ABANDONED Mercedes Ponton WILL IT RUN and DRIVE? NNKH
Vložit
- čas přidán 10. 05. 2024
- This old Mercedes "Ponton" 190 has been sitting for MANY years. Is it savable? Will it run? Do German cars hold up to neglect as well as we've seen old American cars do? All that and more in this video.
THANKS SO MUCH FOR WATCHING!
~NNKH Shirts / Merch: www.NoNonsenseKnowHow.com
~More NNKH Links @ linktr.ee/NoNonsenseKnowHow
~Where I Get My Hardware: www.BoltDepot.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Awesome Channels You Should Check Out:
~Jennifer Sugint: / @jennifersugint
~Vice Grip Garage: / @vicegripgarage
~Trail Mater: / @trailmater
~Junkyard Digs: / @junkyarddigs
~Andrew Camarata: / @andrewcamarata
~Pole Barn Garage: / @polebarngarage
~SleeperDude: / @sleeperdude
~Project Farm: / @projectfarm
~HeavyDSparks: / @heavydsparks
~DEBOSS Garage: / debossgarage - Auta a dopravní prostředky
Follow up on this video czcams.com/video/uy9uywYY6Tc/video.html
Saw a lot of comments about it being shame to scrap a car with all the good parts on it. They're only good if people need them and are willing to buy them. I listed this car is the parts car before even picking it up. If you're interested in something, shoot me an offer. Would be great to see somebody use the glass or other usable items
Good for you Chris tell ‘em as it is
Dude you’re a warrior when it comes to these videos.
I have no doubt we’ll see that 4 cylinder engine again being put back in service. Now we just need to get you moved out into the country. Should try the south.
The '53 to '62 MB had some of the first "pontoon" styling in which the fenders and the body sides were all on the same basic plane. They were some of the first unibodies with crumple zones which made them safer in a crash but also made them more prone to being slowly totaled by rust. I had a 1961 with the fins. It had diagonally opposed brakes, a plastic brake reservoir, and seat belts well before most cars. These had a very fragile ether bulb and long copper tube for the engine temp gauge. I'd be amazed if it still worked, but if it did it would probably be worth some money. ALSO, the terminals for the Bakelite electrical connections under the dash for these are silver. It might even be solid silver, but I'm not sure.
So if you hadn't pulled it out of there it would have a) rusted into the ground and been useable to nobody or b) gone to the scrapyard whole anyway. Some people need to engage their brains before they start commenting on stuff
If your still going too sell your house 🏡 I like too see pictures of it and price , tired of the south and 110 summers that's in the shade ...
THANK YOU FOR CALLING OUT WHISTLING DIESEL! I AM SO HAPPY YOU FEEL THE SAME WAY! Much love to you man!
This isn't something I often see people commenting on in your videos: you have such a natural talent for compelling visual storytelling. You could remove the audio from most of your videos and they would still be captivating and make complete sense. It's little moments like the shot at 19:40, where you clearly took the time to set up a camera just for a shot of you looking at a bag, that show how acutely you understand the power of visual intrigue.
I think this is a huge part of why your vlogs are so successful and will continue to be. You share with us your organic everyday experiences but go the extra mile to make them feel like more than just everyday videos.
Thank you so much for all that you do here. Your videos warm my heart.
Reasons people watch your vlogs. 1) you’re genuinely nice people or amazing actors 2) you know your stuff 3) you find interesting vehicles 4) you obviously love each other and are a great match . I wish you all the best in life. Cheers from Toronto
Ditto from Ottawa!
Middle Tennessee mirrors that sentiment..lol
NNKH💥👍😎
You said it perfectly, Dr Anderson! Right on! Jen & Chris are the real deal - always a pleasure to watch their collective and singular work - a treat for the orbs and CPU of my head!
Southeast Missouri supports y’all too!
@@lawnboy46Central Missouri supporter here as well. I was down in Poplar Bluff area for the eclipse. Magnificent sight to see.✌
Amazed to hear that MB idle after sitting for almost 5 decades
Poster child for “they don’t build them like they used to”
Hope it finds a good home and lives on for years to come
Ran surprisingly well huh?? 😂
@@jeffreebailey4464yes I totally agree with you with trying to Preserve
did u not see it junked lol
@@Fony_turgeson But the run ning engine was not scrapped. There was nothing worth saving on the car except the engine.
