There's nothing more annoying than having to hand-screw something together czcams.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
*Great lightweight screwdriver **MyBest.Tools** and the light definitely came in handy when securing our ceiling diffuser. Battery was still charged for over a month.*
Ive had the dewalt for a while everyone told me about it jamming up like mad before i bought it but it never has i must have gone through 50 boxes of screws and ive not even broken a bit got it for under £200 as well absolutely love it
need your help, i have the 2866 Milwaukee gun but the magnetic bit holder is not a quick release as you showed in the nicely done video, is there a different part number or is it the 2020 release tool?
Hi, I have a link to the gun used in the video. Produce code is M18FSGC-0. www.tradetools.com/milwaukee-m18-18v-fuel-brushless-cordless-collated-screw-gun-m18fsgc-0
Only hikoki is able to screw it into internal corners, or tight places, with others collated screw guns, it's just in possible. I've got a makita, and AEG collated screw guns, and they just aren't able to do the job. Makita is not going to work even on the reces joints, the head is jamming screws, The aeg is a bit better on the reces joints, and it's cheaper.
My Dewalt jams as much as it works properly, sometimes makes u wanna throw it to to trash...but I have the Dewalt battery platform so it makes sense as the battery can go thru 258-300screws and virtually no battery consumption for a whole day .... pros...when it works right its a must have..cons when it half screws or jams its like pulling the rip cord on a lawn mower that won't start.
Get the new model dewalt it is the best one . Trust me I’ve done drywall for over 20 years . I’ve heard people say the new model hilti is shit but I haven’t tried it.
Andzejs Stasko I am a Bosch guy so I did some digging and Bosch recently got a new CEO and he did some restructuring because compared to the brands above Bosch makes probably 4-5xs as many products except for hitachi/Metabo, their ceo says they are going to put out less of a variety of products but will focus on making the ones they do make top of their class. Gotta day I recently bought their new smaller Cordless screwdriver that charges via usb cable and it operates easily and it’s powerful as hell, only thing better I’ve used was Makita but Makita was 2Xs the price and too big and heavy, might as well use a drill
You guys do realize the start of the video was a bit, he was joking around for laughs lol Wow what a bunch of crybaby idiots in the comments, if you actually watch the whole video he pretty much nails the information on these guns. And guess what they're all pretty much the exact same, kinda comes down to which color you prefer and possibly the weight although even the weight of these are damn near all the same.
There's nothing more annoying than having to hand-screw something together czcams.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
This was informative but would be nice if you actually used them and reviewed their performance
*Great lightweight screwdriver **MyBest.Tools** and the light definitely came in handy when securing our ceiling diffuser. Battery was still charged for over a month.*
The bit changing helped heaps. I couldn’t get mine out of the Milwaukee until your vid.
Very surprised the Hilti sd4500 isn’t in this video it is superior to any of those guns especially in light gauge metal framing
Ive had the dewalt for a while everyone told me about it jamming up like mad before i bought it but it never has i must have gone through 50 boxes of screws and ive not even broken a bit got it for under £200 as well absolutely love it
instablaster...
Decent gun but not that attachment. A tip for any belt /auto fed gun attachment is graphite powder no wet lubes.
@@patnaples5019 I’ve known a few lads ruin theirs with wd40 seemed like a no brainer to me but it’s clearly not as obvious as you’d think
Lucky. My dewalt only works right when it's perfectly straight it's trash. Jams too
How big of screws can you put on there? Want to use for deck screws
need your help, i have the 2866 Milwaukee gun but the magnetic bit holder is not a quick release as you showed in the nicely done video, is there a different part number or is it the 2020 release tool?
Hi, I have a link to the gun used in the video. Produce code is M18FSGC-0. www.tradetools.com/milwaukee-m18-18v-fuel-brushless-cordless-collated-screw-gun-m18fsgc-0
Dude hilarious! Do a demo of all of them... let us see how well they work and give feedback on each one.
