How to Replace Performance Headlight Set 2007-2013 Chevrolet Silverado

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ib/1ALHP01665
This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2013 Chevrolet Silverado. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• 10mm Wrench 1aau.to/oKr/1AXAA00010
• 10mm Socket 1aau.to/oaJG/1AXAA00017
• 7mm Socket 1aau.to/oaJG/1AXAA00017
• Trim Tool Set 1aau.to/oTA/1AXXX00006
• 1/4 Inch Ratchet 1aau.to/oaJG/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oaZN/1AXAA00015
• Gloves 1aau.to/owT/1AXSS00048
• Safety Glasses 1aau.to/orv/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@cj23gallagher56]

From experience any aftermarket lights you get no matter if it says there sealed or not get yourself a tube of silicone and put a thin bead around the edges you will never notice but if you don’t there is a pretty good chance you will get water or condensation in them at some point even the expensive ones seem to do it

[@nickprater2785]

It would help to know what they look like on the truck.

[@Akestler]

My biggest grip with this video, is no beauty shots of the light on....

[@LuisMartinez-nq6kp]

For the low beam can you put an LED or do you have to use the one it comes with

[@khadimrasul73]

Do you have to replace the whole light if the led light strip doesn't light up anymore?

[@glytchy]

Does anyone actually have these? How's the light output and beam pattern?

[@viliamififita5208]

My LED strip won’t light up anymore?

[@loganpalin138]

Could I just put led lights in these