Ford F150 Blower Motor Malfunction Easy Fix
Vložit
- čas přidán 23. 12. 2021
- How I diagnosed and repaired a malfunctioning blower motor on my 2010 F150. might work for other years
www.fordgenuineautoparts.com/...
www.autooneled.com/?ref=900yX...
use code below for 15% discount on bulbs
Majorweakness - Auta a dopravní prostředky
Blower suddenly stopped working on my 2010 F-150. I spent about a half hour checking fuses and after striking out, I went to youtube and this was the first video I watched for this issue. I went out and swapped the two relays like you did and my blower works now. Don't know what I'd do without folks like you. Thanks a million!
Glad to be of help
Just bought a 2011 a week ago....and this happens this morning. Took a little digging to find this video, but I'm so glad I did. Saved me a ton of time and money.
Glad it helped
Thank you so much for posting this you save me a whole bunch of headache!!
Glad it helped
Thank you so much. Exactly my problem and your fix was exactly my solution. Thanks for taking the time to post it.
Glad it helped
Thanks buddy you just save me purchasing a new blower! Not to mention the guy at the local Ford parts desk just told me it would take 12 hours to change the blower motor. I think he was thinking of the Fresh air door replacement. Thanks!
Glad it helped. 12 hrs for a blower motor is definitely excessive
Man o man thanks to you tube, people are Saving lots of money. My blower just stopped last week working, out of curiosity I went to Ford and asked them how much and how long it would take and they told me anywhere from $500 to $1000 bucks. The only reason I did not leave my truck with them , they told me they were behind on work. I said le me look on you tube. Voila!! Got I fix for less than $50 bucks after watching some videos on you tube.
Glad it helped!
This saved me tons of time and headache. I thank you
Glad it helped!
Fixed my problem on my 2014 ecoboost, and was same relay. Thanks for the post.
Glad it helped
Was yours going out every now and again? It just not working at all
@@kennysoldan5789 it just suddenly stopped one day
That was it. But I have had so many instances in the past where things would go wrong and I would check the fuse or relay, and they would be good. And I would have to replace the part, ie fuel pump. So I didn't even bother to look at the relay, until I happened to see your video. But other videos I saw, suggested checking the blower fan itself or another part located near the blower. (Guess they figured most folks would automatcally check fuses first) Thank you for reminding to check the simple things first
I learned the hard way...check the simple things first!
This worked on my 2014 Ford F-150. Thanks!
Glad it helped
I go to the salvage yard for my relays, free. Great video, thanks bro!
Men you are a blessing for me
God bless you
I fix it
Glad it helped
It worked for me today 10-5-23.Was thinking my motor was bad but this was it.Thanks
Glad it helped
Thank you mine just went out and this helped!
Glad it helped
Save my day today thank you 🙏
Glad it helped
Worked for me. Thanks.
Awesome
That’s looks amazing
Nice tool box!
Thanks
Nicely done Major.$18 for a relay seems a little stiff to me.You might could try your local salvage yard and grab a handful for that price.Merry Christmas my friend.....
Merry Christmas to you as well! You are right about the salvage yard, just none within an hour of me. It would have been worth the drive as I believe they only charge 2.00 per relay
Honestly my scrap yards around here are about the same price. They upcharge like crazy especially within the last 2 years
Best idea of the day. Grab a resistor or 2 while at it.
I have a 2009 ford 150 platinum and my blower is not stuck and runs with heat and Ac. But the way it runs it dims the lights on and off with the speed of the fan running. Almost like a heavy load on a circuit and your lights dim a bit and then full on and then dims a bit and back on full. That's what my fan blower sounds like and does. Is that part of the same issue for me or is there something else that is part of the blower ? Thanks. Great video by the way too.
Sounds like your blower motor is going bad and pulling, too .many amps but should be brought to a shop to confirm
@@MajorWeakness thank you for the fast reply. Much appreciated. I will have it checked. Probably best to change both anyway. Motor blower and sensor. If that is the case then the motor should be putting lots of stress on the sensor part heating it up. If the shop finds its the motor blower I will change the other part too. Matter as well do both . Thank you very much. It helped a lot clearafying things in a better view point. Have a wonderful day Sir.
