How to Install Fuel Pump E7218M in a 2007 - 2014 Jeep Patriot, Jeep Compass, Dodge Caliber

Sdílet
Vložit
  • čas přidán 24. 02. 2015
  • Application:
    E7218M
    DODGE CALIBER 07-08 L4-2.4L
    JEEP COMPASS 07-14 L4-2.4L
    JEEP PATRIOT 07-14 L4-2.4L
    This video is about how to install an E7218M fuel pump in a 2007 - 2014 Jeep Patriot. Airtex is committed to providing the most up-to-date, in-depth fuel pump replacement information that professional technicians need to diagnose, repair and install today's complex fuel delivery systems. Airtex is the only U.S. automotive aftermarket manufacturer that designs and builds electrical AND mechanical fuel delivery system components, including modular reservoir assemblies, electric fuel pumps, mechanical fuel pumps and in-tank sender and hanger assemblies, for a full range of car, truck, fleet and specialty vehicles.
  • Auta a dopravní prostředky

Komentáře • 70

  • @virzantillweed
    @virzantillweed Před 22 dny

    I was pleased to see that removing the fuel tank is not required for the 2014 Patriot. Previous vehicles have required removal. I'm not very mechanical but even I could perform this repair. Thank you.

  • @felipecardoza9967
    @felipecardoza9967 Před 2 lety +16

    If I may add to the gentleman's video ( it worked great for me, btw)
    1. You'll need a T55 Torxbit for the seat bolts- same size as for seat belt anchors. Stanley has a set you can get that works with your 3/8 ratchet. Just press firmly against the bolt to loosen, to avoid stripping the bolt head. My bolts, btw, were in front of the seat.
    2. Your fuel pump lock ring may look different. Works the same, though.
    3. My wife's 2014 Patriot did not have a lower hose attached. It wasn't loose in the tank either, I checked.
    4. The blue plastic part that locks the fuel line to the top of the pump is essential so if you are going to reuse the old one VERY CAREFULLY remove it from the old pump. It is a tiny piece of plastic, after all, but if you crack it your fuel line WILL come off and you'll have an enormous fire hazard.
    Anyway, it is a very easy job to do.

  • @mrrochefort26
    @mrrochefort26 Před 8 lety +4

    Had the tank dropped before i watched this.... thanks for all the help man!

  • @pressm4n
    @pressm4n Před 6 lety

    awesome guide, thank you...

  • @sabu1297
    @sabu1297 Před 5 lety

    very helpful thank you :)

    • @AirtexFuelPumps
      @AirtexFuelPumps  Před 5 lety

      Thank you for the compliment. It is nice to know the video was helpful.

  • @dieuseuljoseph8912
    @dieuseuljoseph8912 Před 2 lety

    Merci pour les infos

  • @Irrelevantskill
    @Irrelevantskill Před 4 lety +1

    anyway if you know if the 2017 renegades are the same thing?

  • @yousefsenderi7683
    @yousefsenderi7683 Před 7 lety

    greeat.thank you.

  • @kevinstoyable
    @kevinstoyable Před 8 lety +2

    Does a 2013 Jeep Compass have two fuel pumps? one primary and a secondary pump.

  • @michaelspence2382
    @michaelspence2382 Před 7 lety +1

    Will this work still on my 07 caliber it's a 2.0 ?

  • @randyshoyemi6857
    @randyshoyemi6857 Před 4 lety

    Does this apply to jeep Cherokee CRD DIESEL 2012 as well ?

  • @andyfam5613
    @andyfam5613 Před 2 lety

    Is the smaller one on the passenger side a fuel pump as well?

  • @jeorgerogers4729
    @jeorgerogers4729 Před 3 lety

    In my 2.0 l engine would this still apply

  • @mohammedalabooda1200
    @mohammedalabooda1200 Před 4 měsíci

    Good job.. what that hose in the tank ? When i disconnected the hose that device playing in tank .. can you make a video about the tank and the what inside it

  • @drkewan
    @drkewan Před 8 měsíci

    Hello .. thank for the video .. in doge nitro 2007 the fuel pump located under the rear seats too? Or not?

  • @MogoAE
    @MogoAE Před 8 lety +3

    Where is the fuel pressure port located on the jeep patriot? Thank you for your awesome video!