The band saw was the best part of the video, the car not so much 😂😂
You cannot even compare your channel to the Whistlin Diesel guy, you respect cars and try to save them. Not in a carshow display condition, but at least functional, reliable and running, your passion is shinning through your videos, and so are your skills and mindset. I think we all admire that, not to mention you bring us all in cool adventures. I think we all can tell by now you're just genuine, and with or without camera, that would be the same lifestyle, cause you get the thrill from it.
The Whistlin Diesel guy is the typical young rich kid, who had everything in his life, and has no particular skills but spending his money in stupid ways, faking some publicity stunts and destroying things the average joe could never buy in one life, for fun, and for an absurd amount of view and money, in the way selling merchandising to his community, which is probably pretty young. He's just this kind of talentless, views grinding youtuber, almost a Logan Paul for automobiles. Best thing is to ignore him anyway, I suspect nobody liking NNKH would appreciate the guy's "work".
I like both. Whistling diesel is just absurd. Definitely one video every once in a while just to see some carnage. Maybe roll my eyes a couple times. Nnkh though is just RELAXING to watch. I could watch for hours! Love your videos Chris!
Whistlin diesel is a no good moron that is not even worth talking about.
i'm no whistlin dicks fan BUT i don't think he started out rich , but he's the poster child for "you can't buy sense" ... that being said he definitely knows how to make money , i just can't understand why anyone would buy the hideous and overpriced shirts he sells ... i think most of his customers are young kids spending THEIR parents money
Did the conflict with the landlord stem from the crazy guy that maneuvered the truck out in the middle of the night with a loud muffler? I bet nobody like that and you should have camped out until morning; though you did have to go out the wrong way up a one way street, and that might only have been doable in the wee hours, so I don't see any good options.
First 3 minutes and you have done more problem solving than some folks do in their life !! Love it.
NNK, i wonder if you could poll your commentors on how much they like a paticular design when you do a "Will it Run" episode. Then from the encouragement in the comments, reach out to the vehicle brand, pointing out how much the classic design is a favorite. Especially the engine compartment, windows, seats, headlights, console, etc in how a specific year Wows the car buying public. After they see a 360 up close.
Maybe that gets a modern model with lighter bodies & hybrid engines, regen braking, etc.
Maybe gets you some State of the Art tech parts for revealing how some classics need more retrograde to durability and old guy design.
Sorry if I have said this before, iam a stroke survivor. (Lived). Your adventures give me hope. Thanks.
Stay strong
I know what a struggle it can be surviving a stroke so I give you props that you keep on pushing and I'm glad you get some joy and satisfaction from watching these videos.. I do too
as opposed to a stroke sUrViVoR who didn't live but is typing a youtube comment??
That aluminum hood and especially that front grill might have been worth something….
I was thinking the same thing, I would have saved the grill for wall art.
IIRC someone said that there are alot of those cars in the States which means alot of hoods around
Borgwards are my thing,but I have owned,170 ds, 180,190,and 2. 190sls
Smart move because the engine sounded surprisingly good for its age!
I'm a amateur woodworker and antique tool fan. I am so glad that you appreciated the value of that bandsaw and were able to save it!
Chris, as an MGB enthusiast. If you can get the hood and luggage rack off that car, thry are desirable. Not huge money, but certainly enough to be worth your while.
There should be two little metal tabs on each side of the hood hinges where you can put that hood straight up in the air
Too late
Even on the old ones??
Not on the Ponton
@@emspera i didnt think so!!!
I was popping on just to say this! There’s very little that MB didn’t over engineer back in the day.
Chris ,Just keep doing what your doing , there's only one person you have to please and that's you ,with better than a half a million subscribers your doing something we like keep doing it .
Agreed. Chris is a hard working dude and it's paying dividends for him I'd imagine. Half million subs on THIS channel. Guy has a few channels and if memory serves me correctly he has even more subs on nnkh2 where he reviews stuff. Honestly he deserves all the growth, man never sleeps.
I would have saved ALL the glass, the door handles, window winders, headlights..... basically anything that could help an enthusiast rebuild a classic.................there's NO way someone could find those windows, to the right customer they'd be worth a fortune!
They are worth a fortune one day to the right person yes. But I've had the car listed for a month now as a parts car and zero interest
@@NoNonsenseKnowHow puddins fab shop might be interested in parts. he's bought one like that
I think you were right scraping the MB, but you might help your lady & you make some custom lamps or wall decorations. The steering wheel would have made a fun table center piece or plant pot base.
