Hey lehew, you are the bomb !!!! I had an appointment this morning for an inspection sticker and my A/C blower to work. I knew it worked on and off. So being 63 years old and not used to this all electronic stuff. Back in the day if I wanted to fix my blower motor I just can't find the wiring fuse in a heartbeat but not today. So talking to my son like I do every week I told him about it and he told me to go on you tube and might find something about it. You were the second choice first one sucked. When I clicked on you it was clear and to the point. I followed everything you said and the last thing honestly the last thing on your video the blower started working. So people should always watch to the end. You probably just saved me money that is tight for me. Sorry for being so long winded but you made me a follower for you.. Thanks for being the real deal. !!!!!
your the best tutorial ever. 50% talk while 50% work. not unlike other who keep on talking non sense and crap. keep doing what you doing, more power to you. I will send your video to all that I know.
Awesome...I had replaced the resistor first, then the wiring harness. My next thought was blower replacement until I found this. My relay was loose.....thanks a million..
Your video helped me avert a crisis this morning. 20 degrees out and the blower motor stopped working. Checked all the fuses , switched them around and nothing. Then just wiggled the wiring going to the blower motor on the passenger side and off it went!! The cold here does some crazy things to pipes and wires etc... Thanks again!!
Great information. Clear and concise. I followed the steps and gave the blower motor a good whack. Viola, it worked. Obviously, the blower motor is going. At least I know what to replace. Thanks.
Thank you for this video and explanation of the fuses and relay locations! I had been trying to figure out why my blower would not turn on and turns out it was the 40 amp fuse! New fuse in and I am good as new!
Thanks for the info, i just pulled out the relay and all 3 fuses and made sure they were back in and secured. Magic now the blower works, didnt even have to change anything!!
My brother-in-law was over from Louisiana to help move my daughter. I live in Baytown Texas, and it is still warm here! While in the process of towing a U-Haul trailer from Baytown to Pasadena the AC in his F150 just stopped working like the switch was turned off. When we got back to Baytown we started troubleshooting trying to find a solution. He watched some videos on CZcams but we couldn’t find the answer. However, I found your video and bingo!!!! The culprit was a loose connection under the dash!!!! Thanks much for this video!!!! Kept him from having to drive 4 hours back home WITHOUT AC!!!!!!!
I got to say you did an absolutely fantastic job of explaining your points you also did not go into a call video about you know life history and and people down the street and yada yada yada you did an absolutely fantastic job and I got to tell you one of the few one of the few people that make videos on CZcams for something like this that get to the point 2 minute times guys or girls try to do that make a video and you lose the point because there's so much noise with everything else you know so anyway thank you very much I'm actually having that problem with my blower motors 2013. Once again thank you very much
Man if you are ever in So Cal hit me up because I owe you a pitcher of beer!!. So happy I came across your video, there were others with "fix it solutions" but your video was the best thought out!. I went through all your steps and turns out hitting the bottom of the blower fan man it start again. Yes, I need a new blower fan soon but at least I have AC and heat again. Thanks again for posting this video!!
I checked all the fuses. No good. As soon as I went to remove the blower motor cover that you show at the end, fan kicked on immediately lol. Thanks for the help
Great informational video, I'll check right now. I hope something here will stop the blower motor "DOOR" from constantly banging just before blowing something out . . .
Thanks! Checked the relay, all the fuses, and the connections to the motor. After doing that it kicked right on. Something must have been a little loose.
Great information looking to change all fuses tbh but if my issue isn’t fixed what could it be? And full speed blower sounds good but only blows like if it was at half speed setting and on the low speed setting little to no air comes out, also installed a new compressor and ac isn’t blowing ice colds still? Could it be a condenser? Or how do you know for sure if I have a bad evaporator which I hope I don’t, Heater works great tho
Thanks bro. My blower doesn't seem to be blowing like/when it's supposed to. For a while it was blowing when I didn't have the A/C or heat on... it stayed on all the time. Now I can even tell if it's on and I don't even feel moving air.
excellent video , maybe next video you could show us checking the resistor and homing the motor wiring , but I do appreciate the quality of what you produced
I have a 2013 Ford F-150 and I changed the blower motor but I’m still having trouble . Every time I hit a bump or a pot hole the air starts to work ? Any ideas what it might be ?
