need to use L-CONNECT 3.
If you're using different Lian Li fans, you will have to use the controller for those fans.
Appreciate the response. Haven’t yet finished this as don’t have a lot of time during week but will finish it tomorrow. Ok so I don’t need MB control as L connect can manage the fans separately - good to know. Luckily I even copied your choice in fans so all are TL and can connect to same hub. Cheers
nice build.:D im just wondering, the radiator push at 6:54 thermals, does it push air out or inn? i may sound as a noob but the other ones where clear.😅
Generally, "push" refers to pushing air through the radiator, meaning it’s pushing air out.
Typically, this is used for exhaust.
@@SNAPSHOTREVIEW aight, then i tought right. nice thank you for the reply.:) new sub.:)
what camera and lense are you using? Nice videos mate!
I use the Canon R6 Mark II with RF35mm F1.8 and RF24mm F1.8 lenses. I'm still inexperienced with handling the camera, but I'm interested in it.
Cheers mate!
@@SNAPSHOTREVIEW thx! Keep up the great work
The GA II LCS 360 comes with fans pre-installed, did you sell these off to replace them with the uni fan tl 120?
where do you get your animations for the LCD screens?
giphy.com/ Please check out this link!
When you search for 'black shape,' you'll find many similar files.
❤
💜🖤
ou nice work!
Cheers bro👍👍👍
Whats the plastic film you are putting over the cpu? Sorry im building my first pc soon, and wanted to know what that is lol
Hi! Check this out!
noctua.at/en/na-stpg1
@@SNAPSHOTREVIEW thank you sir
How did you connect both controllers (AIO and 3pack) since you need three usb connections? I only have two on the same motherboard.
The TL fans can use four ports on a single controller.
I used three ports, one each for AIO, rear, and side fans.
Hope this helps💜🖤
what was the plastic piece you put on top of the cpu? ive never seen it before
Check this out!
noctua.at/en/na-stpg1
Bro At 1:55 why you put a plastic film on the cpu surface? Is that the right way to install it?
Yo! Please check this out!
www.amazon.com/Noctua-NA-STPG1-Thermal-Paste-Cleaning/dp/B0BGS66D17
👌👌👌👌
💜🖤💜🖤
Hi I was wondering how much money did it cost you to build this system
👍👍👍👍👍👍
🙌
Damn I just built in this cause using those fans and aio lol
Oh, that's really cool! lol~
Isnt HYTE also comeing oput with there own version of Lian Li Uni fans ?
Maybe later on, it could happen.
I think that they recently released an AIO liquid cooler,
but I haven't seen cooling fans yet.
Hi,
Just wanted to ask where did you get those loop in your LCD fan.
Thanks,
Hi! If you go to giphy.com/ and search for 'black shape' or similar, you can find what you're looking for👍
@@SNAPSHOTREVIEW Thanks a lot.
My build is similar to this one. All black with Lian Li Uni Fan FAN TL. However is still have 1080ti and planning to upgrade very soon. Do you think the MSI 4080 super expert will be aesthetically pleasing with this build?
Can we give this man some more Subs please geez man
Oh man~ I really appreciate that!
So where’s the intake fans? Looks fantastic though. I have the same fans.
06:54 Please check out this timeline!
@@SNAPSHOTREVIEW aaaah you got the reverse. Didn’t catch that. Well done.
리안리 유니팬 너무 시끄러운데 조용한 다른팬 추천해주실수 있나요?
유니팬이 PWM 조절을 하면 나름 괜찮은데요.
감성을 포기한다면, ARCTIC P12 ARGB가 조금 괜찮긴합니다.
리안리 유니팬 P28의 경우 배기로는 괜찮은데 흡기로는 소음이 조금 있어서요.
소음에 민감하시다면, 대안은 사실 녹투아 A12x25 밖에 없긴해요.
Hi, may i ask if what did you put before termal paste? I like a glass? Thanks
It's a thermal paste guard!
noctua.at/en/na-stpg1
@@SNAPSHOTREVIEW oh i see. Thanks.
What's Rgb code for the teal colour?
I chose the white colour on the L-Connect3.
It looks slightly blue due to the surrounding lighting and white balance💜🖤
How did u connect non lcd fans to lcd fans did u use one hub or 2 separate hubs
Did u have to configure in bios to get non lcd fans to come on
The TL version is compatible with both LCD and regular versions.
Therefore, I used a single controller. All fans in the video are using L-CONNECT 3.
rgb 번쩍번쩍 싫어하는 사람이라 이런 느낌의 잔잔바리를 원했는데
혹시 저런 레퍼런스 제품처럼 생긴 그래픽카드는 어디서 구해야 하나요?
오호 안녕하세요!
11번가 "리더스시스템즈" 검색하시면, 원하시는 GPU 찾을 수 있어요.
how's the lian li software and the noise of the pump?
I could hear noise at the maximum pump RPM.
The lian li software is fine and stable.
Did you require any header adaptors for this build? If so can you supply which one's?
I didn't use any additional adapters but I used a PWM fan splitter cable (1 to 2) for the bottom ARCTIC P14 fans.
@SNAPSHOTREVIEW thanks!
Wish my parent let me buy those parts and build the pc.
Oh, best of luck bro💜🖤
When I plug my non lcd lian li fans into the v2 controller they don’t turn on or light up
The port number 1 is incompatible with LCD one, so you should use with another ports. If the connector is loose, the light might not come on. btw, did you fix it?