    • @adonishamad7972
      @adonishamad7972 Před 4 lety

      Incase anyone is still looking for it, there isn't a Schrader valve on the patriot. You'll have to tap into fuel line. Take off the engine cover and you should see a line feeding directly into the fuel rail on the engine. It connects using a green/black plastic latch. You'll have to get a pressure kit that is compatible with this system. Most auto parts stores will loan you pressure tester kits, make sure to get one with a lot of connector options.

  • @accordingtoabe2211
    @accordingtoabe2211 Před 10 měsíci

    will that part number work for an SRT4 turbo 2.4L caliber?

  • @azashukri5322
    @azashukri5322 Před 9 lety +3

    Hi, thank you for this great video. Can you please elaborate on the very last step? is bleeding the pressure after installation necessary? I've read in the service manual that you need the scan tool to pressurize the system, is that necessary as well?

    • @azashukri5322
      @azashukri5322 Před 9 lety

      ***** Thank you very much. Just finished the replacement, following the steps in your video.

    • @StpEastSide101
      @StpEastSide101 Před 11 měsíci

      ​@@azashukri5322 Sam

  • @LITMOVIESCENES
    @LITMOVIESCENES Před 4 lety +7

    my guy did it without draining fuel and was fine...

  • @gsharpe84
    @gsharpe84 Před 2 lety +1

    I got as far as attaching the transfer line. My assembly won't seat, it's getting hung up on something somehow. This is frustrating as this is my 4th or 5th fuel pump I've installed in my lifetime working on vehicles.

  • @joevillasana7442
    @joevillasana7442 Před rokem +1

    I’m having a hard time installing the new fuel pump its not sitting flush so i cant put on the lock ring? Anybody? Thanks

  • @freeriderx2
    @freeriderx2 Před 6 lety

    I leave my car without battery 3 days. and now no show fuel level, and only show de compass in the panel... no light configuration, no permomance, no K/l ... what can I do ?
    regards

  • @bottlerocketbob6231
    @bottlerocketbob6231 Před 7 lety

    So how do you clean out your tank with this type of pump? Or is the opening big enough to get your hand inside and you just siphon out again?

  • @ajaynair4657
    @ajaynair4657 Před 5 lety

    can we bleed pressure of the system by removing the fuel pump relay and crank the vehicle? without using the pressure gauge system?

    • @AirtexFuelPumps
      @AirtexFuelPumps  Před 5 lety

      It will. The vehicle will start and burn the fuel off or it will dump the gas into the cylinders in effect flooding it since the engine isn't running. The gauge method is the cleanest.

  • @dieuseuljoseph8912
    @dieuseuljoseph8912 Před 2 lety

    Merci

  • @TheFightersspirit
    @TheFightersspirit Před 4 lety

    Dodge caliber for me...almost dropped the tank thanks man 😂

  • @michaelwayne1977
    @michaelwayne1977 Před 7 měsíci

    Different for 2016?

  • @DirtBandit
    @DirtBandit Před rokem

    You must have got that lock ring off before the video. I'm beating the crap out of it to get it loose and it won't budge. I'm just bending the freaking tabs.

  • @ThePrivateryan1323
    @ThePrivateryan1323 Před 8 lety

    what size are the retaining bolts for the back seat?

  • @lanceduvall8807
    @lanceduvall8807 Před 5 lety

    Can a fuel pump be weak but operating, i have a p0171 code and have went thru everything else.

    • @AirtexFuelPumps
      @AirtexFuelPumps  Před 5 lety

      A weak fuel pump may throw the P0171 code. Other common issues with a P0171 code are: dirty or defective mass air flow sensor, vacuum leaks, fuel injector issues; dirty or clogged, bad O2 sensor.
      If the pump is found to be weak; low pressure, you will need to do a voltage drop test. If the voltage to the pump is low it will not be able to perform to spec. Even a new pump will fail to perform.

  • @troyherriman
    @troyherriman Před 2 lety

    Jeep Patriot 2017, Can't save gas and where is ? Can save gas fuel pump ?

  • @lisawills6543
    @lisawills6543 Před 7 lety +1

    Is this the same for 2012 Jeep Compass?

    • @TTS-TP
      @TTS-TP Před 10 měsíci

      Pretty much

  • @malibuluv209
    @malibuluv209 Před 3 lety +1

    Could this be a fix to to the dash warning "gas cap open"

    • @felipecardoza9967
      @felipecardoza9967 Před 2 lety +1

      I see no one replied. The gas cap open is about the evap system, which is separate from the fuel delivery system. The evap light comes on when there is a vacuum leak in the system and if replacing the gas cap doesn't correct the problem, then you have to look all through the evap system to find the air leak. Good luck.