Thanks for this straight and to the point video without ridiculous music and 22 minutes of needless opining on camera to explain 5 minutes worth of actual useful information. My '13 Lariat starting having an issue where by when starting the truck in the morning the console switch for turning on the AC will illuminate as normal but there is no blower motor activation. After about 5 minutes (or more) the blower will turn on. It has been unusually humid in my area of the country (consistently 75-85%) for the past couple of weeks which may or may not have anything to do with the issue. But, my thought was the humidity might be causing a (possibly) failing relay, switch, connection, etc to have issues. My hope is one (or all) of the items in your video remedy the situation. Also, have you ever heard of or witnessed this generation F150 having the 'service advancetrac' and 'check brakes' indicators come on when the truck is at idle for 5-10 minutes with AC running on very humid days? Almost as if condensation is forming and getting into a harness or other area causing a short? I have had this issue for years and it *only* happens when it is particularly humid outside with maximum condensation. This never - not even once- happens on low humidity days (i.e. in cooler dryer weather this issue is unrepeatable - has to be humid out.)
Hi the blower motor is changing speeds on its own, and randomly works off and on. Do think it could be the resistor going out? It seems to work ok for the first 10 minutes; then starts acting up.
I checked the relay, fuses, fan, wiring harness but my blower won't adjust fan speed. It's just stuck in a mid-speed and occasionally goes high speed then goes back down to mid-speed. Any suggestions?
What causes the blower motor in a Ford only to work in one or two positions of speed I lost number one number two and now number three and now only number four speed works
my 2013 F150 Lariat Ac does not come on when pressing buttons. after a while it finally comes on and gets cold. I took it to the dealer and a relay was replaced. it worked for one day and is back to not coming on when controls are set to cool. the dash lights up but no airflow. What do you think?
Dear thanks for the good information my Ford f150 2012 5.0 the dashboard is dead the radio fan and evrythink is working good buy my speedmeter dashboard is all dead out of nothing do you know what the problem is
I went to remove the fuse by the front right kick panel. Truck was running. I just touched the panel covering the blower motor and it came on. Bad connection at the blower motor wire. Thank you for an easy fix!!
AC blower doesn’t blow hard on max AC when adjusted. All levels work accordingly but when I push Max AC the blower speed doesn’t not change. Stays stuck on regular speed
I replaced my blower motor resistor. It was only working on 4. It works on all settings now. What it is doing now is, it runs for 20 seconds and dies down to nothing.
Soo why would my blower motor stop working after about a min running it on anything higher than power level 1? Already changed the resistor today to no avail im stuck please help
Man, I got a 2013 5.0 eco boost. My blower motor and heat was on but was in able to turn them off , being a work truck the wire harness going into the resistor got kicked and exposed wires. The blower quit working and with it being winter and rushing it got shoved at and twisted and ended up popping back on. Last WK it got kicked again and wouldn't come back on. I realized that the resistor plug was melted a bit. I went and bought a new resistor, installed and no fan... The lights on the control panel is on but no fan when I twist the knobs. I then buy a new heater motor, install and still no heat. I checked all fuses, checked the relay you showed but the fan won't blow!!! Help man, so desperate. I spent 105 on the wrong resistor.. got a duel zone... Went and bought the none duel zone because I couldn't return the first one. So I'm out $210 then the new motor for 154.00 it's my work truck and I need to sort it out. Any advice my guy??
I am so frustrated. I replaced all relay fuses and my fans are still blowing in 30 degrees after start up. I have also replaced the A/C blower motor resistor located under the glove box. Fans are still engaging at start up. In addition to that after replacing the blower motor resister my heat and AC come on with out being turned on and will not shut off! any advise other than to sale it?
So I put a new relay in. And same result no motor but if I jump the terminal and bypass the relay it works. New blower motor, New resistor, all fuses are good. 40, 10 and 5.
My power steering went out and it’s a billion dollars for the parts and labor etc. you just confirmed that the blower motor which is also not working anymore as of late shares the same fuse and the power steering. Maybe replacing that fuse could be the resolve. Fingers crossed. Thanks
Hey lehew, you are the bomb !!!! I had an appointment this morning for an inspection sticker and my A/C blower to work. I knew it worked on and off. So being 63 years old and not used to this all electronic stuff. Back in the day if I wanted to fix my blower motor I just can't find the wiring fuse in a heartbeat but not today. So talking to my son like I do every week I told him about it and he told me to go on you tube and might find something about it. You were the second choice first one sucked. When I clicked on you it was clear and to the point. I followed everything you said and the last thing honestly the last thing on your video the blower started working. So people should always watch to the end. You probably just saved me money that is tight for me. Sorry for being so long winded but you made me a follower for you.. Thanks for being the real deal. !!!!!
Just saved$$$ by your fixes for my 2012 f 150 ac fan not blowing air. It was the relay. Thanks alot! 67 yr old lady me did it.
your the best tutorial ever. 50% talk while 50% work. not unlike other who keep on talking non sense and crap. keep doing what you doing, more power to you. I will send your video to all that I know.
That was exactly my point with my comment earlier. I think you did such a fantastic job of getting to the point and just getting it done
straight to the point! I wish all DIY videos were like this one! Thank you
Awesome...I had replaced the resistor first, then the wiring harness. My next thought was blower replacement until I found this. My relay was loose.....thanks a million..
