How to Install Delta® Hycroft™ Alcove Shower Walls
Vložit
- čas přidán 30. 05. 2024
- Mike and Hannah walk through how to install Delta® Hycroft™ Alcove Shower Walls. This installation is more advanced, so we recommend watching the full video before starting your installation. Or, contract a professional. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Drill
- Safety Glasses
- Caulk Gun
- Caulk
- Sealant
- Tape Measure
- Level
- Square
- Shims
- Drop Cloth
- Pencil
- Hole Saw
- Screws
- Extension Bit Holder
- Drill Bits
- Driver Bit
Steps:
0:00 Intro
2:14 Check Studs are Square & Level
3:30 Add Pieces of Bracing
5:57 Install Doornailers
8:51 Dry Fit Back Wall
9:30 Drill Pilot Holes
10:30 Dry Fit Panels
16:27 Secure Back Wall & Panels
23:24 Install Brace
24:12 Apply Sealant - Jak na to + styl
In a perfect world.
Make sure you check that everything is plumb and level- but we have no idea what to do if its not…
I’ve installed a few of these and I’d recommend. Very easy to install and nice. Make sure to use the best silicone you can buy.
as a contractor and watching this video i thought it was pretty good install instructions for the homeowner.. However, after watching this video and how the unit installs i will stay with the current brand i have been installing. I feel the current brand i install interlocks with no need for adhesive. and much less complicated install.. The unit i install has interlocks which make the finished unit very solid and leak proof.. I do use Delta faucets almost all of my projects...
What brand do you use…I need to install a three and my back wall is on a exterior wall. So I can’t really do the adhesive cuz I will have to use install a vapor barrier between framing and shower unit
@@orryrogers5348 I use Sterling Ensemble line of bath and showers. They have a couple different looks. My preference is the Curve. The back and sides have protrusions that fit into indents in the base. We always install the base in Mortar being careful to level it and fasten to the studs with brackets and screws. The back and sides also interlock with each other and are fasten with screws to the studs across the top and down the outer edges under the drywall. I just finished an install Friday and start a new remodel Monday with another Sterling Enselble. Division of Kohler
Well thought out video, Delta; Mike & Hannah are good presenters. The step-by-step approach and tips are good. The door nailer explanation was helpful. Gives me confidence for my installation.
We're so happy to hear this, RL. Having confidence in your Delta product installation gives you peace of mind for years to come. Please let us know if you ever have any questions!
It's almost like you guys knew that I was getting ready to install this set. Excellent instructional video. Thank you!
hope nobody forgets to take the painters tape off at the end
I swear that's Philippa Soo from Hamilton! Work must have been hard to get after such a minor role! 😂
Good video! Also makes a great drinking game. Just take a drink every time they say “perfect”. You’ll get hammered!
😂😂😂
They had to say "perfect" to distract from the fact that the bubble was way off! No information what to do if your walls or panels were not plumb or level. 🤔
Thanks for the door nailer tip.
what is a door nailer?
Very good job
Excelent video, that's I need to know. Thank you. Good explication.
We're so glad you found it helpful, Lorenzo!
I purchased one of these and was very disappointed when I opened it. The channel between the back panel and the side panel do not even overlap at the bottom. Why would it be designed this way? It completely relies on caulk which is known to fail. I am hoping I can return this unit.
hello, I'm installing this exact unit. do you happen to know what caulk/brand type was used in the video? thanks
HOw about another series for old work / rennovation? I'm in a high rise with metal studs on 30 to 48" centers (yes you read that right) I've been figuring on adding bracing and greenboard to adhere the panels.
Thank you (awesome)
We're so glad you found the video helpful!
I just installed my Delta Tub surround on my new Delta 400 tub. My question is this,... how long should I leave the braces up before removing them. Thanks for your guidance. It went just as easy as you made it look.
Hello Jerry. Thank you for reaching out to Delta Faucet Company and we are happy to help. We are sorry to hear that this information was not readily available to you. You will want to leave the braces up overnight and then they may be removed. With any further questions or concerns, please do not hesitate to reach out to us again. Thank you. -Carrie
do you put adhesive on the door nailer or not .? would there be any reason to NOT do this ?
Is this the same type of install for the tub as well? The tub video says look for that video and i cant find one.
I purchased that exact product. However the the shower pipe comes out right on that upper ridge. Therefore I have to extend the pipe up 6 or 7 inches or return the product.
