I actually got those with the R&D billet steering system as a set. It was one of the last systems West Side Powersports had in stock used. I wanted bars so they sent me the protaper bars that didn't work out on one of their spark builds, they were lightly used. They entire steering system bars and finger throttle with clip ran me right under 500.00 shipped. Best thing I did to the ski for controls. Look at protaper se bars online you should be able to find the same set. These are wider than normal but I'm 6'2 with long arms so they are perfect .
@@KelbyCheatwood I found it on Amazon , Eling digital gps. I believe it was the 52mm size and it fits right in there. I mounted the transponder in the hood for good reception. I bought a black one. Sponsored Visit the Store, ELING ELING Visit the Store 4.4 343 ELING Warranted Digital GPS Speedometer Odometer Kit for Car Boat Motorcycle with Red Backlight 2'' 52mm 12V 24V       
At least that's as close to what I remember. It's been some time since I messed with the GPS. It works well and you can just install and be worry free. I took the gamble and it worked great. Even plugged up to battery in my truck to Rd test and it's accurate. Hope this helps you out.
Yes it just bypasses the stick wiring if the motor works inside the box. Easy way to tell is disconnect factory wires at the box and put and positive and negative lead to either connector. If the motor foes up one way reverse them to see if it goes down. If that's the case this bypass will work perfectly. Good luck!
I used Maxima 927 premix for a long time never had any issues. Now I use Motul in my big bikes but it's more expensive. I mixed 32:1 and had the oil injection deleted. I had to jet the carb and have a Hetrick pipe on it. That all plays a factor. Hope this helps. 👍
Where can I get those pro taper bars?
I actually got those with the R&D billet steering system as a set. It was one of the last systems West Side Powersports had in stock used. I wanted bars so they sent me the protaper bars that didn't work out on one of their spark builds, they were lightly used. They entire steering system bars and finger throttle with clip ran me right under 500.00 shipped. Best thing I did to the ski for controls. Look at protaper se bars online you should be able to find the same set. These are wider than normal but I'm 6'2 with long arms so they are perfect .
I can get you the exact ones for five finger discount 😂
Where did you get your digital speedometer from?
@@KelbyCheatwood I found it on Amazon , Eling digital gps. I believe it was the 52mm size and it fits right in there. I mounted the transponder in the hood for good reception. I bought a black one. Sponsored
Visit the Store, ELING
ELING
Visit the Store
4.4 343
ELING Warranted Digital GPS Speedometer Odometer Kit for Car Boat Motorcycle with Red Backlight 2'' 52mm 12V 24V







At least that's as close to what I remember. It's been some time since I messed with the GPS. It works well and you can just install and be worry free. I took the gamble and it worked great. Even plugged up to battery in my truck to Rd test and it's accurate. Hope this helps you out.
so do you have the actual vts motor in the box or no?
Yes it just bypasses the stick wiring if the motor works inside the box. Easy way to tell is disconnect factory wires at the box and put and positive and negative lead to either connector. If the motor foes up one way reverse them to see if it goes down. If that's the case this bypass will work perfectly. Good luck!
What oil and gas mix do you use for your kasea Skyhawks 50cc
I used Maxima 927 premix for a long time never had any issues. Now I use Motul in my big bikes but it's more expensive. I mixed 32:1 and had the oil injection deleted. I had to jet the carb and have a Hetrick pipe on it. That all plays a factor. Hope this helps. 👍
If you're ever interested in letting this ski go and you're on East coast let me know instagram is diertyeurospec