Thank you brother! Checked everything and the connection was loose on the blower. Appreciate it! 👍
Thanks man just got my work truck ac working again I live in fl and we can't go without that lol thank you again
Wow. Clean, clear and no fat. Got lots out of that 4 minutes. Thank You!
Just tapped the motor with a pair of needle nose pliers and its working...for now thanks for the video
Your video helped me avert a crisis this morning. 20 degrees out and the blower motor stopped working. Checked all the fuses , switched them around and nothing. Then just wiggled the wiring going to the blower motor on the passenger side and off it went!! The cold here does some crazy things to pipes and wires etc... Thanks again!!
Man this was straight to the point. You’ve earned my subscription
Thank you I was able to fix my A/C watching your video
Just swapped my relay out and blower is now working. Thank you!!
Great information. Clear and concise. I followed the steps and gave the blower motor a good whack. Viola, it worked. Obviously, the blower motor is going. At least I know what to replace.
Thanks.
How long did it keep working after you tapped it?
Perfect! Changed out the resistor and nothing
Tapped on the blower motor connection and Bam!!! Everything works and now all the spores
Thanks
Thank you you really helped me out, my a/c wasn't working and I tap the bottom of the blower motor. Thumbs up bro. For informational thanks
Thanks. Very helpful vid. Wife came back from town and said the fan is not blowing air out.
Thank you for this video and explanation of the fuses and relay locations! I had been trying to figure out why my blower would not turn on and turns out it was the 40 amp fuse! New fuse in and I am good as new!
Thanks for the info, i just pulled out the relay and all 3 fuses and made sure they were back in and secured. Magic now the blower works, didnt even have to change anything!!
My brother-in-law was over from Louisiana to help move my daughter. I live in Baytown Texas, and it is still warm here! While in the process of towing a U-Haul trailer from Baytown to Pasadena the AC in his F150 just stopped working like the switch was turned off. When we got back to Baytown we started troubleshooting trying to find a solution. He watched some videos on CZcams but we couldn’t find the answer. However, I found your video and bingo!!!! The culprit was a loose connection under the dash!!!! Thanks much for this video!!!! Kept him from having to drive 4 hours back home WITHOUT AC!!!!!!!
Great video. My blower stopped working, I removed the 10amp fuse stuck it back in and it started working!
Tapped on the blower motor and it started working! Thanks!
That wiggle wiggle did it 🎉🎉🫡🫡🫡
Great video bud thanks for the help! All I needed to do was unplug the blower and plug it back in
Was the relay for me.. Gave it a tap and away it went.. Thanks a million, you got me out of a real jam...
The last thing you suggested worked! Wiggle the plug/ tap the blower motor! Thanks so much for the video!
Great tip I smacked that motor to get it to stop running hooked the battery back up and BAM it worked Thanks a bunch
You saved me hundreds of dollars! Thank you!
Thanks I swapped out the relay and the 40a fuse under the hood and replaced the resistor that solved my no blow issue
Very helpful. It was my fuse inside the truck
Thank you took the inside panel off too check fuses and tapped the blower motor and it started right up.
Excellent video. Thank you
thanks friend thanks for your video I was able to fix my air conditioning
Thanks for the video. Blower motor connector was my issue. 100 in Oklahoma.
Thank you for taking the time to share your knowledge. I appreciate your efforts. Take care.
Straight to the point. You get a subscriber for that
Guys like you are heroes of the internet
Dude i love you , its 105 today and my ac wouldnt work out of no where i moved the blower fuse and it worked
Thank you , tapped on the blower motor
And it kicked on, now gonna look up how to change it!
I got to say you did an absolutely fantastic job of explaining your points you also did not go into a call video about you know life history and and people down the street and yada yada yada you did an absolutely fantastic job and I got to tell you one of the few one of the few people that make videos on CZcams for something like this that get to the point 2 minute times guys or girls try to do that make a video and you lose the point because there's so much noise with everything else you know so anyway thank you very much I'm actually having that problem with my blower motors 2013. Once again thank you very much
Perfect info very informative. Started working after i gave the motor a good whack!
Awesome video bro. Very well explained. Thank you
Fantastic video sir keep up the good work
Man if you are ever in So Cal hit me up because I owe you a pitcher of beer!!. So happy I came across your video, there were others with "fix it solutions" but your video was the best thought out!.
I went through all your steps and turns out hitting the bottom of the blower fan man it start again. Yes, I need a new blower fan soon but at least I have AC and heat again.
Thanks again for posting this video!!
Great video. Connectors on the plug were burnt up. Thanks for the help
Worked for me. Thanks for the vid!
I just wanted to say that tapping something to make it work finnally worked for me for once.
