Ashdown ABM-500 Evo III 575-watt Bass Head Demo - Sweetwater Sound
Vložit
- čas přidán 14. 07. 2024
- Check out the ABM-500 Evo III in more detail right here: www.sweetwater.com/store/detai...
Mark Gooday from Ashdown presents the ABM-500 Evo III tube bass amplifier help, demonstrated with the help of renowned bassist Jaquo III-X. Enjoy the demo, then check out the ABM-500 in more detail at the link above! - Hudba
Been gigging this exact rig for about 2 years now. Wouldn't use anything else. I love it. Even gigging pubs I have my output just over half way, so powerful!
Mark Gooday is one of the bass amp worlds greatest!
I really like Ashdown. I just wish players like this guy would turn down that treble. It's too much, sir.
Agreed - a bass head demo with a bass player that plays the most obnoxiously treble bass possible. Got no idea how the amp actually sounds.
Sick of these slappy, plucky guys!!
I played a gig with the 1000....LOVE IT!!!!
yeah..probably not the best demo,but the 500evo111 with 410h cab is just fantastic to play through..best I ve had to date.thanx
What's deal with using an octave with bass lately? It's a stupid idea.
Slapping - next video please.
ive got the ashdown jj 500 brilliant but its connected to a warwick 400 8 ohm cab. i have to have the amp on full blast to play a small pub and the meter does not move do i need to use an ashdown cab?
AMEN!
I own 2 Ashdown Amp heads. The dog's danglies
What about the "sub out" jack at the far right?
Amen
Hi, I've bought a abm 500 evo II with 600W 4x10 cab. now I want to connect another 1x15 300W to my amp. but the 15"cab doesn't have a parallel output, and I have only 1 speakon out & 1 jack output from the amp. How can I connect the 2 cabs in parallel? greetz
+Ronny OnBass Thx!!
Ashdown or Gallien-Krueger?
Can I use this with a guitar 2x12cabinet ? Or straight into a speaker simulator or even Direct into my audio interface ?
Hey, Lars. Thanks so much for commenting. While you can use the DI out on these straight into a mic input, I would not recommend running this through a guitar cabinet. The speakers in guitar cabs, as opposed to bass cabs, are often voiced to not extend as low into the frequency spectrum, and do have a lower wattage than most bass speaker cabinets.
Mickey Cushing, Sweetwater Sales Engineer, (800) 222-4700 ext. 3024, Mickey_Cushing@Sweetwater.com
Sweetwater understood ! Thank you
Hi. Just bought a second hand ABM EVO II 500 - planning to use it with my Trace Eliot 4 x10H cab and 1 x 15 cab. Is that ok?
Hello! Yes, that should be fine.
Thanks for the interest!
Kevin Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Kevin_Spunde@Sweetwater.com
Here's some bass with some low end.
Jauqo III-X, Track 7, from Trioplicity
+JauqoIIIX - It'd be nice if you let us know what amp you were using.
In the video I'm using the Ashdown ABM EVO III 550 watts head.
the combo version with this head has 8 ohm so will have less watts than 575??
Indeed it does, you have to add another 8ohm cab to get that 575w
Can I use this head with an 8 ohm 410 Rumble cabinet?
Hi! Thanks for your message, hope you're well and safe.
Minimum load for the head is 4 Ohms, so yes, this is a safe combination.
Please contact us direct with other questions as you have them!
Robert Williams, Senior Sweetwater Sales Engineer, (800) 222-4700 ext. 2371, robert_williams@sweetwater.com
turn the flipping treble down!!!
It says Line Out :)
People today call tone distortion
Anyone using this amp with ampeg svt classic 410he?
In the very beginning I thought he was trying to play a funky Fresh Garbage by Spirit...but no.
a bit of a useless representation to a lot of bassists if you only show the sound with slapping...
except a little tune in the end
Kinda like when guitarists just solo and show off in demos. Kinda pointless hey.
I want power in my bass amp, not that choppy treble driven garbage
Would sound better with a proper bass player.
Good Gawd! Could you maybe have him actually play some bass "notes" for a couple of minutes? Instead of whatever it is that this guy is doing? You know, like the bassists that you mention that use the stuff?
Sheesh! That is one annoying clip.
a gk 800rb still kills this
great but expensive and guess macca got it for free
What is with all the crap slap playing. Not everyone wants to hear that style. You cannot get an accurate feel for the sound of any amp with that technique. Any amp can sound like that with that style of play.
If 3 and X are in your name, you’re a joke
but why sliders on some EQ and knobs on the others?
Very good amp however built in china. I think sound demo would be rather better with state of the art Jazz Bass Fender or Music Man Stingray. The references.
Get with it. The stuff made in China today is as good as anything made anywhere.
shakeAbooty88
Agreed. I've got a GK 4x10 MBX cab made in China and it kicks. Run my Ashdown head through it. I also heard somewhere that Chinese production is raising in cost because the new generation doesn't actually want to become factory workers. Uh oh
Had it, it sucked.
Sounds as bad as the Mesa bass demos. ughhh
Another bass amp review ruined by slap bass.
Kinda sick of funk bass playing.
GARBAGE !
You don't hear anything "better" using a Speakon jack. Cable is cable, no matter what jack you use or how much power you're pushing. Get it straight, fool.
The octaver is a pointless gimmick that has no value.
Sweetwater, and Ashdown... This demo sucks.
Dont talk so much!, you kill your own product, rather love to hear it in action.