TIMELAPSE FULL ATV ENGINE RESTORATION! 1985 YAMAHA MOTO 4 200
Vložit
- čas přidán 12. 01. 2024
- I put together a full Timelapse video of the entire engine restoration. 50+ hours of work in 17 minutes!
If you like what we're doing here at Toy Shop and would like to support us then be sure to check us out on Patreon! www.patreon.com/Toyshop9665?u...
Using these links will help me out!
Toolbox Widgets
1/4" drive Socket Widget - a.co/d/29Ux2rs
3/8" drive Socket Widget - a.co/d/5cCi3mT
1/2" drive Socket Widget - a.co/d/8EsPl9s
Screwdriver Widget - a.co/d/5F7EB5Y
Wrench Widget - a.co/d/0qyVzIM
Wide Motorcycle Scissor Jack - a.co/d/fQLQypt
Narrow Motorcycle Scissor Jack - a.co/d/cGDv73u
Umbilical tank setup;
Moton Pro Aux Tank - a.co/d/2hMd2xe
IV Stand - a.co/d/hHiSSGU
Metric #2 Phillips - a.co/d/1qhV0me
Slide Hammer - a.co/d/e8bu3yW
Camera I use to film - a.co/d/9d39Jjm
Mic I use - a.co/d/0V4vNZ7
Visit us at www.toyshop9665.com to see what we're up to and to check out everything Amsoil has to offer! - Auta a dopravní prostředky
Awesome, I’ve been waiting for this video for a while!
Well done! 👏👏👏
👌
Is there No gasket for the middle drive gear?
No I had to use gasket sealer. 🤷🏻♂️
What book/website did you use for the engine diagram
www.partzilla.com I use it for pretty much everything!
Figured i would comment on your latest vid about this subject. Google seems to take me many different ways. So im gonna ask. Do you think the 200 and 225 head will interchange? Was gonna order a webcam for a 200 but all they have is for a ytm225. With a 10.25:1 piston id like to at least throw a stage 2 cam in since im doing the whole thing.
I’m not sure if they’ll interchange 😅 the cam wasn’t that expensive right thru Yamaha. I use partzilla.com to order stuff. Or go to a dealer. The 200’s definitely aren’t really designed to be hopped up. I haven’t seen any performance mods for them.
@@ToyShop9665 they make a weisco 10.25:1 for a stock 67mm bore 200, and know the jug from a 225 will interchange but case needs bored. But i never been inside a motor of a quad before figured maybe different pushrods or something in a different way. Possible lack of oiling idk
@@codyedgington6852 ya not really sure. There’s no push rods. And you’d have to know how it’s gets oil to the top. Maybe someone on here will chime in with an answer!