혹시 갤러헤드 lcd에 효과는 어떤걸 사용하시는건가요? 동일한 효과 찾고싶은데 안 보이네요
안녕하세요!
giphy.com/ 들어가셔서 키워드를 Black circle 등으로 검색하시면 유사한 것 많이 나와요!
@@SNAPSHOTREVIEW 감사합니다!!!
금액을 지불하면 PC 빌드도 해주시나용?
안녕하세요~ 아쉽지만, 취미로 영상을 제작하고 있어서 조립 대행은 하지 않아요.
What do I need to know for installing so many fans?
There aren't any specific guidelines, but I think focusing on the balance of intake and exhaust, as well as the direction of airflow, should be sufficient.
@@SNAPSHOTREVIEW From what I know, fans need to be hooked to the motherboard and if the connectors are already used, I need an adapter to chain more fans into channels, right?
Noob question but shouldn't the bottom fans be exhaust fans and not intake fans? Why draw dusty air in through the bottom? Just exhaust warm GPU air out of the case instead, no?
In general, since hot air rises, it's more efficient to have bottom intake and top exhaust. It's similar to a chimney effect.
Of course, it's not a 100% correct way for everybody. However, for the purpose of directing airflow, if the bottom is considered for exhaust, it's better to have intake at the top.
Hope this helps!
@@SNAPSHOTREVIEW Thank you! It may be completely wrong that I'm thinking this way, but if we draw air in through the front, why not draw air in through the top, too? That's because those are the two most unobstructed panels of where to draw air from (not including cases that have fans on the side panel). Also, the back of the case has I/O and wires obstructing air flow. So, maybe it's best that intake fans be placed at the top and front and then the air should be exhausted out through the back and bottom.
Do the Lianli fans connect to Hyte's Nexus?
I guess they have different specs, it might be difficult.
How are their visuals on those fans?
The visuals are amazing!
There's some CPU usage for this but it can be ignored.
how to make sure that 4080 pin does NOT burn ... does lower the volt help ?
It's very rare for the 16-pin connector to melt on the RTX 4080.
If it happens, it's more likely with the RTX 4090 but it's not common as well.
It's just a matter of luck. No worries man!
@@SNAPSHOTREVIEW thanks 🙏
What is yoyr camera? Perfect
Hi! I use the Cannon R6 Mark II.
@SNAPSHOTREVIEW omg it so expensive for me. Good luck
reminds me of tron 0-0
👍
💜🖤
do i need to replace the radiator fans or no
Which AIO do you use? Generally, if you want less noise or slightly better cooling performance, it’s a good idea to replace it.
wait why did you put a transparent film on the cpu, doesnt that makes it hot or somethn
It's a thermal paste guard and doesn't affect it at all.
noctua.at/en/na-stpg1
oh alright, i was alarmed cuz builders remove the transparent film from the cpu cooler and i saw u put one, was like "huh?", anyways good to know lol
Gonna make the same build ehhe😂
Oh, that's a great plan!
@@SNAPSHOTREVIEW but I'm struggle between the 7800 and the 7950X3D... But all the rest is the exact same ☺️. Great video BTW
That 3 side fans are intake? Look like reversed.
Yeah! That's right!
06:54 You can find more information👍
I've also changed the fan info in the description!
is the exhaust on the back 140mm? also if i put rgb fans on the bottom part, will it be visible?
Yes, it's 140mm. I don't see the RGB on the bottom fans at all.
@@SNAPSHOTREVIEWi have one more question, is it okay if the 3 bottom fans are the only intake? the rgb fans im gonna use doesnt have reverse version so i might make the 3 side fans exhaust
What CPU and GPU are you using?
if that works, i hope you could also give advice what speed i should set them to
@@SNAPSHOTREVIEW r5 7600 and colorful igame 4070 super ultra.
i also will use aio on the top which is gonna be exhaust too. for the rear part, im not sure yet if ill put fan there but i might put 1x120mm exhaust
Will this build work in a y60?
The Y60 supports a maximum of two 140mm side fans and one 120mm rear fan.
Except those things, it should work!
Be carefully to plug your grafic card like this, dont go left and right only straight into the the card.
Thank you so much for the great advice!
Can you make video for pc for 2200 dollars It is black and red
hi can u help me on how to connect the fans to the hub, my side fans arent going 😢 pls help and also where can i plug the arctic fans. PLS NOTICE AND HELP ME I BADLY NEEDED IT
The Arctic fans should be connected to the PWM header on your motherboard via the hub or directly. Anyway, when using the hub, make sure to check if it works well or not.
@@SNAPSHOTREVIEW do u mind calling you or discord to help me please?? i really need the help
im a beginner so, i would gladly appreciate your help. please :(
@@SNAPSHOTREVIEW please
How much would this cost overall
Not sure but it seems like around 3200 USD?
is this under 2.5k?
We built my wife's Y60 with all Lian Li stuff including 24 pin and 8pin(I took apart and fitted to the 12 pin) streamers
7800x3d with 4080 Super
Cost right around $2500 with a 2Tb M.2 drive
All water cooled with distro plate to boot.
@@andrewsolis2988 ty!
that is one expensive nite light
U SELL THEM?
No, I don't.
I'm doin' it as a hobby.
🩵🩵🩵🩵🩵🩵
💜🖤
using a b650 motherboard with 7950x3d is such a shitty choice
Got it, any recommendations?
@@SNAPSHOTREVIEW aorus x670e/msi mpg x670e/msi meg x670e
huh.. chinese product, cheap stuff with high price...they all just scammed you😂