Video není dostupné.
Omlouváme se.

Sick of these Temp changes.

Sdílet
Vložit
  • čas přidán 24. 05. 2024

Komentáře • 45

  • @CBersPond
    @CBersPond Před 2 měsíci +1

    Great video Craig 👍
    Welcome to the world of Thermotec ASHP ownership 👍
    Shout if you need anything and Phil's not around.
    Dave, Si and I all have them.
    Hope you're well.

    • @scrag68
      @scrag68  Před 2 měsíci +1

      Thanks Mate I've reached out to Si and Phil good to have others that can help thank you 🙏

  • @andrewjones7670
    @andrewjones7670 Před 2 měsíci +1

    Looking great 👌

  • @KoiEvents
    @KoiEvents Před 2 měsíci +1

    Good job scrap, fyi if memory serves there is 4 holes underneath for 4 pipes! Mine come with the pipes in the box

    • @scrag68
      @scrag68  Před 2 měsíci +1

      Thanks I got mine used and didn't come with any 👍

  • @jiffsterkoi
    @jiffsterkoi Před 2 měsíci +1

    Good job done mate nothing wrong with your pipe work you learnt from the master 😆
    Your fish are looking good especially the shiros 👍🏼👍🏼

    • @scrag68
      @scrag68  Před 2 měsíci +1

      Thanks Koi Mate he will always be the master I'm learning from the best @@telfordkoipond #mrpipe

  • @Sharpeyskoi
    @Sharpeyskoi Před 2 měsíci +1

    fish looking good mate

  • @TelfordKoiPond
    @TelfordKoiPond Před 2 měsíci +2

    Super job Craig, whole setup is outstanding 👏😊👍

  • @westbromkoi
    @westbromkoi Před 2 měsíci +1

    Just the job that is scrag, top job on the pipework too 👌🏼👍🏼. I've turned off my inline heater now and the temp swings are insane

    • @scrag68
      @scrag68  Před 2 měsíci +1

      Thanks Shag hope your OK mate 👍 🙏

    • @westbromkoi
      @westbromkoi Před 2 měsíci

      All good shag 👍🏼👌🏼

  • @edenkoipond
    @edenkoipond Před 2 měsíci +1

    Nice install scrag! Nice and tidy. Like you say, bit of a bum twitcher (mines wonky 😂) An investment you won’t regret 👍🏼

    • @scrag68
      @scrag68  Před 2 měsíci

      Thank You Shag 🙏

  • @HumberKoi
    @HumberKoi Před 2 měsíci +1

    Great update mate my pond is swing temps are doing my head in to great to see you putting content out mate, and your pond looks well all the best matey

  • @koicentralofficial
    @koicentralofficial Před 2 měsíci +1

    Fair play Craig, considering getting one myself. These temperature swings are really p***ing the koi off.

    • @scrag68
      @scrag68  Před 2 měsíci

      Nightmare Matt temps a up and down like a brasses draws. Hopefully this will cut some of the stress out. 👍🙏

  • @keepingitkoi
    @keepingitkoi Před 2 měsíci +1

    That will do the job nicely mate 😊👍

  • @BlackCountryKoi
    @BlackCountryKoi Před 2 měsíci +1

    Nothing wrong with that pipe work ar kid , Phil will be proud . Whats the Kw on the air source mate ? Looks the biz 👌🏻👍🏻👍🏻👍🏻👍🏻

    • @scrag68
      @scrag68  Před 2 měsíci

      Ar Bin Ya Me Mon, it's the 9kw shag. Thanks 🙏

  • @matproud44
    @matproud44 Před 2 měsíci +2

    I can honestly say ive never seen anything like you set up outside of a commercial operation! I lot of time love effort and money gone in there pal , you must be very proud it is amazing

    • @scrag68
      @scrag68  Před 2 měsíci

      Thank you always a boost when you get nice comments of appreciation 🙏

  • @adethekoikeeper6505
    @adethekoikeeper6505 Před 2 měsíci +1

    Looking good and that

  • @marekskoipond9083
    @marekskoipond9083 Před 2 měsíci

    Good choice on the thermotec, great bit if kit, crack open the bypass to get 2deg difference between inlet and outlet pipes 👍

  • @JamesTHEKOIwhisperer123
    @JamesTHEKOIwhisperer123 Před 2 měsíci +1

    Looking good mate now that’s the hammer 🔨 koi will definitely like the stable heat temps now and pipe work looks great mate

    • @scrag68
      @scrag68  Před 2 měsíci

      NOW THEN BOI, Thanks 🔨🐇🐰🐇

  • @matproud44
    @matproud44 Před 2 měsíci +1

    That a little roach in the grow pond? Lol

  • @mark5tytshort770
    @mark5tytshort770 Před 2 měsíci +1

    Well done, best thing I did ,I heat 13 degrees winter and 18 degrees summer, fish been no problem, good luck 👍

    • @scrag68
      @scrag68  Před 2 měsíci

      Thanks mate good to see what others are running 🙏

    • @mark5tytshort770
      @mark5tytshort770 Před 2 měsíci +1

      @scrag68 I bought mine for stability not hi temperature my fish I feed my fish till end of January then feed 2 to 3 weeks pearl barley manuka honey and garlic powder ,then stop feeding for 6 weeks then start feed slowly and lift temperature slowly.

  • @CescaTheDarkHorse
    @CescaTheDarkHorse Před 2 měsíci +1

    Nice one Scrag 👍 good choice of Air Source Heat Pump 🔥
    ⛩🐟⛩

  • @atsuminaoki9910
    @atsuminaoki9910 Před 2 měsíci +2

    7:25 KOI swimming and behaviour seems to be improving! I'm all for the idea of keeping the UK's water temperature, which is unstable at this time of year, as constant as in Japan.

  • @tonybarker428
    @tonybarker428 Před 2 měsíci

    Nice job there👍but the big question is…..what’s the Draco for???

    • @scrag68
      @scrag68  Před 2 měsíci

      Thanks Tony means a lot from a seasoned pro thanks. Nowt wrong with your eyesite 🤔🤣

  • @JohnBryan-yd8br
    @JohnBryan-yd8br Před 2 měsíci +1

    Hi there, what is the plant growing out of the shower ?

    • @scrag68
      @scrag68  Před 2 měsíci

      It's call Baby Tears or Mide Your Own Business 👍

  • @markscountrykoi
    @markscountrykoi Před 2 měsíci +1

    Fish are looking great scrag can’t go wrong with a heat source but don’t class the heat source pump cause it will district itcs working scrag