@@NoNonsenseKnowHow A month is nothing. I had some way more modern parts listed for years before someone bought them. Not too much money, but the fact they'll help another vehicle to survive, is very satisfying.
Whistlin Deisel is an affront to all of us who just try to keep our junk running!😂
_ _ _ hole to alota people , entitled smart bleep kid
i belive HE started out that way. people like what he does ,hence the views . dont hate on diffrent content.
I completely agree but that’s the great thing about our just about still free western society. I’ll fight for his right to do his thing as much as my own. I have the freedom not to watch it!
Man u sure found a sweet ass roll back
@@landrover90 spot on👍
Chris, Mercedes-Benz manufactured the "Ponton" (German for pontoon-- referring the bulbous body) from about 1953 to 1959, basically. The next series was the "Heckflosse" or swallow-tail, which was what they called the model with tailfins (which remind me of an old Rambler somewhat). I had a 1965 M-B 190D with the 1.9 liter diesel motor that was a dark grey similar to that Ponton. Rated at 69 bhp, it wasn't a speed demon, but it ran great. These models of Mercedes had an issue with rust (like most European cars of this era) especially in the frame.
I enjoy how you approach each job and you don’t waste very many steps,like mowing where the tow pig was after you moved it. Tech’s like you are very rare. You are gifted with the rare common sense element. Not seen much today.
Another great will it run! Never expected that to fire up so quick, nicely done.
You definitely made the right choice scapping the entire car as is, everyone will tell you how valuable this or that part is, and yet no one buys it. I sat with two cars worth of 115/114 parts for several years, including all glass, and no takers even free. Ended up scrapping most in the end. You just sped up the process.
I wouldn't have any idea how to get that old Merc out of there. Your can do attitude is amazing!
I'm with you. Whistlen Diesel is an obnoxious punk with too much money. Quit watching a year ago.
agreed. Me too.
I never did I heard about his BS and knew I would be better off and save some brain cells I'd surely lose by watching.
womp womp
I don't think I've ever watched a single one of his videos. The only reason I even know who Whistlin is would be due to Cleetus McFarland lol
I just find him extremely annoying.
Agree completely. Love the way you clean these old vehicles, no matter if you'll save them or not.
Just can't stand watching cars get crushed without saving the few parts that are usable.
There's always someone that can use a window glass, trim piece, or in this case, a great little 4-pot.
Good job!
Chris, I was like oh man this POS really? But WOW man that was FANTASTIC ! that little engine is a beauty, I wonder if it would fit and work in a little import pickup or something. Whatever it is I and ALL of us will be here ! You are one TALENTED Guy !
GREAT CHANNEL !
You know these Mercs have a service position for the hood 😊
Now we do
Das ist richtig.
Im right there with you Chris. These are my favourite types of videos you do. Saving the old stuff even if its just some parts. Good to see something different too.
Keep it up man.
I know nothing about cars, but this is by far my favorite channel, keep it up Chris!
Save on it! Thanks for the fun adventure mechanic content NNKH! It's always great seeing you in the feed!
Almost ZERO cars made in the last 20 years would be able to do this in 50 years sitting like this.. so much crap plastic and delicate electronics.. it honestly amazing this thing ran with so little effort.. and such a cool car, lots of history with the old Mercedes.. i bet many people are looking for a running motor like this.. great job !!
it's incredible that this engine starts almost on the first try after all these years 😮😮😮
Just picture the great condition of that Ponton - on the day that it was originally parked there! How the cars life has been wasted by some stupid owner. Thousands of valuable cars have ended their days in this way.
So many questions…. How come you didn’t use the roll back to,pick it up? How can you tell honey bees apart? Is there anything you can’t do? Lol 😂🤙
I absolutely love it my man when you hoover and pressure wash any project vehicle. It makes me happy!!! 😊
You’re a legend mate, love your content and always watch anything fresh. Binge watched older stuff too btw.
Keep them coming bro….
Man love…. From south west UK BABY!! 🙏🤝🤜🤛
20:50 Best ever entertainment EVER
Mr.Gus Legs McGee Run gus run
Watching this on my iPad, while watching the Phils on TV. Great msg during the power wash.😂 Love your videos. Got my 1996 25hp 2stroke Tohatsu outboard running the other day, after 14 years of sitting idle. Watching your channel was a huge inspiration for that to happen. 👍
Chris...you, Jennifer Sugint, Derek Bieri, Dalton Summitt and Kevin Brown are my favorite to watch on CZcams! I just absolutely look forward to yours and Jen's new videos when they come up! Thank you for being awesome...I love your content! I also agree with you about Whistlin' Diesel... can't get down with destroying good stuff either! Shame on him! Stay awesome man! Alberta, Canada loves you!
