How to Easily Install Bifold Doors
Vložit
- čas přidán 26. 07. 2024
- Show a step by step how to on installing bifold doors. Once the new doors are installed, I show how to properly adjust the doors. The last step, I discuss the proper placement of the knob.
This channel in part is funded by viewers like you. Please help me continue to creating videos by becoming a patron.
/ pawpawsworkshop
Donate via Paypal to help me purchase a new jointer. I've never had one.
www.paypal.me/pawpawsworkshop - Zábava
Thank you so much for this video! My door came completely off the track this morning, and I wanted to fix it myself. After struggling too long, I found your video. This was thorough, incredibly helpful, and you present in such an approachable way. Not only do I now know much more about bi-fold doors and how to install and align them, but I also feel like a total bad a** because I fixed mine. Thank you for your help!!
That’s awesome! I’m so glad that it helped you
OMG perfect shop teacher voice. Excellent video. Just purchased two heavy bi-fold wood and glass doors to separate living room and dining room. Thank you.
Thank you very much, I’m glad that this video helped you
I need to repair the right side of my bifold doors for my wash area. Your video really helps me. Thank you.
You're welcome!
Good job my friend thanks for the info 👍
You’re very welcome
Thank you for kindly taking the time to share your experience, Paw Paw.
You're welcome.
I found this video to figure out why my bifold doors wouldn't close all the way. Turns out I placed some of the door hinges on backward. Thanks for the great tip, Paw Paw!
Excellent!
Thank you for the great instructions, Paw Paw! The only thing that I would change is the placement of the knobs. It opens much easier by placing them in the middle of the second panel. (Towards where the door opens).
Thank you for watching. That is an excellent placement for the knobs
Brilliantly clear and concise, 🙏
Thank you
Needed a refresher course, thanks!
You’re welcome
Paw Paw u the man. You made it so easy Thank you
You are so welcome
Looks easy enough.
It not bad. You can do it.
I purchased a set of Bi-fold doors almost 10 years ago but have been to intimidated to install them, This video has given me the confidence to finally attempt the install. Fingers crossed. I've subscribed to your channel
Thank you very much. Best of success to you on the install.
It is a nice video with all essential details.
Thank you very much.
Great job Paw Paw! I was debating knob placement this video confirmed the best spot!
Glad it was helpful! Thank you very much.
I love the way you explained and demonstrated the door and its connecting pieces, very clear and concise.
Glad it was helpful!
Very well presented; video presentation actually showed all actions to complete the job. Thanks Paw Paw
You're very welcome!
thanks for the demonstration, very helpful
You're welcome and thank you very much for visiting my channel.
Thank you Paw Paw, very informative video and you saved me a bunch of money. Thanks!
You are so welcome! I'm glad that it helped you and saved you some money.
Thanks so much
You’re welcome
nice video
Thanks. I appreciate you visiting my channel
Thank you. So helpful.
You're welcome!
thank you!!! Very Helpful video.
Glad it was helpful! You're very welcome.
Excellent tutorial. Thank you.
You are welcome!
lots of verry usefull tips! thenks for this great help
Glad it was helpful!
Very good instructions sir
Thank you very much
best video ever helped me alot
Awesome. Thank you very much.
This was so helpful! Thank you! :D
You're so welcome!
Thx for sharing. Nice video sir
You're welcome and thank you.
Great video mate 👍👍
Thank you very much.
Good Video thxs for the tip paw paw!!
You're welcome
Thanks, very good video!
You’re welcome
Thanks :)
Thank you very much
On the top inside pivot bracket closest to the corner of the jam anyone happen to know the size of the screw that tightens it down?
I did a stupid thing and lost the screw and don't feel like paying $8 for another kit.
Nice job, Paw Paw. But if I may make a suggestion....
You seem to be making a common mistake with respect to the use of your drill/driver's transmission. It appears in your video that you have your tool's speed set to "2", when it should be set to "1" for most of this project.
When driving fasteners, you need power (torque), so your tool's transmission should be set to "1" when driving. When drilling (for example, holes for your door pulls), you need speed, so your tool's transmission should be set to "2" when drilling.
As I said, this is a common mistake, and it's primarily responsible for the tool chattering and the stripping of the heads of your fasteners (as your driver bit keeps trying to jump off the head).
Bottom line: You viewers need to remember - "1" is for power, "2" is for speed.
Thank you very much. You are correct. I am very guilty of not changing it to the correct setting.
@@PawPawsWorkShop Cheers, Mate.
Wow! You scour the internet for DIY videos - looking at drill settings! It must be a thrill a minute in your life
@@mattdowns1316 As I approach 70, I find that thrills don't come as easily as they did when I was ten foot tall and bulletproof, and so I take them where and when I can get them. That having been said, watching and commenting on this video did not constitute a "thrill" for me - although it did give me SOME satisfaction to think I might be helping persons less experienced than I to understand some basic rules for operating a drill-driver. In fact, I thought that helping people understand was the whole purpose of videos like this one. And since half a dozen viewers found my comment worthy of an up-vote in just one month, and it was appreciated by Paw Paw himself, I'm going to give myself a little pat on the back for having achieved a small victory in that regard.
