Hopping wooden kangaroo made with plywood, dowels and metal washers Original design by Wombatmorrison. www.instructabl... Pattern www.instructabl... Dowel making jig Idea from John Heisz • Make A Dowel Maker
Un gran juguete y una gran idea para un excelente regalo para mis niños gracias por compartir tu trabajo Dios te bendiga y a tu familia saludos desde México
fiz hoje 3 cangoroos para meu netinho ele AMOU precisava ver o brilho dos seus olhos,só o coelho que não consegui dar equilibrio para ele .Mas valeu muito obrigado .(Zué Artesanatos)Brazil.
The diameters of the holes are all in the video and you don't need the distance between the holes, just use the template. link to the template in the description. Thanks for watching.
Le hubiera quedado mas presentable si los pasadores que van de pata a pata del juquete los hubiera hecho profundizando hasta cierto punto para que no se vieran a cada lado.
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical. I am not the designer of this, there might be help at the designer's page. Link in the description.
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical. I am not the designer of this, there might be help at the designer's page. Link in the description.
follow the link in the description then on the site click on the plan, another page opens and in the bottom corner there is a download arrow then print.
You are welcome. Yes I made the dremel stand myself but unfortunately I did not film it. If I get some spare time I might take it apart and film it. Thanks for watching.
Maybe the wood it is sliding on is too smooth and also make sure the legs are moving freely. If they are still sliding then using a file scratch some lines on the bottom of the legs to create a better grip on the wood. That's all I can think of, hope it helps.
massoud brother, printout of kangaroo body overall size 140 x60 mm, is it right, or is my printer paste/copy is wrong? any its lovely ,my jigsaw will get its first project,thanks ,abbas
Length of kangaroo from tip of the nose to end of the tail 200mm, Height of the kangaroo from the bottom of the feet to the top of the back 185mm. I hope this helps.
All I can think of that the balance is not right. Make sure you cut and shape the legs at the same time and drill the hole going through the legs and the body at perfect 90 degrees. I think there is some help notes on the designers site, link in the description.
Hi. I just made my first one and had a similar problem. I cut out an extra pair of 'feet' from 9mm ply and glued them on the outside of the originals. The problem seems to be solved. I just noticed you posted this 2 years ago. I might be a bit late with an answer ...
This might be the most entertaining video I watched in 2023. I will use my coping saw and give this a try. Thank you for the very cool video.
You are welcome, glad it was helpful.
Buenos Días 🙋♂️
Les saludo desde Perú 🇵🇪
Dios siga bendiciendo la Obra de sus manos 👐
Mantafff🤩🤩🤩👍👍👍👍
Tigaraksa Tangerang Selatan Banten Indonesia hadir
Thanks very much for sharing the design file. Well done.
Un gran juguete y una gran idea para un excelente regalo para mis niños gracias por compartir tu trabajo Dios te bendiga y a tu familia saludos desde México
You are welcome and thanks for watching. I am sure your children will love it.
I saw this video a while back and have been wanting to make one.
Excellent build. Gonna try these out.
Thank you and good luck with the build.
@@massoudmakes😊
Muito obrigado! Um presente para minha netinha!
Great creative....
Many thanks for the design and for sharing the mold to do it was very useful for a project of wood that had to be.
Greetings from bogota colombia
You are welcome, thanks for watching.
Ivan Herrera
Beautiful mechanical principles based toys
I would have liked to have seen a push stick so his thumb did not get so close to the blade.It is too easy to lose the end of one's fingers or worse!
That is a pretty cute kangaroo, think I might need one of those, thanks for sharing.
You are welcome
Wow gracias !!!!bellísimo gracias por compartir 😍😍😍😍😍😍
You are welcome.
Bellísimo !!!
Very Nice
Thanks for sharing.
Sungguh kreatif bung .....
Very very nice... Best of luck sir keep it up...
Very good!
fiz hoje 3 cangoroos para meu netinho ele AMOU precisava ver o brilho dos seus olhos,só o coelho que não consegui dar equilibrio para ele .Mas valeu muito obrigado .(Zué Artesanatos)Brazil.
I am happy that my video helped you and it is wonderful to know that your grandson loved the toys.
Very good thanks for sharing. From the UK. Stay safe.
You are welcome, be safe.
Really cool 👍👍
Very Amazing!
Thanks and thank you for watching.
Wohoooo....very cool
Here I made a video by watching yours... And the final output was here in this link... If you like this please comment me.. thank you.
Me gustó la idea de el canguro de madera
Muita gratidão, um milhão de bênçãos a ti
You are welcome.
Thank you!
You are welcome.
PARABÉNS!
muy bueno tu video gracias por presentar un buen video gracias
You are welcome.
Gostaria que explicasse o funcionamento de acordo com a lei da física.
This is not my design.
adorei e vou fazer para o meu netinho,obrigado.(Zué Artesanatos).Brazil.
You are welcome, thanks for watching.
Hey, i ve learned a lot of tips here. Thank you
You are welcome, thanks for watching.
Gostaria que explicasse o funcionamento de acordo com a lei da física
Bloody awesome mate!
I'm glad you liked it, thanks for watching.
bien belle cette vidéo !! mais il manque l'essentiel !! l'entraxe et le diamètre des trous pour que cela soit fonctionnel !
The diameters of the holes are all in the video and you don't need the distance between the holes, just use the template. link to the template in the description. Thanks for watching.
Le hubiera quedado mas presentable si los pasadores que van de pata a pata del juquete los hubiera hecho profundizando hasta cierto punto para que no se vieran a cada lado.
Good
Kinder freut euch alle
Wow Mr. Perfect 🎉🎉
Thanks! 😃
Well made
Thank you.
