Wrapping doors and windows with coil stock. Part 1 The basics! Tips and tricks!
Vložit
- čas přidán 31. 07. 2022
- #cappingdooropenings #cappingwindows Today I am starting a mini series on capping doors and windows with aluminum. This will be a series of how to videos showing how to use the brake to bend aluminum to cap windows doors and make custom flashings of all kinds. Please leave a comment on what you would like to see me bend! learn the basics ! pro tips !
squi.jig?igshid...
squijig.com/
On the vertical sides we would have made it long enough to have a 2” tab at the top. Use it to nail the piece and eliminate some visible fasteners. Also I used to carry a couple scratch awls to start holes and temporarily tack the piece up to check the end fit before committing to nailing it home. The awls also make the nail hole slightly loose for stock expansion.
SUPER !! I just got my first lesson on wrapping wood. Thanks for the help you are a good teach offering great tips for a good finish.. Thanks so much for lesson.. Good Luck.
Jose R Garcia
GlD you enjoyed it! What would u like to see next?
Looks great
Very helpful, thank you for the video.
No ptoblem hope u enjoyed it!
Nice work Jamey
Thanks!
Thank you sir.
Hope it helped!
I’d like to see a video covering your technique of wrapping brick mold on a steel sided house. Wow. My first time last week, what a headache! Nice video. Thanks for sharing this.
Learning brake work takes time to master but so worth it!
Great video. Thanks. How do you account for doors/windows in old houses where edges aren't actually straight? I've got 18 window to cap in a 1890 house and there's not a right angle anywhere
Practice practice trial and error! Start from the bottom and work your way up!
Great video showing how to take measurements and use a brake. Thank you for sharing with the world! Quick question, why use a hammer and nail to secure the coil? Aren’t there powered nailers that can do that better without risking a hammer hitting new coil and mucking it up?
A hammer and trim nails work better for control.
All good other than running your knife off the end of your coil and into the aluminum hinge. I score three times from left to right and three times right to left never going off the end of the metal!
How do u do it?
@@Warren3carpentry I start at each end and work my way towards the center on my cuts. Dosnt cut up the hinges.
Fuking awesome
Be sure to subscribe for more videos like this!
HI, thanks for the video; super helpful! Apologies for the rookie question but is it ever possible to avoid using nails? Could some OSI or other exterior adhesive be applied to the backside to glue the pieces into place or will that not be a long-term reliable result?
We have almost alwas nailed. Sometimes u can hide the nails tho
I've worked in some shady neighbourhoods but never had to wear a bullet proof vest. Where is this filmed, Bagdad?
South Dakota! Rough area for sure!
. @@Warren3carpentry I'm from a sleepy town in Northern Ontario. In the summer we might get a roudy party now and again but thats the extent of our crime rate..
Is there a part 2? I’m hoping to do a door.
I have not made a part 2 unfortunately sorry!
I had someone replace my old wood windows with vinyl ones and then they did wraps around them. They did a horrible job. The wraps are uneven and the caulking looks like a 5 year old did it. They are refusing to fix it. What can I do? If there is a way I could send you photos let me know. Thank you so much.
What kind caulking they used? Some of them cheap, so you can’t do proper work. For caulking better Tremco or Dow, but expensive
If you got that brake for $200 that is amazing. I can't find a single cam lock style brake for less than $1000 used. The old Tapco windy special will have to do. Sucks that it cannot do a hem though so I have to beat it closed manually then crush it in the jaws.
Yep i have had it for over 20yrs made me a lot of money.
You said this is a 10’ door. If you were doing a 16’ door then have the option of the metal being 16’ without a seam but not the capability to bend it. So do you seam it?
It is a 16ft wide door my brake is 10ft long, I may have mispoke?
No you brake it in the center
Just make sure you make them a lil long for your over lap
I rewinded the video too many times and I still can't figure out what you called those little gadgets used to set the angle on your square. Squeegees??
Oh, I just noticed you have the link to it in the description. 👍🏼
I'm not able to find part 2 for walk in doors.
I actually didn't make a part 2. Life gets crazy sometimes! Sorry about that.
Not sure if you're aware, but when you're installing the pieces around the garage opening, the camera is way off and we can't really see the important parts.
Sorry about that!
Not bad for a carpenter lol
Thanks Had!
Now do the doors please.
Sorry this is an older video. Doing some doors soon though!
You're over cutting, hitting You're hinges. Stop short and cut the other direction. Saves wear and tear on your break. But nice job though.
Yep you are correct. This is a 20plus year old brake. Tume for a new one anyway
yep i have had my break for 36 years. old windy rookies almost cut through hinge doing that over the years.
You going to be replacing that rollers, you keep cutting them.
What do you mean? Please explain.
Hack attack 😂
Best job on youtube!
Another guy with a better method nowhere to be found😂
@@JT-rc7vx I appreciate the feedback and positive information!