My mouth dropped when you put the Jfegwo on it and it cranked like it ran yesterday! I was saying after you opened the hood, “NO WAY THAT RUNS!”
greatest sound ever. an old motor starting after a layup. nice band saw too.
Agreed about your comment regarding whistling diesel, you have to wonder about the type of person that enjoys watching that rubbish. Says alot about his audience tbh.
i like working on old stuff too. but every now and then we take one out and wreck it. if Chris were so concerned, why not restore that Benz??? instead of tearing it up with the tractor?? diffrent views for diffrent folks.
Small minds
@@thomasgirty6397 there is a difference between what you do and what that whistling guy does. I hope you see that.
@@thomasgirty6397 "why not restore that Benz?" Have you look at the other video? It seems that this Benz is in such a bad shape that it is beyond reasonable restoration !
I really enjoyed this one! My first car (1975) was a 1959 Mercedes 190. It looked very similar to yours, it had the big 6 cylinder and the 4 speed on the tree, electric clutch. Low compression in 2 cylinders, clutch slipped but we had a great time in it! All the “cool” kids had mustangs or Camaros but those kids had nothing on me! Sold it to a “Mercedes guy” took the money and bought a VW squareback
then it was a 220 ponton the 190 never came with a 6 cylinder
@@rudiknapen4867Perhaps….it was a Long time ago.
It's always fun to watch your videos Chris. You are genuinely a cool guy. As far as Whistlin diesel goes, he’s an idiot.
Is there anything you can't get running, your a magician.
A very, very rich idiot. Guess he ain't that dumb after all, eh?
then why didnt YOU spend thousands of dollars restoring that Benz???? i was upset that he abused that tractor lifting that junk up. why even bring WD up??? not happy with YOUR view's??? C'MON MAN !!!
There's a reason why German engineers are respected worldwide. This Merc engine is an example.
the old-school Benz R&D, engineering. DW has a whole show on the slipping of German quality, interview ex-Benz engineers, restorers, auto journalists
Yep, it's early life was in a truck on the Eastern front.....
Not nowadays
czcams.com/video/sDO6l8MqPsg/video.htmlsi=i3b0Acxvuq71VFH2
Hello friend from Argentina, I have been following you. I send you and your family a hug. I don't know how to speak English or write English, I only know Spanish, but with the cell phone application I hope you understand it, a big hug.
I was so happy to see you take on that Mercedes. On the caddy video I made a comment hoping you would take a swing at it and I love that you did.
The reason I watch your videos is because mechanics is in my blood. Dad is a an independent mechanic here in Oregon. Owns and runs his own shop for 35+ years. Specializes in Mercedes and BMW. Mostly older ones. I know many of his customers, good people. When one passed away I was able to purchase his Mercedes. A 1998 E320. However more importantly, a car that my dad had maintained for decades. Two years of ownership with few issues.
I asked dad about this particular Mercedes and he shared some of his knowledge. What he told me lines up pretty well with what we see in this video. He said the engines where the best part of these cars. "bulletproof" was the word he used. Everything else was problem after problem in his experience but the engines would run with minimal effort or maintenance. I spoke with him after watching the caddy video so I had not seen this one yet. He brought up the rear suspension and axle being a source of problems for the car. Then I watch this and the rear axle is all kinds of messed up.
He also talked about the hood problem, not new for him being a Mercedes mechanic, those hood attached grills being difficult to work around but later Mercedes had hinges that allow the hoods to go up higher, my E320 has a hinge button that allows the hood to go up 90 degrees.
What's the name of your dad's shop?
@@TireSlayer55 I am hesitant to name drop since his shop got review bombed by a disgruntled customer a few years ago.
Auto Haus of Bend.
Love the shot of budd plant at the very end there. Snuck my way in there a few times over the last few years. A cool little explore with automotive heritage if you ever find yourself being devious these days still.
I was skeptical, until you made it run. Amazing. Joy all around.
i love seeing those old cars run again it always amazes me how they always just start right up after sitting for years it's that old school stuff it was meant to last
The exact reason I watch you and VGG. saving our automotive history. I have a one owner 93 Chevy truck it will live as long as I do and hopefully long after.
Absolutely enjoyed the video Chris. I would of saved the grill it would of made a nice wall hanger. Hopefully you will go back and get that wagon. Thanks for taking the time to share. D
Thank you for your content. Greetings from Lithuania!!!
