How to Replace Rear Strut 2001-2007 Toyota Highlander
Vložit
- čas přidán 12. 04. 2022
- Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASTS01656
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2001-2007 Toyota Highlander.
This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oa/1AAST00002
• Locking Pliers 1aau.to/oa/1AXAA00139
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/oa/1AXAA00044
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
2000-2007 Toyota Highlander 1st Generation: • 2001-2007 Toyota Highl...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Axle nut removal not recommended or necessary. Lift the entire rear so the sway bar pulls both spindles down. Use a ratchet strap to pull/position each spindle downward and out of the way
In both the front and rear strut replacement videos, it looks like you're using a new sway bar. The link in the description goes to just the strut, not a new sway bar as well. Is a new sway bar needed? If so, which one did you use for both front and rear?
Looked pretty easy!
Hi thank you can i do this with a 2 ton floor jack for a 2003 highlander? Thanks
Will the process be the same for a 2011 Highlander?
Can you use a screwdriver if you don't a have punch to knock in the axle nut? Nice video
Oreilleys has some separators but if your thing is rusted in there. Have fun
What tools were used?
Is the process any different for a Hybrid?
I have the same question. Have you got an answer?
Is the part number for third row seat the same as without third row seat?
+@noahguymon6588 The part linked in the video is specifically for models without third row seating.
Alignment necessary after?
+asdsie ksefbo We do recommend getting an alignment after installing any suspension parts.
Can these be done like the front without loosening the axle nut?
Good question! My friend wants me to replace his on rear. I just did his fronts.
Chile I thought I was about to do this myself…😅😂
Their damn struts would not line I had to force them in. The studs on top. Poor quality. Don't buy cheap. Buy oem and save doing it yourself. Lifetime warranty is not even worth it. It's going to cost you more headaches and money if these fail a year or two and then have to replace them!
Son unos XX18LIKE.Uno de los mejoresv conciertos Mañas no 9 se l 💯💞😍