I don't like this at all. First, why Delta would make a shower wall system that doesn't interlock in the corners and requires sealant that will eventually fail? Then the sealant he ran on top of the floor pan before installing the wall doesn't even touch the wall. In fact, it doesn't even appear to be necessary as water won't be able to run down the wall and then under the bottom of the wall and up and over the flange on the floor pan. I was looking at this model of shower and watched this video to see how it's built as the website didn't show much detail. I have seen enough to decide against this model.
Great video. Question: If you're installing your surround shower on an exterior wall, would you insulate the walls? If so, how would you use adhesive to bond the walls?
Hello Mark. Thank you for contacting Delta Faucet Company. We recommend installing greenwall for our shower surrounds and using silicone based adhesive. With any further questions or concerns, please do not hesitate to reach out to us again in a private message. -Carrie
Great video! Explained the door nailers much better than the written instructions.
I just finished the insert install and need to install drywall over the flanges of the smaller side walls. What would you recommend to keep the integrity of the water tight seal on these flanges? Would stainless wood screws be ok?
Hello NSlinkar,
Thank you for your question. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help!
We recommend predrilling holes in the flange and using stainless steel screws or galvanized nails.
Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer.
Best regards,
Bryan
what kind of sealant is supposed to be used? I believe my plumber neglected this last step, we have water leaking from the bottom of our wall.
Okay wish me luck I'm putting in my Delta classic 400 pan and my walls over the next two days. I have the Delta valve for hot water and also have the r10000 for a shower diverter to do two shower heads I'm using PEX A the whole time then Simplicity Delta shower door as well.. I'm nervous actually
Amazing! Please reach out to us if you have any questions. We're always here to help. ❤️
good video but IDK why anyone would not go with tile on new construction, or a remodel,. cute bibs
I’m putting over a different brand tub. Hope it’s not an issue. Also what size hole saw it wasn’t mentioned. Thanks
Hello customer. Thank you for contacting Delta Faucet Company and we are happy to help. We do not recommend installing our bath tubs over previous installations. We also are not sure what hole size you are asking about. Please send us a private message with your contact information for further assistance. -Carrie
@@deltafaucet it’s just the tub surround I’m installing. Over a brand new tub( not delta) the hole I’m referring to is got the water mixer . Not sure how to private message .
thanks
Cómo se llama ese tipo de tina o del bañera
You guys dont use any glue between the seams….do these panels have interlocking panels? That’s what i want to see
...about the door nailer "...stay on top of what?" what's the measurement from the end of the shower base? I got the 1-1/2" above, but not sure of the placement in reference to the end of the shower base!
Hi David, Thank you for your question! The position of the door nailer will depend on the model of shower walls. See the installation instructions for the door nailer placement.
media.deltafaucet.com/MandI/104216%20Rev%20A.pdf
What if I have a waterproof backing (like what is usually used with a tiled bathroom). Do I need to remove that backing to expose the studs, or can this product be installed on top of the waterproof backing as well? What is the recommendation? Should or shouldn't the waterproof backing be removed?
What did you end up doing? I have the same situation.
@@user-.223 what did you end up doing?
I went decide not to use this brand. I went with a local distributor that the shower is ready for install without mortar base or the backing. I sealed the top and side with real good clear adhesive. And it works great.
I have the same issue and it seems that Delta either didn't see this or doesn't have the answer. I'm disappointed.
I was hoping they would have mentioned the type of sealant used. 100% silicone?
Hello Joseph,
Thank you for your question. We apologize that this information was not readily available to you and are happy to help. We recommend the following adhesive and sealants:
- DAP® 3.0™ Kitchen, Bath & Plumbing High-Performance Sealant
- LOCTITE® PL Heavy Duty Sealant
- Red Devil® RD3000™ Advanced Kitchen & Bath Sealant
- ECO-BOND® Kitchen-Bath-Plumbing Adhesive and Sealant
You can find out more here: media.deltafaucet.com/SealantandAcrylicCareGuide/91201%20Rev%20B.pdf -Carrie
Can you install this wall with the delta bath tub?
Hello JOHNG TV1, Thank you for your question! We are happy to help you. The Delta Faucet HYCROFT ProCrylic 60 In. X 32 In. Bathtub Surround MODEL# B66513-6032-WH can be installed with a Delta Faucet bathtub. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. -Kelley
The fire retardant pad that was installed where the mixing valve goes. Does this come with the wall set? Mine did not come with one and nobody in the hardware store knows what I’m talking about.
I am installing this kit today. The fire retardent pad comes in the kit, in with the instruction sheet.
