How to Replace Rear Wiper Arm 00-07 Toyota Highlander

Sdílet
Vložit
  • čas přidán 6. 03. 2018
  • 1A Auto shows you how to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper arm. This video is applicable to the 04 Toyota Highlander.
    🔧 List of tools used:
    • 10mm Socket 1aau.to/oxf/1AXAA00017
    • Windshield Wiper Puller
    • 3/4 Inch Socket
    • Ratchet 1aau.to/oHY/1AXAA00016
    • Rust Penetrant
    For More Info visit us at 1aau.to/h/agp/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Auta a dopravní prostředky

Komentáře • 20

  • @1AAuto
    @1AAuto  Před 3 lety +1

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @user-on2jp8qb7q
    @user-on2jp8qb7q Před 10 měsíci

    Great video! Just what I needed to see, use of the puller.

  • @j.b.9581
    @j.b.9581 Před 5 lety +1

    Thank you for showing how to remove the trim cover! Perfection; and Thumbs Up! The first 36 seconds were worth it!

    • @1AAuto
      @1AAuto  Před 5 lety

      +J. B. Thank you! We are happy we could help.

  • @devinamico525
    @devinamico525 Před 2 lety

    You do great repair videos. Thanks!

  • @jim8129
    @jim8129 Před 5 lety

    Thank you. This was a great video in that you showed the process from beginning to end. Very helpful!

    • @1AAuto
      @1AAuto  Před 5 lety

      +Jim Fred Thank you for your feedback!

  • @BingoXBoy
    @BingoXBoy Před 4 lety +2

    Is it possible to remove it with out the puller ??

  • @moisessanchez8439
    @moisessanchez8439 Před 5 lety

    Thank very much for the video, you help me a lot .😉

    • @1AAuto
      @1AAuto  Před 5 lety

      Thanks for checking us out. 1aauto.com +Moises Sanchez

  • @ronladuke7235
    @ronladuke7235 Před rokem

    You should have put some anti seize on those splines before reinstalling the wiper!

  • @dabeast1246
    @dabeast1246 Před 4 lety +1

    No antiseize or grease needed?

    • @1AAuto
      @1AAuto  Před 4 lety

      +DaBeast No this isn't needed. Thanks for watching.

  • @K_N_44
    @K_N_44 Před 5 lety +1

    Is it possible to remove it without using a puller if it is in the same condition like in this toyota?

  • @mamajo005
    @mamajo005 Před rokem

    Mine is stuck on really goon

  • @adamrapoza817
    @adamrapoza817 Před 3 lety

    Ya use that tool

  • @sardoggy
    @sardoggy Před 2 lety

    Great video but I just need a wiper arm puller for this one job. I don't want to have to buy the part for this one job. It would be a waste.

    • @1AAuto
      @1AAuto  Před 2 lety

      +sardoggy Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

    • @brycemorrison4540
      @brycemorrison4540 Před 2 lety

      You can get a free loaner tool from most auto parts stores.