- 31
- 3 120 345
Massoud Makes
Registrace 7. 01. 2013
Bluetit nest box 2024
After last year's abandoned nest with eggs, this year it looked more promising for a successful bluest nesting but unfortunately due to some factors mainly the cold weather and the lack of food the chicks didn't survive.
zhlédnutí: 48
Video
We lost all the chicks.😔
zhlédnutí 172Před rokem
We had a pair of great tits nesting in our garden but unfortunately for some reason all three chicks died.
Abandoned nest, update.
zhlédnutí 98Před rokem
After monitoring the nest box for a while and noticing no activity, I decided to clear and clean the nest box.
Abandoned nest with two eggs.
zhlédnutí 178Před rokem
The nest is not finished but there are two eggs. I wonder what happened to the birds and what to do next.
Robin Birdhouse Bee invasion and camera upgrade.
zhlédnutí 411Před 2 lety
The robin chicks have already fledged but as robins usually have two or three broods a year, I thought I would get rid of the invading bees and clean up the nest box. Also I have upgraded the nest box to accommodate a camera.
Robin Chicks are here but in danger from a cat.
zhlédnutí 715Před 2 lety
This is an update video about the robin nest box and also trying to protect the chicks from the invading cat. Making this nest box czcams.com/video/7YbWCSzFTJs/video.html
Bird House with easy access front panel.
zhlédnutí 386Před 2 lety
A DIY bird house made from pallet wood. This design allows for easy access via front panel for cleaning and inspection. A simple woodworking project.
How I added soft start to my Makita MLT100 table saw
zhlédnutí 10KPřed 3 lety
In this video I show you how I added a soft start module to my Makita MLT100 table saw.
How to make a 2 in 1 BIRD HOUSE, a basic woodworking project. Easy DIY project video.
zhlédnutí 2,9KPřed 3 lety
Making a simple bird house that can be used either as a closed bird house with a hole for birds like blue tits and great tits or as an open fronted bird house for birds like robins and wrens.
How to make a low cost BIRD HOUSE with colour camera. Full build video.
zhlédnutí 4,2KPřed 3 lety
Complete build, including the EasyCap USB capture device setup. A DIY project. I used palette wood and other recycled materials to build this bird house. The video can be viewed on a TV or a monitor but I am using a computer to view and record it. It cost me about £25 to complete this project, but the price of some of the components have gone up since. Camera, USB capture device, extension cabl...
Plant pot bird house, a simple DIY project.
zhlédnutí 204KPřed 3 lety
Making a plant pot bird house that can be used either as a closed bird house with a hole for birds like blue tits and great tits or converted Into an open bird house for birds like robins and wrens. Bird house designed for robins czcams.com/video/7YbWCSzFTJs/video.html Bird house with colour camera build and setup czcams.com/video/VxaJ72EHOAs/video.html An easy to make 2 in 1 Bird House czcams....
New brake pads for Seat Leon.
zhlédnutí 4,5KPřed 3 lety
This is how I changed the front brake pads on Seat Leon. It is an easy DIY job.
Makita table saw on wheels.
zhlédnutí 457Před 4 lety
I made my Makita MLT100 table saw mobile with just two castors. A very quick and easy way of adding castors to my table saw stand. I first added four wheels to the bottom of the legs but then realised that two wheel option is much better and no need for locking castors.
Mobile phone holder with articulated arm.
zhlédnutí 1,2KPřed 4 lety
A DIY mobile phone holder and articulated arm to go with my mobile stand. A very useful addition to my workshop for making youtube videos. Link to making the stand video : czcams.com/video/S2uEdwsh_3E/video.html
Mobile stand for mobile phone
zhlédnutí 113Před 4 lety
A simple DIY mobile stand for mobile phone or small camera for making youtube videos.
Removing damaged wheel lock nut on fiat 500.
zhlédnutí 23KPřed 4 lety
Removing damaged wheel lock nut on fiat 500.
How I changed oil and oil filter on VW up
zhlédnutí 21KPřed 4 lety
How I changed oil and oil filter on VW up
How I changed the rear shock absorbers on Fiat 500
zhlédnutí 3,8KPřed 4 lety
How I changed the rear shock absorbers on Fiat 500
How I replaced the brake pads on Fiat 500
zhlédnutí 8KPřed 4 lety
How I replaced the brake pads on Fiat 500
A very simple Floating TV unit for £10
zhlédnutí 1,1KPřed 4 lety
A very simple Floating TV unit for £10
How I changed brake discs on Vauxhall/Opel Corsa
zhlédnutí 962Před 5 lety
How I changed brake discs on Vauxhall/Opel Corsa
Vauxhall/Opel Corsa Indicator flashing too fast
zhlédnutí 259KPřed 8 lety
Vauxhall/Opel Corsa Indicator flashing too fast
Why didn't you use any copper grease on the ends of the pads?
You’re a good man mate for taking the time to make a video like this! I’m sure it’s helping a lot of people out there that are pretty clueless when it comes to this thing!! Top tip - release the handbrake so you can lower the rear axle!!! Best advice you gave your viewers mate.
Thanks for watching and kind comment.
Thank you, sir, We’re taking the time to make this video really helpful
you are welcome and thanks for watching.
