Most Don't Know DeWalt Drill Tool: Drywall Screw Setter

This is the Dewalt DW2014C4 Drywall Screw Setter. This Dewalt drywall screw setter is from the Dewalt drywall tools line of driver bits. The engineers at DeWalt tools finally designed a must have tool for drywall screws. The DW2014C4 Dewalt drywall bit accessory helps you drive the screw into the drywall at the perfect depth, without over driving it and causing the drywall paper to tear. this is one of the most clever DeWalt driver bits they have produced. We have links to the Dewalt DW2014 beeow. This is one of the required must have tools for your DeWalt Drill. These deWalt drill accessories should be in your bag to augment your drywall screw gun. This video is a great demonstation of the drywall screw gun vs drill, where we show our Senco screw gun in action. This Senco drywall screw gun performed well, and so did the Dewalt DW2014C4 Drywall Screw Setter.
Tools and products mentioned in this drywall drill video:
Dewalt DW2014C4 Drywall Screw Setter (4-Pack): amzn.to/2YC6Yhi
SKIL Power Screwdriver With Cutter Attachment amzn.to/30uBOub
DEWALT DCK299D1T1 Hammer Drill, Impact Driver Kit: amzn.to/2M6h450
SENCO Duraspin drywall screw gun DS212 18 V cordless amzn.to/2WffAgu
Senco Duraspin 1-5/8" Drywall Wood Collated Screw (1, 000 ct) amzn.to/2HpQC5C
Senco 06B125P 6 1-1/4-Inch Drywall Screw-Light Steel amzn.to/2HrahSY
This Dewalt drywall screwdriver bit is the perfect drywall screw drill bit to help you screw in
drywall screws to the correct textbook drywall screw depth every time. You can see here we compared this drywall screw setter drill bit accessory to the senco drywall gun with amazing results.

[@jeffostroff]

Tools and products mentioned in this drywall drill video:

[@MikeJones__Who]

Those 2 drywall screws you used the Senco gun on look over driven as hell lol

[@ralph5450]

Don't want to be nit picky but it's not the clutch that makes it work. The beauty of it is you can use any drill. Thanks for showing people about it.👍

[@aceman3223]

Me sitting here stressed out and about to screw in drywall for the first time - was worried about demolishing the drywall paper but after seeing this I will be grabbing this screw setter for sure. Thanks a lot for sharing this!

[@FredFlintstone21]

I was so riveted (screwed) into what you were saying that I almost forgot to leave a thumbs up! Cool plastic cutter too!👍👍😎😎

[@505_chill_official]

Jeff, awesome comparison with the drywall gun, the drill, and impact driver, especially with a 4k cam, thank you. I am totally buying a DeWalt drywall adapter, they looked perfectly set with both the impact driver and drill.

[@yaz5365]

Love it. Getting one tomorrow

[@guillermom.g155]

Greetings from Costa Rica, very usefull, Thanks.

[@juliodolmus5720]

Awesome. I got this in my tool kit I got off amazon and was wondering what it was for. Thanks for the video

[@bmw325ia]

Have the bit but didn’t know the proper usage, now I do, thanks

[@carlhenderson7254]

Love them with the sleeve...

[@brandonw4800]

Definitely worth it if you can’t afford a drywall screw gun. Good diy repair persons bit

[@whatusername1234]

Try using them with a screwdriver or a drill with mechanical clutch. Use low speed and experiment with the torque setting. Also keep the dimpler bits protected from getting damaged by coming in contact with other tools/metals so that they won't form sharp edges that may damage the paper. Try using something like the dcf601 12v screw driver with these.

[@victoriajones410]

Your shirt is pretty cool. Thanks for the info.

[@dscordobab]

Hi Jeff. Thank you for the tip. I just bought it at Amazon. I hope you get your commission. Cheers.

[@yoyoitsKerry]

Good video! I'm pretty sure I have some of these. Didn't know what they were for!

[@JVH9001]

I'm pretty sure the "clutch" action in your video was the Philips driver bit "camming out" of the screw (Philips is designed to do that). The buzz was probably the driver skipping over the screw. It doesn't rely on the drill clutch if you have your drill in the highest torque setting as your DeWalt in the video. Maybe on the lower torque settings it would use the clutch.

[@maagu4779]

Clutch setting is the key! The idea is ok, for small jobs. But really most jobs are not that small. Especially when hanging ceilings. The longer you spend the more on your back!

[@milwaukee_69]

I use a drywall attachment from Montana that can be used on a drill and impact driver and does the same thing as the dewalt bits.

[@guillermom.g155]

The most of people in Costa Rica they use the mesh tape instead of paper tape for the joints, but i´m sure is better the paper tape according to what i´ve learned.