Excellent work my man, you did however leave out one important detail in the video... The smile of the child whom you made it for! Perhaps you can put that into your next video. God Bless!
!!! Wow Work Manship Is Awesome ya Make it Look so easy thank you for Sharin Got any Plans for this wood Be great Kids toy and for outside as wind mill toys Ya Got this Thks again Keep up the Great work I,m Joining cause ya Make it Look Easy thks again
You are a very lucky man, because you do not take safety into account when working, you expose your hands a lot, it is not a good example for beginners. On the other hand, the model is very good.
You plane came out tight thank you for sharing. I just got a good info to inset the poles to hold up the top wing for the plane I didn't think of that to hold it better for out doors in the wind. 👍
@@benwynncreations4615 I learns something, I just started on a bi plane body today got the shape. Cut out all the parts wing's prop is what took most of the time, so when it's hung on the porch out side the propeller will spin in the wind. Tomorrow I will take my grinder with 80# grit and sand to the shape I need it to be. It got a rough cut today.
This is good but I cannot make them at home. So, can I get something like wooden tankers, trailer, and rescue ladder? The model should be uniquely assembled and the toys must look elegant.
Very nice! Very, ver nice! Would you happen to have some plans in order to make this plane? I am having a problem with proportions and I really like how yours looks. Any assistance you could lend would be greatly appreciated.
awesome delicate work with so rough tools. Congratulations. However, I wish you had paid a little more attention to the aerofoil sections' details as an old fart who once upon a time flew planes :)
TheSteelWolf you are right about the wings and shape this was a few years ago and have been working hard to get better and build up the tools I have I am going to start doing videos again but hopefully a better product this time
There is no green treated lumber in it, the body is made from 100 year old beams from a town hall and were untreated the wings are beach wood I cut and seasoned myself the engine parts are mahogany and the back fin it untreated pine as well as the Pistons landing gear nose cone and exhaust pipes
@@benwynncreations4615 my brother tried ripping a 2x4 the day I got my 12 inch mitre I couldn't tell him no before he tried. It exploded and nearly pulled his hand in. 6 years on he still doesn't like it.
Beautiful job :) ॐ
thank you
Amigo muy buen trabajo
Great job
Must be very costly
I think I sold them for £40 or £60 can’t remember but they each took 3 days
I wish I could work that fast.
me to
Nice job 👍
thank you
Nice work, this should make someone happy.
Amazing.. one of the best wooden toys I've ever seen.. Congratulations for your fine work !
Jose Antonio thank you
Muito legal parabéns!
Well done!! It looks great.
+Making SawDust thanks you
Excellent work my man, you did however leave out one important detail in the video... The smile of the child whom you made it for! Perhaps you can put that into your next video. God Bless!
Hey, that will be great, can't wait to see that smile on that kiddo dude!!!
God bless y'all!!!
you are awesome
One heck of a good job, well done.
Lester Christensen thank you
!!! Wow Work Manship Is Awesome ya Make it Look so easy thank you for Sharin Got any Plans for this wood Be great Kids toy and for outside as wind mill toys Ya Got this Thks again Keep up the Great work I,m Joining cause ya Make it Look Easy thks again
Thank you, I don’t have panes I just make it up as I go
Well done my friend!!!!!!!!!!!!!!!!!!
cool
Very attractive final product!
thanks
bonito vou fazer um peo meu neto obrigado
You are a very lucky man, because you do not take safety into account when working, you expose your hands a lot, it is not a good example for beginners. On the other hand, the model is very good.
i am getting better at safety as i get older
buen trabajo, :)
Very nice.
the wing wouldnt have been directly over the pilates head it would have been slightly infront but otherwise a great build
you have my subscribtion
You plane came out tight thank you for sharing. I just got a good info to inset the poles to hold up the top wing for the plane I didn't think of that to hold it better for out doors in the wind. 👍
SNOOP U 2 thanks glad you liked it
@@benwynncreations4615 I learns something, I just started on a bi plane body today got the shape. Cut out all the parts wing's prop is what took most of the time, so when it's hung on the porch out side the propeller will spin in the wind. Tomorrow I will take my grinder with 80# grit and sand to the shape I need it to be. It got a rough cut today.
Nice Job enjoyable video
thank you
ben wynn creations s
muy bonito proyecto !
Rogelio M un uh
Joli travail félicitations et merci pour la vidéo
Antonio Sevilla F Nnbb
This is good but I cannot make them at home. So, can I get
something like wooden tankers, trailer, and rescue ladder? The model should be uniquely
assembled and the toys must look elegant.
there are more toys to come in the near future
Very nice! Very, ver nice! Would you happen to have some plans in order to make this plane? I am having a problem with proportions and I really like how yours looks. Any assistance you could lend would be greatly appreciated.
Peter Hunt
hunt me ok
muito bom abraços valeu
thank you
Love the video love the choise on music no f words love it i cant stand videos whit people singing it distract mi atention from the video thankyou
awesome delicate work with so rough tools. Congratulations. However, I wish you had paid a little more attention to the aerofoil sections' details as an old fart who once upon a time flew planes :)
TheSteelWolf you are right about the wings and shape this was a few years ago and have been working hard to get better and build up the tools I have I am going to start doing videos again but hopefully a better product this time
Nothing much; just the leading and trailing edges of the winds and tail surfaces and the prop blades' shape. All else is awesome.
Great job.
Thank you! Cheers!
excelente.
thanks you
Great end result but isn't using a hacksaw on wood kind of like using a nail file on steel?
it is all i had at the time
All you can do is use what you have. I can relate to that. Thanks for responding.
how much is a band saw vs losing a hand?
Little update I now have a bandsaw
Replace plastics.
Slow it down a little bit yet made me dizzy but a great product
sorry i was attempting to keep is short i will need better editing in the future but that gives me a something to work on
Hello
I loved your project
It is to send me the plans in PDF?
thank you
Fernando Nobre
+Fernando Nobre hi but i dont have any plans i make every one diferant from my head but every step i did is in this video
Why did you use green treated lumber, poison for kids?
There is no green treated lumber in it, the body is made from 100 year old beams from a town hall and were untreated the wings are beach wood I cut and seasoned myself the engine parts are mahogany and the back fin it untreated pine as well as the Pistons landing gear nose cone and exhaust pipes
Some of the most cringe worthy use of a mitre saw I have ever seen. Do not repeat
yip got a bandsaw and some sense since then
@@benwynncreations4615 my brother tried ripping a 2x4 the day I got my 12 inch mitre I couldn't tell him no before he tried. It exploded and nearly pulled his hand in. 6 years on he still doesn't like it.
Que forma más mala se hacer un vídeo no enseñan nada
Why do you play that stupid music instead of telling us what you are doing?
I don’t like my voice and you can see everything
Nice work. Nice video. I like the way you work. Great.
thank you
Very nice.
+MrLeonard55 thank you