My great grandparents came from Lithuania
The "I
Great video Chris.
Fantastic to see you get these cars running & the stuff you work on.
Always love a NNKH video ! 👍
HEY! Hello Chris and Jen! Thumbs UP!!
Happy Saturday Chris
I hope you guys are going to be flying to the west coast for another "will it run and drive home" video. Love those. I said it before, you are the real Chris Fix.
Again awesome video, it doesnt matter if it wont drive, you gave this old MB its last breath before letting go of that bodywork, so crispy and rusted its beyond repair. If that engine and gearbox finds another owner, would be cool 👍🏻
We appreciate your effort in salvaging the heart and soul of this vintage MB
Every time I see you going to rescue one of those crunchy rat traps I think "what a pile of junk! what's the point???"
But then when you work your magic and make the engine run again after IDK how many freaking years, I get it!
Keep up the good work! Greetings from Brazil.
Zündfolge = firing order. Pronounced "ZYOOND-FOLGUH". That bandsaw is super neat!
I've learned so much from this channel. Even enough to work on my own car
A hundred years ago that must have been a hellava nice neighborhood.
It's super cool when I learn about a car I never heard of. Now the Volvo I knew because I'm a Volvo enthusiast, but the Mercedes Ponton is new to me. Can't wait to see the rest of this video. Thanks NNKH!!!!
Chris and Derek from VGG are my car repair idols. Can't watch whislin diesel anymore makes me cry 😂
I hate too see old class cars destroyed ...
It's better for the environment to keep old cars on the road than to manufacture new ones.
Who doesn’t?
Yeah, but that one was just too far gone. Unless there's only one or two left in the world it just wasn't worth it.
There where still salvageable parts even the grill is worth a fortune.
After pulling that running engine, he swept and vacuumed half as much as he hauled to the scrapyard. That was a right neighborly favor to haul off.
I look foward to every video this guy posts. great channel and great guy
Shout out to PB Blaster products. They really are the best. Use them all the time. Hi Chris and Jen! Enjoying it as always :)
I enjoy every video you have posted, as well as Jen’s. Boundless enthusiasm and energy! Ya know how to take care of business . And you get to do what you want to do, when you choose to do it. I recognize the location the Benz was at from the long night you spent helping get the Uhaul truck on the road.
"You guys are probably thinking I'm a weirdo for messing with this junker."
A little bit. ❤
Had to be said.
Find an old Falcon or Chevy II for that engine! Love the channel!
HI CHRIS ,, YOU CAN GET ANY CAR GOING !!! THX. FOR THE LESSEN.. WE LOVED THAT YOU WERE SPRAYING THE MOSS OFF THE CAR AND YOU SAID I LOVE JEN,, 21:20 ,, YA!! TAKE THE ENGINE TRAN, AND THE WINDOWS, DASH AND OTHER GOOD PARTS.. PEACE ...
What a great find Chris. Love that you share this with us.
Great video and great channel. Don't change a thing.
I appreciate that man! Thank you
For an Englishman it's really odd to see you get a car on the road that'd never pass an MOT in the UK.
I know right, their inspections are definitely less strict than here
depends on where you are. my state has inspections and this would never pass just for all the rust. some states have less rules.
@@itsmephil2255 I heard in some states there is no MOT at all
A car that age doesn't require an MOT in the UK
I feel sorry for you guys thank god we have more freedom in the USA move to a better place
I love what you do and your video format is perfect! Bringing these old vehicles back to life, you are great, your partner and the dog, good luck, keep moving towards the best possible....
J'adore ce que vous faites et votre format vidéo est parfait ! Redonner vie à ces vieux véhicules, vous êtes formidables, votre partenaire et le chien, bon courage, continuez à avancer vers le meilleur possible...BEN de FRANCE
That engine ran amazingly! Really cool to see and hear it fire up. Must've been a cool little car in it's day. Makes me think of my late uncle who used to get old used Benzes. He would have probably known about this model.
Get the Amazon too please!
Hey buddy. I am a Ukrainian living in Canada. And I watch your videos with great pleasure. I wish you good luck in the development of the channel! Respect!
HUGE fan of your stuff. Im an HVAC guy, grew up working on cars with my Dad who was a 50+yr Ford milright @Livinia Transmission.. There's something to be said for being booksmart, but you have the ability to find solutions in a totally different way.
