How to Replace Headlight Bulbs 07-13 Chevy Silverado
Vložit
- čas přidán 25. 08. 2024
- 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video applies to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
🔧 List of tools used:
• 10mm Socket 1aau.to/osW/1AX...
• 7mm Socket 1aau.to/osW/1AX...
• Trim Tool Set 1aau.to/oe5/1AX...
• Ratchet 1aau.to/oBI/1AX...
• Socket Extensions 1aau.to/owi/1AX...
• Rust Penetrant
For More Info visit us at 1aau.to/h/5T/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This video makes a 5 minute job insanely complicated for absolutely no reason. I perfectly replaced the driver's side bulb in my 2007 without removing any bolt or part other than the bulb itself.
Please explain how, there is no access to the the headlight bulb socket without pulling the housing back.
Chevy was all.. "look.. there's a nice set of headlight bulbs.. let's build a truck around them"
LMAO and it's on a CHEVY... notorious for bulbs wtf
Right!
You absolutely nailed it
Why didn’t u remove the whole cab?
Exactly!! :D
Lol. Exactly.
This made me laugh
I love the way GM makes life so easy for mechanics! This is the main reason I went to Fords years ago! Working on GM vehicles will really test your patience!
That's Ford good. Now you can work on your vehicle all the time!
@@bluebeachdesign I've never had any issues with my Ford's. Maybe you know idiots that rag on them or drive junk?
Thank you sir. 2nd time using your video. It’s kept my husband from ripping the grill off with his bare hands 😂😂😂
Terrific and helpful. Seems like a lot of work to replace a danged 💡, but really good job on the instruction. Thank you.
+Richard Downey Thank you for your feedback!
I replaced my drivers side low beam without doing any of this on my 2010 today. this video makes no sense to me.
Same here no need to take the whole head light out
I was able to reach my passenger side headlight from just removing part of the inner fender well to reach in. Just a FYI. A 10 mm and two 7 mm bolts and 2 push clips
Thank you for the suggestions and for watching! +bob Bunni
Seems like an awful lot of work when one can simply reach in next to the washer fluid reservoir (drivers side) without removing anything but the bulbs or for the passenger side remove the 4 screws for air filter cover, pop it off and you have the same access as you had on ghee drivers side. I wonder if this method, removing the grille and partially removing the inner fenders is what one would do when or if one is paid hourly....my way both sides under ten minutes and done
Thanks! Your video made it seem a lot less painful to do.
+SomeRenoGuy Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
This makes Chevy look bad. You're telling me I have to take my truck k apart just to change a lamp. This is supposed to be done on the run.
That is a crazy amount of work to replace bulbs lol....
I did both in. 20 mins passenger side remove airbox. Driver's side remove battery if it has the secondary.
That work truck is beat up! But the tires are in good shape.
+Todd S Thanks for checking us out. 1AAuto.com
You mean to tell me you couldn't reach around behind the light and take the bulb out? you had to take the whole front end apart to do that ? thats insane!
That’s a lot of work to move the bulb out. Theirs got to be an easier way.
Whata heck Chevy, whata heck!!!!.....Seriously????
1A Auto How much you guys charge to do this?
+Vicente Lopez We are an online retailer and do not provide the service but we do sell the headlights through our site!
Not at all right. You can replace all four bulbs with out any prob, no taring your truck apart.
I miss my 2005 🤦🏻♂️
Please dont really do this just to change a light bulb theres a much faster and easier way!!!
My 2010 with no extra battery on the Driver side took me 5 min total.
I guess I gotta look for another video that mentions a hi beam bulb size
You don't have to take all that off
I thought there was an easier way.
There wasn't... at least for the driver side.
Thanks for watching! +Luis Perez
omg
I can do it in 2minutes without taking off my grill
My god Chevy really screwed up the engineering on this model of truck.
Take off the grill to change a bulb? LMAO, this is ridiculous
I started following these directions,then realized all I needed to do was take off the cowling and remove the airfliter reach in and pull the bulb out on my 2013 Silverado. The drivers side I just have to move the windshield washer tankout of the way
on a 2500 the battery and trans ecm are in way