Thanks, replaced fuel tank straps and noticed a ground wire on one of them but was not connected to anything, looks like it goes to the fuel filter. Just got done replacing all the differential bearings, fuel filter is next!
@@lilrider100 Ok, just wondered if you had any pointers or advice. I think I will replace it with nylon fuel line and zip tye it to the original fuel line starting at the fuel rail at the engine to a point somewhere under the drivers seat...then I will use a compression fitting to attach the nylon fuel line to the original steel line running back to the fuel tank from there... Sound feasible?
@@lilrider100 I just made a video of the rusted fuel line in the engine compartment of my 2006 Jeep Liberty Renegade 4x4. I will post another as/when I fix it 😎
06 just has the strainer on the pump and the pump is 221+.. 03 is just sender and it's 150+ and 35+ for filter; parts houses don'tcarry the filter. Both 3.7 tanks I've done Drop the tank it takes 1/4 the time, and epoxy that lid if you do it the way in the video; pump gasket doesn't stop all venting
Finally, something sort of easy to get to on this thing, lol.
Thanks for this vid it helps me out alot
gracias pense que era mas difícil de cambiar :)
OMG.....MOPAR 4 EVER.
Thanks, replaced fuel tank straps and noticed a ground wire on one of them but was not connected to anything, looks like it goes to the fuel filter. Just got done replacing all the differential bearings, fuel filter is next!
new ground wire comes with new filter
Firsties🎉 Nooice! 😎 STOC. Good job! Yeah that looks like a PITA...now that I watched your video I hope I didn't jinx my fuel filter 😂
Thanks.
Have you ever replaced the steel fuel line from the engine to the tank? Mine just rusted out perfectly to spray on my exhaust manifold 😢
No I have not
@@lilrider100 Ok, just wondered if you had any pointers or advice. I think I will replace it with nylon fuel line and zip tye it to the original fuel line starting at the fuel rail at the engine to a point somewhere under the drivers seat...then I will use a compression fitting to attach the nylon fuel line to the original steel line running back to the fuel tank from there... Sound feasible?
@@lilrider100 I just made a video of the rusted fuel line in the engine compartment of my 2006 Jeep Liberty Renegade 4x4. I will post another as/when I fix it 😎
Not sure your year but the 2005 Liberty fuel filter is in the tank attached to the pump. This jeep must be an 2002-2004 maybe?
06 just has the strainer on the pump and the pump is 221+.. 03 is just sender and it's 150+ and 35+ for filter; parts houses don'tcarry the filter. Both 3.7 tanks I've done
Drop the tank it takes 1/4 the time, and epoxy that lid if you do it the way in the video; pump gasket doesn't stop all venting
@@AbcXyz-rn2lz i dropped my tank. this made installing the lock ring 100 times easier