How to Replace Bumper End 2007-2013 Chevrolet Silverado

Buy Now!
New Bumper End from 1AAuto.com 1aau.to/ib/1ABBR00270
This video shows you how to install a bumper end on your 2007-2013 Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• 10mm Socket 1aau.to/oaJ5/1AXAA00017
• 15mm Socket 1aau.to/oa2i/1AXAA00015
• 21mm Socket 1aau.to/oZH/1AXAA00043
• 7mm Socket 1aau.to/oaJ5/1AXAA00017
• Trim Tool Set 1aau.to/oTS/1AXXX00006
• Needle Nose Locking Pliers
• 1/2 Inch Ratchet 1aau.to/oZH/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oaJ5/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa2i/1AXAA00015
• Torque Wrench 1aau.to/oaj3/1AXAA00044
• Gloves 1aau.to/oxq/1AXSS00048
• Safety Glasses 1aau.to/orV/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.