I clearly have no idea how old or experienced YOU are, but I can gather from your caustic and moronic comments on this thread that you don't understand the difference between critiquing and criticizing, so here's another little pearl of wisdom for you, Grasshopper. The purpose of critiquing is to improve future performance, whereas the purpose of criticizing is, more often than not, to make yourself feel bigger by making someone else feel smaller. I would suggest to you that my comment on this thread was intended to achieve the former, while your comments seem to be intended to achieve the latter.
In the words of the late, great Dean Vernon Wormer, "Fat drunk and stupid is no way to go through life, son." But feel to down-vote my comments and continue along on your merry way, encouraging others to be as ignorant as yourself.
Bob Cusanelli you’ve got too much time on your hands! And I’m a joiner you dick!!
You need a hobby instead of typing war and peace, quoting people and calling people - you say you approaching 70 - yet need to grow up - arse
Can you use the other whole of the other whole broke
Typically no, if the hole is broken, fill the hole with another piece of wood and glue it in place. Once the glue has dried drill a new hole into the repaired spot. It will be just like new.
can the bracket be placed right at the edge? i think I've seen people doing that?
Yes, it should work fine. Test it and see how it works.
On the bottom bracket, is it not absolutely necessary to have the one screw going into the floor? Just wondering because I'd love to not have to drill through my laminate and underlayment if it's not absolutely necessary.
No, you do not need to drill a hole into your floor
We just purchased bi-fold closet doors and we went with the size that matched out measurements. How much can you trim off these doors because he trimmed 1/4 inch and it's still too tall?? Help!!
Gina Reynolds . Measure the height that you need taking in consideration the hardware roller and the pin at the bottom. Once you have the correct measurement, measure from the top and mark a line on the bottom of the door for your cut line. Take a square and using a utility knife score the cut line several times. Then with a circular saw you can cut the door. The scores line will help prevent the door from having a rough edge. If you have a block plane slightly bevel the cut. If not, then use sandpaper.
@@PawPawsWorkShop Hi thanks for replying. Well we have cut 3/4 of an inch off and it still won't fit. It measured 79 inches, we bought a door that was 80 & we have cut off 3/4 inch and it still won't fit. What in the world? Can we cut some off top too or just cut another 1/2 off bottom? Wish we could've hired an installer, lol
My door is 56"*80, how to norrow the opening to get the 48" bifold door to get fit in?
Thank you for your answer.
Wow, sounds like you will need to frame in the extra space. There is really not a good way to do it other than framing in the space to get you to the 48" spacing.
Thank you for your quick response. If I buy 2/30*80 and trim them to fit 56" open closet. Do you think that might be work?
Thank you.
A hollow core door only has approximately one inch of material around the outer edge. It will work but you will need to rebuild the doors.
So the ground screws aren't necessary? I have tile and was wondering if I have to make holes
No, the bracket screws into the wall and the bottom pin in the door sets in that bracket. You should not have to drill into the floor tile.
@@PawPawsWorkShop Thanks for the fast response!
You're welcome. Have a great day.
@@PawPawsWorkShop ..I have laminate over concrete..thank you!
I wanted to replace my closet bifold bottom pivot bracket. It looks similar to your old one. Do you know what they are called and whether they are still selling those? I don't want to get new door and the old one doesn't use predrilled hole and the ones on Amazon are the new kind that you have. It is a smooth pin that require bushing.
The bottom pivot bracket is very common. Any hardware store will carry them. They come in a little kit wi the bracket and the pivot pin that goes into the bottom of the door
@@PawPawsWorkShop My old door still have the pivot but it's the smooth kind and it's attached to the side of the door not drilled to the bottom. I just need a replacement for the bottom bracket and the bushing. Smooth kind. Not the jagged bottom one. I prefer to not have to drill new hole into the door if I don't have to.
Say , can I screw the lower bracket's into the concrete
Yes, you can do that.
When inserting the upper and lower guide pins, make sure it is on the same panel. Then the roller on the other panel on the top. Frustrating if not paying attention.
Excellent point, thanks for pointing that out to everyone.
If I want the door to be flush with the opening and not set back, how would I do that?
The door pivots on a point at the bottom and has a tract at the top. If you pull the track and the pivot bracket forward the distance required to make the door flush and you will have the door flush with the opening. Just measure with the door closed to see how much you need to bring the bracket before you start
@@PawPawsWorkShop thx!!
where does the spring go
It goes on the track between the doors.
What happens when you're painting wood toned doors and paint doesn't cover great? I sanded, primed with kilz, then painted. You can see a bit of discoloration, not much, but I see it.
size 18x80 or 24x80?
This one is 24x80, however, the process is the same.
Paw Paw’s WorkShop thanks 🙏🏿
Trying to fit one of these doors, with a screwdriver, zero upper body strength at 30 weeks pregnant its proving a little difficult 😂
WOW, I think I would get a little help. Please be careful
@@PawPawsWorkShop iv done it now Thanks to your video. The Instructions were terrible but your video helped. Thank you. X
You're welcome
The location of the doorknob might be a pinch point for the kids or really anybody.
Any bifold can pinch fingers very easily
I’m just gonna “GO AHEAD” and then we’re gonna “GO AHEAD” haha
If you need a video like this maybe you shouldn’t be attempting DIY!
DIY folks have to start somewhere. There is a first for everyone.