Its best to disconnect the battery before fiddling with the relay box. On some Vauxhall models removing the battery allows easier access to the torx screws on the box lid anyway. Replacing those torx screws with hexagon bolt headed screws is a good idea . The torx heads fill with muck and corrode on older vehicles. Either way ,a smear of copper grease on reassembly will make things easier next time the lid has to come off. Good video
Thanks for vedio big help i try this and it work for me 👍
You are welcome.
Why couldn’t they have fitted it in the fuse box with the other relays ? Ridiculous to get to , Thanks for video 👍
Yes it's not a good design, thanks for watching.
👍👍👍👍👍👍
Pourquoi les vidéos de coupent ?
What bird will make this a home ???
Here in UK usually bluetit or coaltit.
Somehow I don't understand the need for Softstart on the Makita MLT100. I've had it for over 4 years now and it has almost no jerk when the engine starts and revs pretty smoothly. The Metabo KGS 254 miter saw has quite a large current surge and I gave it a slow start there and it's great. But in my opinion, the Makita MLT100 saw does not need it. But that's just my opinion after many years of use.
In some countries Makita MLT100 comes already fitted with soft start but in my case here in UK the saw doesn't come with one so the saw starts with a very loud bang which might not be as obvious in the video.
When i turn on my škoda citigo the engine is shaking a little bit just like yours and i can feel it from the inside while in neutral, is that a problem?
I'm not sure, mine is running fine like that.
Looks good can you please tell me about the entrance size thx
W 65mm, H 105mm
Thx
Looks good but can you please tell me about the entrance size thx
Very useful to know where sump plug and filter are so i dont have to root around under the car for ages. Thanks 👍🏾
you are welcome.
L❤VE form JAPAN
What is the point of that.
See the description of the video.
I like the jig, good idea.
Hi were to order the same soft start for 220v
I ordered it from Ebay UK .
Great creative....
Gostaria que explicasse o funcionamento de acordo com a lei da física
Vorrei comperare dei disegni x poterli realizzare ma non so a chi rivolgermi potete x favore aiutarmi grazie in anticipo
The link to the the drawing is in the description below the video.
Race 😂😂
Wow Mr. Perfect 🎉🎉
Thanks! 😃
Por favor onde compro ou consigo os moldes, se puder manda los agradeço abraços
The link to the the drawing is in the description below the video.
Ok
Ok
Hola como concigo las plantillas
The link to the the drawing is in the description below the video.
Thanks very much. I tried to follow your guide and it worked well.
Glad it helped, thank you for watching
Sungguh kreatif bung .....
PARABÉNS!
Good,good....👍
Thanks
Good video, very helpfull, cheers
Glad it helped
Gostaria que explicasse o funcionamento de acordo com a lei da física.
This is not my design.
What a simple??
How to download this image?
Follow the link in the description
No big work shop just Basic tools and reclaimed materials, great job I'm going to make a few
my kangaroos fall head first and dont hop any idea why i followed the pattern
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical. I am not the designer of this, there might be help at the designer's page. Link in the description.
Mine is deffrent from no yellow like here
Sorry, I don't know. May be it's different in different countries.
Easier to remove the old whole unit first... Then take the top off to replace the filter... Saves trying to remove those awkward to get at back screws.
Yes you are right, I didn't know that. A couple of days ego I wanted to change the spark plugs which are under the filter box so I tried to remove the box but unfortunately the small pipe on the left of the box would not come off and I had to twist the box with the pipe still connected. Not a good idea but I had no choice, so if the box comes off properly then that's the best way.
@@massoudmakes Yes that pipe can be difficult to remove... You need to break the seal formed between the pipe and the spout... Just gently force a small screwdriver between pipe and spout... It will come off without damage to either.
What can i do for green an white vertical lines. I replaced the tcon because I had no pic. now I have pic and i also have green and white vertical lines. Is the new tcon board also partially bad? its used
Sorry I don't know as I'm no expert.
Whats up with eggs now?
I waited for about ten days but no sign of the parents so I decided to remove the eggs and clear the bird box for other birds.
Bạn ơi, sao tôi làm như bạn mà nó không di chuyển được 🙄🙄
I don't know why that is happening, make sure the legs move freely and the angle of the ramp is also critical. I am not the designer of this, there might be help at the designer's page. Link in the description.
Haha Pac-Man
Cool idea, thanks for sharing
SUDAHILAH HACK KRIMINAL LO NJING..SUDAHI KEJAHATAN LO. CAPEK SKALI GW MNDERITA 9 TAHUN BAJINGAN. TDK ADA HIDUP GW SLAIN MLIAT MNUNGGU LO MENGAKUI DPAN ORTU GW KLUARGA GW TAIK. HAPUS APLIKASI ANJING LO. LETIHNYA ORG TRUS LO ZALIMIN TRUS LO SUSAHIN SMPE KARTU JD MATI NJING
Not working you 😢fail
hahahaha good but there's more easier way like Nut Extractors))))
Yes I have been doing this too on 2010 opel Vauxhall combo van ...I have ordered a relay switch and I hope all goes my way...thank you for the great video ...
You are welcome.
Thanks for the video, worked first time so much appreciated.
You are welcome.
Hi, my blinker sound stopped working. Can this be caused of a relay or it is maybe a cable or a speaker broken?
I'm not sure how the sound is created. I always thought it's the sound of the relay but these days they seem to be fairly loud so I could be wrong.