How to Replace Blower Motor 2009-2014 Ford F-150
Vložit
- čas přidán 6. 09. 2024
- Buy Now!
New HVAC Blower Motor Assembly from 1AAuto.com 1aau.to/ib/1AHC...
This video shows you how to install a new TRQ blower motor in your 2009-2014 Ford F-150. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
Tools you will need:
• 8mm Wrench 1aau.to/ohU/1AX...
• 8mm Socket 1aau.to/obaW/1A...
• Ratchet 1aau.to/obAW/1A...
• Socket Extensions 1aau.to/obuV/1A...
• Swivel
• Gloves 1aau.to/o7g/1AX...
• Safety Glasses 1aau.to/oYt/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You don't point out whether or not we need to remove the glove box or is it under the dash.
Great video helped me swap mine out in about 30 minutes and I saved $400.
Watching you struggle to take it out was the best part, lol. Thanks though, it helped me find my blower motor and replace it. I also struggled pulling it out and I don't even have carpet!
Brother no matter what pled5 says. You ROCK. thanks for the video
thank you so much for this video! you just saved me $520! I went to the garage to get it replaced and they were going to charge me $600!!!! I saw your video, found the blower motor that I needed and just finished replacing it. Took me all of about 20 minutes. The hardest part was the stupid 8mm screw in the back! I tried using every 8mm socket I had but nothing worked. Ended up having to go spend $30 to buy an 8mm wrench thingy haha
Thanks for this video! My local Ford dealership was going to charge me $1000.00 CDN to replace this. I found a replacement part off Amazon for $80 and it took me about 20 minutes to change it!
Thanks so much! Great video! It took me about 30 mins. Hardest part is fumbling with the carpet and foam below.
Thankx for the instructions, it went out yesterday the hottest day of the year! but already had one in the back just waiting on this so wish me luck!!
Video was perfect, no need to remove glove box, I did not remove carpet, great
Why is the old blower so clean?
do you know the part numbers for the cables which that you disconnected from the blower? My connector is burnt and i need to replace but i amm unable to find what that part number is.
Where is it located though?
Can u show us how to install cruise control to a 2009 f150 4.6 3v 8vin . And have a truck at 175k miles and haven’t done the transmission oil but always do regular engine oil change .
When to replace and half of the blower motor fins were gone where are they???
Thanks CHRIS FIX!!!
That was the sloppiest removal I've seen in a tutorial video...😂
What size socket?
Thanks! Easy, just as you showed it to be. Much appreciated..
Because he didn't push the carpet out of the way in the first place
If it's underneath the glove box why do you have to remove the carpet. This video doesn't explain why
Now the blower motor will slide right out.....lol.
8 mm
You can pull the blower motor right out.
“2 hours later”
No way it’s this easy lmao I just did it in about 5 mins 😂