Super work
Thank you.
muito bom abraços valeu
You are welcome.
thanks . nice video
You are welcome, thanks for watching
Gracias.... esta muy bien hecho y es divertido
You are welcome.
Donde se consigue el plano del modelo
very cool !
thanks for sharing
You are welcome and thanks for watching
Very cool! Thanks!
You are welcome.
Muito bom. Excelente.
my kangaroos fall head first and dont hop any idea why i followed the pattern
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical.
I am not the designer of this, there might be help at the designer's page. Link in the description.
Muy bueno gracias por compartir
Thank you
fun to make!!! mine pulls to the left.
Michael Swanson sand the right foot
Very inspiring, someday I will try to make something like that.
maybe you want to see videos on my channel, to share other ideas.
thank you so much friend!
You are welcome.
Por favor onde compro ou consigo os moldes, se puder manda los agradeço abraços
The link to the the drawing is in the description below the video.
I want to make them...
Bạn ơi, sao tôi làm như bạn mà nó không di chuyển được 🙄🙄
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical.
I am not the designer of this, there might be help at the designer's page. Link in the description.
Como puedo adquirir la plantilla en PDF, A QUE PAGINA INGRESO? ME. LA PODRIA ENVIAR?
follow the link in the description then on the site click on the plan, another page opens and in the bottom corner there is a download arrow then print.
thank you. did you make the dremel case? Do you have a video to share on how to make it? Making your own dowels is great.
You are welcome. Yes I made the dremel stand myself but unfortunately I did not film it. If I get some spare time I might take it apart and film it. Thanks for watching.
Wonderfull!!!!
Thanks.
Mine ended up just sliding down the wood, and won’t hop very well. Lol! Not sure how to get it to work consistently.
Maybe the wood it is sliding on is too smooth and also make sure the legs are moving freely. If they are still sliding then using a file scratch some lines on the bottom of the legs to create a better grip on the wood. That's all I can think of, hope it helps.
Por favor mándame la plantilla porfavor
Para hacerlo para mis nietecitos
How do you keep the small files clear of wood dust? Great idea, which I hope to copy for my granddaughter
I don't use small files often but a hard brush should be enough to clear the files. Good luck with the build.
Very fantástic😁👍
Thank you.
Eh eh eh lovely toy man.
Congratulations
From Curitiba / Brazil
Thank you.
Awesome idea, kindly share measurements of this project, please
There is a template that you can download, link is in the description.
Yeah You Can Also Play With It If You Like
genial! gracias
You are welcome.
Excellent!!
Thank you.
Vorrei comperare dei disegni x poterli realizzare ma non so a chi rivolgermi potete x favore aiutarmi grazie in anticipo
The link to the the drawing is in the description below the video.
Awesome
Thanks.
Can you make one for me?
Parabéns pelo seu trabalho !
Gostaria de ter o Molde do Canguru ! Envia pra mim ?
The link for kangaroo template is in the description below the video.
keren
massoud brother, printout of kangaroo body overall size 140 x60 mm, is it right, or is my printer paste/copy is wrong? any its lovely ,my jigsaw will get its first project,thanks ,abbas
Length of kangaroo from tip of the nose to end of the tail 200mm, Height of the kangaroo from the bottom of the feet to the top of the back 185mm. I hope this helps.
Very nice toys.... Where are these made... What's the price for India???
I made them for presents not for sale. If you want to make them, the link to the plan is in the description.
w ktorym miejscu sa otworz to juz tajemnica_
Trabalho bom, música ruim
me parece q lo hice muy angosto xq se cae pa los costados 😐
who is selling this? can i buy
прекрасная вещь
Thank you.
como conseguir o molde do kangaroo . gostei muito obrigado
Link in the description.
,Thank you, but how do you determine the center and is it possible to get the measurements? The link did not work from the description box
This is not my design, it is difficult to measure you really need the pattern. I just checked the links in the description they both work.
@@massoudmakes Thanks
Hi, I have a question. What kind of mechanical operator do kangaroos have?
No operator just the gravity that makes them hop, so they only hop on a downhill slope.
How to download this image?
Follow the link in the description
Hi, can you hang the templates?
The link for the template is in the video description.
Hola como concigo las plantillas
The link to the the drawing is in the description below the video.
Think you should just use the original sound.. instead of the crappy music.. good vdo
This is one of my older videos, I don't add background music anymore.
I made two of them. They were very unstable and would fall over before walking very far at all.?
All I can think of that the balance is not right. Make sure you cut and shape the legs at the same time and drill the hole going through the legs and the body at perfect 90 degrees. I think there is some help notes on the designers site, link in the description.
Hi. I just made my first one and had a similar problem. I cut out an extra pair of 'feet' from 9mm ply and glued them on the outside of the originals. The problem seems to be solved. I just noticed you posted this 2 years ago. I might be a bit late with an answer ...
cool thank you
You are welcome.
Nice
Thank you.
according to instructions, i did one for my grandson, thanx شكرا it works pretty good
You are welcome, I am glad it helped.
Come posso avere il disegno? Del canguro
The link for the template is in the video description.
I need that print pls share me
You can download the plan, link is in the description.
como podria conseguir planos gracias
www.instructables.com/files/orig/F62/Z6KU/GPAS3PNC/F62Z6KUGPAS3PNC.jpg
Maff pak .bisa minta print gambar tidak ya🙏😅
This is not my design, the link for the image is in the video description.
Race 😂😂
que koool :Ç
O desenho das partes tinha como me mandar? Gostei muito do seu trabalho.
can I get the plans
Link to the plan is in the description, click show more.
how much your machine cost?
which machine ?
use scroll saw NOT bandsaw
Bandsaw is the right choice. Scroll saw would work as well but the blade is too pliable and making even cuts across too difficult.
👍👍👍👍💖💖💖💐💐💐💐👵
❤