    • @PhxRomero
      @PhxRomero Před rokem

      @@felipecardoza9967 wrong… it turns out my check engine light was on and my fuel pump went out

  • @johnwhitney9961
    @johnwhitney9961 Před 2 lety +1

    We’re is the fuel filter located on the Jeep Compass 2008

    • @Jeromybergman
      @Jeromybergman Před 2 lety +1

      It's on the pump. It does not have a serviceable in-line filter like a 90s chevy pickup. I just cleaned and prepped mine about 10 min ago actually (so easy) and I'm going to throw in a new one just cause it's so easy and cheap at work (autozone) lol. Now as far as replacement for what I've read there are some issues on installation with the popular warranty option DFG1140. Some say it either doesnt fit or the armature on the level sensor doesn't work properly...so I'm going to put it to the test tomorrow and try and keep you posted.
      2010 Compass Sport 2.4 108xxx

  • @cxcretired3426
    @cxcretired3426 Před 4 lety +1

    Fuel pump wont seat all the way- not enough for me to put the lock ring back on top- is there a way to get the pump to seat into the tank?

    • @trebordeverter9641
      @trebordeverter9641 Před 3 lety +1

      I'm having the same issue...did you figure it out?

    • @user-nl6lv8bq5x
      @user-nl6lv8bq5x Před 2 lety +1

      did you figure this out,have same problem

    • @joevillasana7442
      @joevillasana7442 Před rokem

      Did any one figure this out??

    • @coled1273
      @coled1273 Před rokem

      Sorry for the delay all- I think I just got a hammer and a non-ferrous metal (copper pipe) found a rib and tried to tap it back into the locked position. It’s not easy& I had a really unpleasant time doing this whole thing. Good luck.

  • @james102377
    @james102377 Před 6 měsíci

    I just went through 2 Delphi pumps in a 2011 Compass in 4 months. First one lasted 3 months second exactly a 1. I'm pretty pissed off because of tow bills. Pumps just start sputtering and go out. Double checked running direct power and grounds once they were out before returning for the warranty. Damn China!

  • @aarontirado9227
    @aarontirado9227 Před 5 lety

    Do you the ohms for the fuel sending unit?

    • @AirtexFuelPumps
      @AirtexFuelPumps  Před 5 lety +1

      Ohms readings for the sender are: Full: 13.3, Empty 172.4 +/- 5.

    • @aarontirado9227
      @aarontirado9227 Před 5 lety

      @@AirtexFuelPumps i have a 4x4 and have 2 send unit, i'll check them right now it seems no one is working, aleays says empty, thanks!!!

    • @AirtexFuelPumps
      @AirtexFuelPumps  Před 5 lety

      @@aarontirado9227 If it always reads empty make sure you have proper voltage and ground for the sender.

  • @edwardb4723
    @edwardb4723 Před 2 lety +1

    What could happen if I don’t release the fuel pressure?

    • @justinludwig7307
      @justinludwig7307 Před rokem

      It would just blow pressure off at the line where he disconnected it

    • @HughhMungusss
      @HughhMungusss Před měsícem

      @@justinludwig7307there’s the comment I was looking for. Thanks bud

  • @liz10706
    @liz10706 Před 7 lety +2

    the pump is not sitting into position? ?

  • @Chasej-ne8be
    @Chasej-ne8be Před 6 lety

    What size bit Is that to remove seat

    • @MrMaddogdad
      @MrMaddogdad Před 6 lety

      Did this on a Caliber and it was a T-55 Torx

    • @alfonsomedina9041
      @alfonsomedina9041 Před 6 lety

      Chase Johnson where it’s the fuel filter for 2007 Jeep Patriot ?

  • @captainbass5482
    @captainbass5482 Před 7 lety

    where's the fuel filter

    • @adonishamad7972
      @adonishamad7972 Před 4 lety +3

      In case this helps anyone, the filter and pump are part of the same assembly on this vehicle. One unit.

    • @bigb63fsu
      @bigb63fsu Před rokem +1

      @@adonishamad7972 it’s 2023 and you just led me to the light with your answer!! Thank you very much 🙏

    • @leonardwitucke1
      @leonardwitucke1 Před 5 měsíci

      @@bigb63fsu Me too