Fixing a Stuck Ford Super Duty Locking Hub - FOR FREE
Vložit
- čas přidán 20. 03. 2023
- When your Ford F250, F350, F450 or F550 hub gets stuck and will not lock or unlock because of corrosion, you can fix it yourself for free.
- Auta a dopravní prostředky
Thank you. Great break down and explanation. Just wish I saw this in the summer and not in the snowy winter. Things always break in the winter.
Yea for sure. Winter is when you find out the hubs don't work right. LOL
Thank you very much!! I learned a lot. Instant subscriber. Appreciate how well you explain things
Thanks for the comment.
Good information 👍
All the manual hubs I have had. Turn them each time you think of it. They will last, but run for months without using them. They stick. But still like manual hubs for sure. Or better let Manual with auto lockers also.
Thank you for the detailed video. Never would have thought about the nail trick. Will be trying this. Do you think adding a wedge, where the plastic clips that broke before separating could help prevent the plastic tabs breaking?
👍👍👍👍 thank you for this video it means a lot
Glad it's helpful for you.
Very good
Clicking noise while turning wheel while barely moving or sitting still. Think it's the hubs? Can't seem to come up with another explanation. Coming from the wheel area.
Thanks for the vid.
If you spray some fluid film in between the handle and the outside edge between the plastic and the metal while the hubs are still on the truck and then turn it. That will loosen those up to where they're functional again. You don't have to work at it. Just spray it right on the surface it will find its way in and just turn it back and forth a few times. You might need a wrench or pliers the first time.
Mine wouldn't free up that way. Tried it.
I appreciate your due diligence but I would never put those back in my truck. Upgrade to the warn, in the end of the day they are cheaper and they are reliable. Totally worth loosing auto lock.
My auto knob inside the cab isn’t working. Found out last week when I needed it. Had to jump out and manually turn hub.
Is it most likely the vacuum seal on the hub that had failed (leaks) ??
If so, is new hubs the way to fix it?
Sometimes it's the vacuum or just a couple O-rings. I found that my hub is actually sticky and cleaning it fixed my problem
Have a question how do you get the splines out if the lock out comes out and the splines don't
Oh boy. Penetrating oil and get an O-ring pick. You can slide that down in there and grab that part and pull it out
Thanks for the information well appreciated
$300 each in Canada. Ouch.
what year model truck is in the video?
2018 Ford F250 with the 6.7 diesel
Does this work on 7.3 hubs too?
Yes but you can fully disassemble the 7.3 hubs and do a better cleaning job.
So I have a 2015, I tried removing it exactly like you did but the clips did not hold on so the cap just came off and the bearing side is still stuck. Any idea on how to get it out?
@@vinnyz3482 no. Sounds like something is broke. Might be time for new hubs
You mentioned having a 7.3 powerstroke. Same here 2002 dually... Do u have a video on the lock/Autolock hub? I keep getting conflicting opiniins and dont know where the truth rests. When I select the wheelhub dial to autolock......and dash selector knob in 2wd.. my front axles rotate while driving. 1 garage said that is the way its supposed to be..... the other garage says that is not normal.....🤯🤯🤯🤯.....any wisdom to offer......beyond frustrated
No video but the hub should not be locked in in 2wd when in auto. That's 100 % true. It should free wheel in 2wd.
@@TravelinTim does the phrase free wheeling mean that the knuckle/axle stays still/not rotate when the wheel is rotating?
Sam here, ford excursion, Thanks
Darn Plastic Parts.