Fully MODIFIED BWS 125cc Malossi BIG BORE KIT and 22mm Carb [Part 2]

#urbanriders #scootertuning #malossi #yamahabws #beewizz #2stroke
In this second part of this Yamaha Bee Wizz build we fit the Malossi 125cc Big Bore Kit, Malossi 22mm Delorrtto Carb and Malossi VL14 Reed Valve
Parts List:
Malossi Big Bore Kit urbanriders.odoo.com/shop/311...
Malossi 22mm Carb urbanriders.odoo.com/shop/161...
VL14 Reed Valve urbanriders.odoo.com/shop/271...
Everything Malossi Build: • Everything Malossi - Y...
125cc Big Bore Kit: • Upgrading a Yamaha BWS...
Follow us:
Visit Our Website: urbanriders.odoo.com/
Instagram: / urban_riders
Facebook: / a4mdistributors
TikTok: / urban_riders
If you would like to directly support the channel:
Patreon: patreon.com/UrbanRiders
Timestamps
00:00 Intro
00:20 Unboxing
03:27 Removing Old Parts
04:29 Malossi Piston and Barrel
05:47 Shroud Modification
06:30 Spark Plug and Cap
06:48 22mm Carb Setup
07:51 Air box Modification
09:18 First Start
10:05 Test Ride
13:12 Outro

[@jannetranberg7186]

In my youth, i had a suzuki s1, with 90 cc modified sylinder, 28 mm mikuni carburator, with 125 cc exhaust pipe and 125 cc ignition system. What an fantastic moped. it was with a 4 speed gear box, and it picked up nose to third gear and at third, it goes over 100kph..... i miss my youth.... and that suszuki.... and my dog from that period. Shit, now im in tears. An old fuck, typing in youtube.

[@Liam_EngelbrechtR7]

This made me want to buy one of these 🤩

[@urban_riders]

Buy one 👀🔥

[@AdrianA4M]

Do it!! 😁

[@JuanOrdaz-dg7qn]

greetings from Mexico what inspiration to continue with my project 👌

[@urban_riders]

That’s awesome! We love hearing you guys building up your scoots! 🇲🇽

[@geezyfps]

now that's what you call a fun scoot!

[@urban_riders]

Soon to be on a race track too 👀

[@mattiamarcazzan9601]

I have a 21mm carb on a 70cc 2 stroke

[@imootep4461]

you need at least 30mm

[@Third_eyee]

Found a Zuma with a 70cc big bore kit , clean as hell with only 3k miles but ofc it sells when I go to message the lady :/

[@DamnnSonnn]

I need to fix my Zuma 50cc and maybe put a 70cc malossi kit on it. That would be awesome

[@AdrianA4M]

Do it!! @@DamnnSonnn 😁

[@Third_eyee]

@@DamnnSonnn i ended up getting it, its the cleanest zuma i have seen in person

[@DamnnSonnn]

Very good 🔥

[@herculestuner]

I have a Yamaha Aerox 100 with the same engine and the same Malossi setup but it doesn't run perfectly yet

[@AdrianA4M]

What are you battling with @herculestuner ? What's it doing that you want to sort out?

[@herculestuner]

@@AdrianA4M I still have to find the right main jet for the carburettor

[@exgtt2061]

Great result 👍 if possible, try get the 125cc Piaggio motor with the infamous 172 kit. Torque galore AC/LC doesn’t matter. Piaggio even fitted a great pipe as standard 👌 respect to your build, keep an eye on temps with that motor

[@urban_riders]

That would be awesome! We almost bought a Gilera Typhoon 125 to do that exact build but unfortunately it fell through. I hope to get one soon! We do own a Runner 180 and the Italjet 180 that will be in future builds.

[@Jack-ct7gg]

I don’t know about cutting the air shroud. I would think it could affect the cooling in a negative way as it isn’t cooled by the air you get from driving it gets cooled by the motors rotor. But really don’t know love the videos still🔥

[@urban_riders]

Yes, that’s correct. The cylinder is cooled by the motor. It is cooled by the fan on the exhaust side which pushes air across the cylinder head. We simply open up the other side to allow the air to run across the head easily. The bottom cooling fins get block by the plastic,especially when it’s touching. So removing that allows all the cooling fins to “exhaust” the air properly. I hope this makes sense! We should make a more in-depth video explaining this in the future 👌🏼

[@mountaindew207]

Nice build. Is it just me or are these scooters the most fun? I have a Dt 175 and a Bmw f650, but the BWS is just superior, especially fun

[@alrickbrandt1151]

Yor super nice sound

[@pierredewet9156]

Do you guys have a workshop, i am in yzerfontein

[@urban_riders]

We are in the process of moving to a new workshop and should be settled by the end of May 2024.
Drop us an email if you require anything or for updates on the move.

[@rustygoldamsterdam]

Never seen a choke like that, can you tell me where I can get one?

[@urban_riders]

This one comes with the carb kit for the 22mm, but have a look on the Malossi website for something that might work for you.

[@11sjv]

how quick do you think it will be

[@DamnnSonnn]

I saw one do 130km with 125cc

[@11sjv]

@@DamnnSonnn 70cc does 120