MY 6.0 POWERSTROKE IS RUINED
Vložit
- čas přidán 27. 03. 2024
- Huge thanks to PKP performance and more !
Discount codes and more below !
Discount codes :
HAWK25 for 25% off www.rigidindustries.com
HAWK5 for 5% off on www.blessedperformance.com
HAWK5 for 5% off on www.turbotimeusa.com
HAWK10 for 10% off on www.dbautolight.com
HAWK10 for 10% off your frame faceplates on www.jpfabandcustoms.com
Thanks to these awesome sponsors listed below!
@pmfsuspension
@grille_tech
@singleshotpowdercoating
@dba_lighting
@boraoffroad
@j.p_fab
@rigidindustries
@blackarmourbedmats
@azaautowheel_domestic
@bad_habits_custom_automotive
@fassfuelsystems
@powerstrokeproducts
@turbotimeusa
@blessed_performance
#borawheelspacers
#boraoffroad
#dbalighting
#grilletech
#rigidindustries
#turbotimeusa
#fueledbyfass
OTHER HELPFUL LINKS BELOW :
CHECKOUT MY AMAZON STORE!
www.amazon.com/shop/justinhaw...
LINK TO PRESSURE WASHER :
amzn.to/2WaYvGt
LINK TO EXTENSION CORD :
amzn.to/3zEJnyK
LINK TO FOAM CANNON :
amzn.to/3CMVZWv
LINK TO GREAT POLISH FOR ALUMINUM WHEELS & MORE :
amzn.to/39DdtrF
LINK TO GREAT STARTER CAR WASH KIT :
amzn.to/39HHOW4
LINK TO GOOD CHROME / ALUMINUM WHEEL CLEANER :
amzn.to/39EMdZV
LINK TO GOOD DETAILING BRUSH KIT :
amzn.to/3CO6Ijn
All of these links are affiliate links i am partnered with amazon affiliate program to make commission off these link sales. - Auta a dopravní prostředky
You should bring your truck to Dave auto center. It’s a big shop and reparable that’s good job.
If you want the peace of mind of knowing what you have, do it yourself. Trust No One.
If block didn’t need machined I’d definitley go for it. But I have a lot of faith in Herbie and not everyone can rebuild their motor themselves so this will also hopefully promote a trustworthy shop , along with provide me content for the viewers.
just pull it apart and rebuild it yourself.
I threw in a colt cam stg 2, kc stg 2 jetfire, Holder's 175/stk, full reseal and rebuild. arp stud, 6.4 push rod, lifters, and call it a day. they are not all that difficult tbh to rebuild. And that was done in a slope driveway. Running great until trans gave out at 300k. now trans rebuilt with billet tc, all new solenoid and HD clutch pack. Running all great now
2006 6.0 kc2, colt cam2, 175/stk Holder's, .030 oversize, ficm 40, mahle rebuild kit, fel pro headgasket, full emission, srl+
I would love for you to give it a shot at rebuilding it yourself.
If it wasn’t for pkp wanting to help and be a huge supporter of the channel I’d Definitley give it a shot. But the worry of this block being damaged , and stripped bolts etc. I’d rather just have him do it and know that it’s right with some sort of warranty and someone that stands behind their work. I trust Herbie & he has the job secured so we will just have to see. Thanks for watching !
@JUSTINHAWKSMITH Yeah man, sucks it went to the wrong hands. I've watch PKP before and hopefully they'll get yours running again for more 6.0 content
Sorry for your issue. I rebuilt my lb7 duramax myself and have no issue. Learn your engine watch building video and get a manual for reassembly. You will learn so much. You already learn a lot with all your videos but learn your engine and build it yourself
Definitely the slickest local truck I’ve seen
You should make a video of how the truck scene is not the same as it used to be because I feel it
Truck scene is like a strip club. Once the girls get played out they move to another joint.