Love your cross country fly and drives. I wish i had 10% of the auto repair knowledge you do.
Keep up the fantastic content. Hope Gus and Jen are doing well too. Take care and stay safe, brotha.
Chris, it's great! Thanks for showing us this! That 4 banger sounded great! Thanks for saving it. I am sure there is someone in the world rebuilding an old cool car like that and needs the parts from that engine or the entire engine. So, thank you for saving it! Love the videos. You are about the most real and genuine guy on CZcams. Keep it real my friend.
I used to watch Whistlin Diesel, but got annoyed by the destruction after a while. I like your channel more for many reasons. It's interesting what will happen getting into these relics. You and Jen seem to be really nice folks, and Gus is a riot to watch! Not to mention, you're kinda local to me as I live in Upper Bucks County!
Hearing about whistling’ spoilt brat , they came over and bought some of our old tanks , guess they are wrecked now too .
probly. since there not an Abrahms.
@@thomasgirty6397 Abraham’s merely the easiest target on the battlefield , noisy , and the best heat signature out there .Leo 2 A5
Always shocked to hear that combustion kick in. Nice salvage of that engine. I know nothing about classic cars, but I would think those body panels would be worth something to those who restore these old gems. They looks rusty, but solid.
yeah same with the trim, glass ect my thoughts exactly but i guess he thought that 4 banger from the stone age was worth more than panels XD but take a 4 banger out to shove another 4 banger back in haha
I can't believe the carb jets were still clear enough to flow after all these years. Amazing. And I'll bet this is the first time anyone removed an engine the way you just did!
Pretty cool that it practically fired right up. The band saw is an added bonus, love the design of old tools.
Wow, where you live kind of depresses me how congested it is props to you brother for being able to handle it
Ya he seems like he should be a rural guy
Are you kidding me? It was a beautiful day!
He pisses me off too. He's ruined alot of nice stuff.
and worked hard to get where he is to do it. diffrent content for diffrent taste's. i like Chris's video's but i like to see a Ferarri get pounded on too!!! that car was tougher than i thought.
I'm still doing my project on MMC 1999 everything just fine ...! 🎉 Luv the videos , long time no see.
Love this!! Totally agree with you, the old quality built things need to be salvaged if possible! You're AWESOME! Look forward to more of this! Thanks for these types of videos!👍
Built in Germany, felt to rust in pieces in the USA 😂
The OM606 Turbo diesel merc engines are pumping over 900 bhp here …on stock,pistons & crank ….. panzerkräft
had w201 with om603 400hp 700nm thing was rocket, we call them superturbos here in finland
I agree with you.Keep it up , don't stop Chris
G,day Chris, Jen, Gusman and Turbo from Sydney Australia.
Pity about the MG that would be a nice red sport car.
I can see the Mercedes Black or Grey. New hoops, caps and vinyl seats.
I still appreciate your tech talk. I'm listening and learning bud!☔
Fun Fact the jubilee hose clip was invented by a British Navel officer Commander Lumley Robinson in 1921
Awesome video Chris 👏🏼
Philly Mob used that band saw to chop up Hoffa. Fact!
Did they haul Hoffa to the saw, or did they haul the saw to Detroit to saw up Hoffa?
I enjoy watching you work! Nothing you cannot figure out keep them coming!🙏☮️🇺🇸
Thought there was no way it would run. Awesome! Puddin might want that for his car he bought!
You need to think a more before you start smashing stuff up, because they could be worth something👍🇬🇧
I have it posted on marketplace for quite some time before doing any smashing. No interest in any parts from anybody at the moment
Sir, the body was a waste... MAYBE some interior pieces and some glass thats all that was left of the poor girl.....
Lol, Chris, you saved some excellent parts. I was glad the MB went to the crusher. It would have been a total waste to try and drive. Your explanation at the end was spot on. Thanks for the cool try.😂
Am number one
What....Commander Riker from star trek??
Seems like a miracle that old rust bucket was actually running. I watch this channel because of the anticipation to see if a car will actually run.
It was probably parked in the 70s with some minor problems like needing brake work or suspension issues because the cool new thing then was to get a car with fake wood trim, cheap as can be materials, and an 8 track player. The quality Mercedes was looked down upon as antiquated and obsolete. Sad that it went from a car someone paid a premium for new and loved to rotting on a dirt lot for nearly 50 years. That drivetrain would be nice to drop into some other car of that era. It’s great that was saved.
Such a good video ! Love these videos , way better than any tv show , solid work