I installed the walls but did not install a door nailer. Can I still put sliding glass shower doors in
Hello Zachery, Thank you for your questions about the Delta® Hycroft™ Alcove Tub Walls. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help!
The shower door installation manual will show the stud placement needed. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any additional questions. Thank you for being a loyal Delta Faucet customer.
-Bryan
looks like a reply , but no answer
Apparently Delta cant read. Pretty sure you said you “installed walls” and Delta replies with stud location manual. 🤣🤣🤣
Do you put caulking at the bottom of the panel
Hello Ernesto, Thank you for your question about the Delta Faucet product. Please accept our sincere apology for the inconvenience you are experiencing, we are more than happy to assist. We do recommend applying the sealant to the bottom of the panels. Thank you for being a loyal Delta Faucet Company customer. We look forward to continuing to serve you. Please contact us back with any further questions or concerns. -Kelley
What brand of adhesive is recommended?
Hello Rick,
Thank you for your question. We apologize that this information was not readily available to you and are happy to help. We recommend the following adhesive and sealants:
- DAP® 3.0™ Kitchen, Bath & Plumbing High-Performance Sealant
- LOCTITE® PL Heavy Duty Sealant
- Red Devil® RD3000™ Advanced Kitchen & Bath Sealant
- ECO-BOND® Kitchen-Bath-Plumbing Adhesive and Sealant
You can find out more here:
media.deltafaucet.com/SealantandAcrylicCareGuide/91201%20Rev%20B.pdf -Kelley
@@deltafaucet Thank you! And yes, I actually do have the card that came with the shower walls. Silly me! I should have looked closer. Cheers.
@@deltafaucet Why are 4 adhesives listed when the job only calls for 2? Are they just different options?
My unit did not come with installation instructions. Can they be found on line?
Hello Marcus. Thank you for contacting Delta Faucet Company and we are happy to help. Our installation instructions can be found on our website under the model number of your product. With any further questions or concerns, please do not hesitate to reach out to us again. -Carrie
Is it possible to order units directly from Delta?
Hello Nikki. Thank you for reaching out to Delta Faucet Company. Currently, it is not an option to order directly from Delta Faucet. We recommend going to your local hardware store. Please refer to the link below:
www.deltafaucet.com/where-to-buy
With any further questions or concerns, please do not hesitate to reach out to us directly. -Carrie
@@deltafaucet .. So these panels don't have to be snapped in place on sides?
I wish you would have showed the front view of the mixer , instead of only the side view . other than that it was a helpful video
What adhesive to use ?
Hello Customer. Thank you for your question and we are happy to help. For sealant, adhesives, and caulk, we recommend DAP 3.0, or Loctite PL Heavy Duty Sealant. If these can't be found, use latex/acrylic high-performance sealants and caulks that are designed for plastic/polystyrene, and do NOT use water cleanup. Other types have the potential for poor adhesion, shrink, and cracking over time.
For adhesives, any construction adhesive that is safe for plastics can be used, please follow the manufactures instructions for application and cure times.
With any further questions or concerns, please do not hesitate to reach out to us directly.
Best Regards,
Carrie
What in the world do you do for exterior walls??!
Hello Antonio. Thank you for contacting Delta Faucet Company and we are happy to help. Please send us a private message with your contact information for further assistance. -Carrie
Are you guys expecting the walls to move soon? ?
So there's never a discussion about a vapor barrier & adhesive when putting up walls
0:36 building codes don't matter if u don't tell the government
If Dean Cain and Jim Caviezel had a child it would be that guy
Where can I get the fire retardant patch? 😊
I am installing this kit today. The fire retardant pad comes in the kit, in with the instruction sheet.
I.meant Hannah needs a pro tip to change her drain tip, gasket on bottom. Always, if your representing Delta Hycroft your misleading people
Good job but in my opinion a overkill installed dozens nobody's in there for track and fieled 🤣
This surround is garbage. Nothing lines up. The back wall is 59.5” and the sides are 59.75🤣🙄 It’s hot garbage and I advise not to purchase it.
The referenced surround is for a tub…but same design.
I dont see anything that looks like my shower
This is a garbage tub surround. They expect you to silicone gaps big enough to slide your finger into. Flimsy, floppy garbage. Method for bracing the apron is a joke. I am a contractor and I know how to and have installed hundreds of tub units.
This is by far the worst one, and I put it in my own house, so I get to hate this for many years to come! What will they think of next to push cheaper garbage on us?
1980s hiring video doesnt help anyone
neither of them has ever installed a shower. 🤪