Ehh maybe someday when I feel like dealing with the backlash spitting facts. Lol
You haven’t done it right if there is an extra bolts left over
A ever decided to do a different build Warren Diesel's got a video where they took a 6.4 motor block converted to make it a 6.0 with 2000 horsepower. Hybrid motor
I’d be calling an attorney for sure
Keep it going man good work
Thanks so much for watching!
Love this truck, I hate seeing it down like this.
you need to put compounds on it, way easier to spool, quieter, and if its big enough it wouldn't make crazy torque that would hurt longevity
Alright so I’ve got a question. Just bought a 6.0, an 05 model and had 140k miles and completely stock and took to a shop here in my town and had it bulletproofed and afterwards the truck ran horrible and it’s been 3 different things they told was wrong and paid to get fixed and they’ve had for 3 months now and just wondering what you recommend because you somewhat had the same problem I’m having right now.
Me personally , 3 months is far too long for ANY shop to keep a truck for a basic stud job. Unless you were warned ahead of time it would take 1 month + due to wait time or back logged work , that’s a huge red flag already that youre dealing with some people who procrastinate or don’t keep up with their work load like they should. Any shop who’s got their head on straight can usually do a head stud job in 1 business week. 2 business weeks is okay as well if parts , machine shop , etc take a little long. Hope this helps and good luck. I’d be going down there and getting some answers and money back & taking the truck else where personally.
You are more than capable of building the engine yourself, send the block and components to the machine shop, make sure everything is correct, and true. With your cylinder heads, take a digital caliper clamp on both ends of the heads and see if they are the same number to make sure they have been milled Even. You can do this. I just finished mine myself, and it fired right up and runs amazing. It’ll be great content for you/us and tons of videos worth for your channel.
I don’t disagree with you one bit but I have a lot on my plate right now it’s been hard just finding the time and motivation to even pull the motor much less fool with finding a machine shop locally to do a good job. If I’m gunna have to still put the job in someone else’s hands by having a machine shop deck the block , no good ones local to me that I know of. So that’s the turn off for me. So at the point in my life currently id rather hopefully be done good by Herbie at PKP motorsports and have a reliable engine by someone that knows what they’re doing. Pray for me !
@@JUSTINHAWKSMITH I understand the dilemma, rebuilding my engine, was a nightmare due to my machine shop person issue. It took me nearly a year to get mine up and running again due to all of the problems I had with the machine shop guy. I should have paid with a credit card so I can backpay his ass. Keep that in mind on the other hand, you could just buy a warranty engine from Asheville or kill devil and they will probably give you a great deal on itdue to your marketing and you can make payments on it. Best of luck.
What a nightmare! The fear of leaving your truck with a mechanic. Sorry for you bro.
Thanks for watching!
maaaan what a nightmare
Should I rebuild my motor or buy a new one with mods done already? (Lifter fail)
depends what your budget is
Get a oem ipr that one in the video is a standard brand it will leave you high and dry
Yessir it had a motorcraft one in it whenever it was dropped off. & was supposed to have had a new motorcraft one installed. Lol
Will it be cheaper just get another 60 motor then rebuild it
For someone in my situation without great companies to work with & advertise for yes I would recommend just getting a new 6.0 motor. Which is in term what I’m doing. But just to save some money PKP is going to use any parts off of this motor that are perfect he can. Thanks for watching!
@@JUSTINHAWKSMITH That's a problem where I live. I'm not a mechanic but I do all the work on my vehicles. That I'm able to do. Like my wife's vehicle took then just get the radiator system flush and they drill holes into the damn steel line. That weren't there when we took it. They said 350 fix it right now I said no. Took it home $60 fixed it myself.
Smh people like that suck , u cant just take your engine anywhere
Nothing is for free haha lessons cost money.....good ones lots....
That’s for sure !!
dee dah dee😂
first
Bro your so much money into the build and wasted time you would have been better buying a running show truck. Plus all the truck shows and content u could have made!
This hasn’t really costed me anything , made more off the videos than what I have in the engine build…. No fun in buying a truck already built. Not much on the show scene anymore it’s a joke.
first