Only hikoki is able to screw it into internal corners, or tight places, with others collated screw guns, it's just in possible. I've got a makita, and AEG collated screw guns, and they just aren't able to do the job. Makita is not going to work even on the reces joints, the head is jamming screws, The aeg is a bit better on the reces joints, and it's cheaper.
Is there any gun that can handle 3" long deck screws?
Can it load deck screw cartridges?
Where did you find the dewalt kit like that. Can only find it sold separately
www.tradetools.com/dewalt-18v-brushless-collated-screw-gun-skin-dcf620kn-xe
My Dewalt jams as much as it works properly, sometimes makes u wanna throw it to to trash...but I have the Dewalt battery platform so it makes sense as the battery can go thru 258-300screws and virtually no battery consumption for a whole day .... pros...when it works right its a must have..cons when it half screws or jams its like pulling the rip cord on a lawn mower that won't start.
Iv got the makita 18v collated screw gun but looking at getting the makita screw gun with the attachment .donyou guys think it’s worth while or not
E Murr hi did you buy the makita with the attachment? Just want to know your thought on it ? Thanks
Bradford need the Hilti up there u cheeky bugger!
The new flex gun tops all of them
And Bosch??
Do you use them which one did you like the best? A demo of the tools would have been better than the three min of outages in the intro.
Читай инструкции Вася. У Макиты есть опция авто включения когда надавливаешь на шуруп.
WUAQUUUUUUUU HITACHIIIII THE NUMBER ONEEEEEEE
So I’m a minute into this video and you just made me laugh out loud. Thanks I needed that. Oh yeah I subbed. I could use a laugh from time to time
So which is the one to buy.
Everyone is different, it depends on the individuals needs.
The first min was rough but the rest was pretty cool.
1:16 you're welcome
No demonstration??
Where web links to by drills
www.tradetools.com/cordless-tools/cordless-individual-tools-and-skins/cordless-screw-guns
Oi mate! Fn Legend 😅👌
festool????
forgot the Hili
HİLTİ İS THE BEST!
Get the new model dewalt it is the best one . Trust me I’ve done drywall for over 20 years . I’ve heard people say the new model hilti is shit but I haven’t tried it.
I have canceled this video before i spent my data with this comedian
where the fcuk is bosch???
Andzejs Stasko I am a Bosch guy so I did some digging and Bosch recently got a new CEO and he did some restructuring because compared to the brands above Bosch makes probably 4-5xs as many products except for hitachi/Metabo, their ceo says they are going to put out less of a variety of products but will focus on making the ones they do make top of their class. Gotta day I recently bought their new smaller Cordless screwdriver that charges via usb cable and it operates easily and it’s powerful as hell, only thing better I’ve used was Makita but Makita was 2Xs the price and too big and heavy, might as well use a drill
You guys do realize the start of the video was a bit, he was joking around for laughs lol
Wow what a bunch of crybaby idiots in the comments, if you actually watch the whole video he pretty much nails the information on these guns. And guess what they're all pretty much the exact same, kinda comes down to which color you prefer and possibly the weight although even the weight of these are damn near all the same.
"Roberts your fathers brother" ??? Help - I am American.
Aussie slang. Another way of saying, Bob's your uncle.
Where the fuck is the Hilti?
Makita the best
Hilti rules
Hurry up
there is one big difference between all these guns.... the color. Other than that they're all the same.
The intro alone is worth a thumbs up. Haters have no sense of humor.
Did not finish watching. over 1 minute of outtakes in a 6 minute video?
Why dont you actually review the guns. We ain't come here for a comedy show
HILTI
This was painful to watch the first bit of the video.
That’s what I’m saying
DEWALT
ALL JUNK ,,BY ONLY HILTI COLATED
He needs to learn to talk
i have makita and its rubbish , hilti is best
u are not funny but thanx fore the vedio
after 30 + seconds of coughing, joking, wasting time...I left (what a great way to start a technical tool review-not)
Someone needs to tell this guy He's not naturally funny. The comedy act didn't help.
Super annoying intro