When swapped 3 with 4 it appeared that you left the bad relay in position 4. Was that the cause 😅of the rear window defrost not working? So easy to make that mistake mistake.
Yes you are correct. I eventually had all good relays. Everything still works as it should
Good thinking it worked but when I switched back the old one started working again. I’m buying 2 new ones for backup regardless
Glad it worked
So I swapped relays and it seems to be working now as long as I don't turn it to 4 "high". If I do that, the air begins to shut down again. Any idea why?
Sounds like a bad speed resister. Most auto parts stores sell them
did the same thing ? swapped out relays still didnt work so i checked fuse #51 swapped that ?still not working checked power at fuse plug in ? there is power on 1 side but still no blower fan and no power at wire plug in at resistor ? any ideas ? maybe button switch on dash ? cause it would nt be blower motor cause no power at plug in on resistor ?
I would check power at switch next
i just found another thing to check first ? is the climate control fuse thats in the fuse box thats inside cab #10 mini fuse ? let you know @@MajorWeakness
My 2011 blower just stop working on low and medium. Will that fix my problem
Probably not. Your symptoms point to a bad blower motor resister. These are simple to change and available at any local auto parts store
Changed blower motor and relay...will work for a bit then won't for a bit then will afain...any thoughts?
Check all your ground cables around the relay box. Sound like there is a wiring issue. Look for any evidence of chewing damage by small rodents. They love to chew on wires.
Could it be she same issue with the fans not cutting off
Yes. Just swap a few around and see if it fixes. You can get these relays at a junkyard for less than 5.00 each
My heater works on everything except hi
Any idea would help
Check your blower motor resister
My 06 blower motor resistor went out little over a year ago so I ordered one on Amazon had good reviews it worked for a year and when it did burn out it would only work on setting three and four that burned out couple months ago I got that company to send me a new one now this one’s only last about a month or two and it only works on setting for now not even three anymore now I’m getting real irritated and trying to figure out what the problem is you’re going to watch your video and see if I figure anything out
Make sure you do not have any water licking in there.On your blower motor resistor it will make it fail premature
@@MajorWeakness the is for tip
I got a 2008 mustang for the likes of me can’t fiquire it out. I swapped relays I changed the resistor.. you can run and wire to the blower motor to a battery it works fine. But no power going to blower motor
Switch??
@@MajorWeakness that’s the only thing I haven’t tried. But you can hear the ac compressor come on with the switch but doesn’t blow through vents. But I guess it could be messed up on the fan side of it. I really appreciate you responding back buddy
@@davidbryant5875 I would work my way back from the resister. Put a power meter on the resister and see when you change the switch does the output voltage change or does it even have an input voltage. If it doesnt have an input voltage then keep working back towards the switch. Might just be a connector that came loose
Hmmm, Mine stays on continuously on one speed. I replaced the resistor, didnt fix the problem- 🤔
Very strange
@@MajorWeakness It is- not really sure where to go from there. Ive changed the blower relay,,I guess today Ill try fuses, but fuses don’t make sense to me since the blower fan runs, In fact I put a new blower fan on it about two years ago. Might be the switch itself, if so it looks like Ill have to replace the entire face plate.
Did you ever solve this? I’ve replaced everything. Still stuck on high
@@Collin.strachan yes I did, I ended up replacing the blower motor, the resistor, and the wiring harness.
Didn’t work what’s the next step ?
possibly the blower motor resister. But check fuses first
@@MajorWeaknessthanks!
It didn’t work on my 2011
Sorry the video didn't help
I changed out my relay a few weeks ago and then I heard a clunk. My theory is that the fuse blows before the motor is about to give out. I have to get a new blower meter
Didn’t work for me 😢
Sorry hope you figure it out
hell my blower want cut off
Try swapping the relays
3:48
Relay #3
changes resister already 😊