I checked all the fuses. No good. As soon as I went to remove the blower motor cover that you show at the end, fan kicked on immediately lol. Thanks for the help
Great informational video, I'll check right now. I hope something here will stop the blower motor "DOOR" from constantly banging just before blowing something out . . .
Good job sir u input got me going 👍
Thanks dude! Great video!
Thanks for the video I’m fixing my blower thank you video
Thanks! Checked the relay, all the fuses, and the connections to the motor. After doing that it kicked right on. Something must have been a little loose.
Just what I needed. Thanks
Awesome video, helped tremendously, thanks, problem solved 😀 👍
Great information looking to change all fuses tbh but if my issue isn’t fixed what could it be? And full speed blower sounds good but only blows like if it was at half speed setting and on the low speed setting little to no air comes out, also installed a new compressor and ac isn’t blowing ice colds still? Could it be a condenser? Or how do you know for sure if I have a bad evaporator which I hope I don’t, Heater works great tho
Any idea why fuse 51 (green fuse 40amp) would blow? Can't seem to find anything regarding this or a reason... the number 3 fuse was fine.
Thanks bro. My blower doesn't seem to be blowing like/when it's supposed to. For a while it was blowing when I didn't have the A/C or heat on... it stayed on all the time. Now I can even tell if it's on and I don't even feel moving air.
Your amazing and nice multi tool
So I tapped on the blower motor and got it to work so does that mean I gotta change the blower motor
excellent video , maybe next video you could show us checking the resistor and homing the motor wiring , but I do appreciate the quality of what you produced
So if I tapped on the blower motor and it started up, does that mean it needs replaced due to something internal?
I have a 2013 Ford F-150 and I changed the blower motor but I’m still having trouble . Every time I hit a bump or a pot hole the air starts to work ? Any ideas what it might be ?
Thanks for this straight and to the point video without ridiculous music and 22 minutes of needless opining on camera to explain 5 minutes worth of actual useful information. My '13 Lariat starting having an issue where by when starting the truck in the morning the console switch for turning on the AC will illuminate as normal but there is no blower motor activation. After about 5 minutes (or more) the blower will turn on.
It has been unusually humid in my area of the country (consistently 75-85%) for the past couple of weeks which may or may not have anything to do with the issue. But, my thought was the humidity might be causing a (possibly) failing relay, switch, connection, etc to have issues. My hope is one (or all) of the items in your video remedy the situation.
Also, have you ever heard of or witnessed this generation F150 having the 'service advancetrac' and 'check brakes' indicators come on when the truck is at idle for 5-10 minutes with AC running on very humid days? Almost as if condensation is forming and getting into a harness or other area causing a short? I have had this issue for years and it *only* happens when it is particularly humid outside with maximum condensation. This never - not even once- happens on low humidity days (i.e. in cooler dryer weather this issue is unrepeatable - has to be humid out.)
Hi the blower motor is changing speeds on its own, and randomly works off and on. Do think it could be the resistor going out?
It seems to work ok for the first 10 minutes; then starts acting up.
Thanks for getting right to the point great explanation you def know 6oure stuff
What would make the resistor keep freezing open?
Thanks, mine just stopped working, I'm going to use these troubleshooting tips
Does the blower motor resistor have a fuse?
Great video thanks
I checked the relay, fuses, fan, wiring harness but my blower won't adjust fan speed. It's just stuck in a mid-speed and occasionally goes high speed then goes back down to mid-speed. Any suggestions?
Is this the same way on the 2012
I tapped on the blower motor and the AC immediately came back on. Does that mean I need to replace the whole motor?
Thank u from saudi arabia for good informarion 🙂
Stay cool 😎
What causes the blower motor in a Ford only to work in one or two positions of speed I lost number one number two and now number three and now only number four speed works
Wow your good. Its nice that you point it out. And kinda pause right away that i can screen shot
my 2013 F150 Lariat Ac does not come on when pressing buttons. after a while it finally comes on and gets cold. I took it to the dealer and a relay was replaced. it worked for one day and is back to not coming on when controls are set to cool. the dash lights up but no airflow. What do you think?
My blower motor works only on max setting (4) but not on 1, 2, or 3. I replaced the motor resistor but still didn’t fix it. Any idea???
You are kick ass! Thank you!
Good information. Thanks.
You are the man thanks
this highlighted the one fuse i hadn't checked. Thank you!
Dear thanks for the good information my Ford f150 2012 5.0 the dashboard is dead the radio fan and evrythink is working good buy my speedmeter dashboard is all dead out of nothing do you know what the problem is
I went to remove the fuse by the front right kick panel. Truck was running. I just touched the panel covering the blower motor and it came on. Bad connection at the blower motor wire. Thank you for an easy fix!!
Same exact fix for me this morning! 20 degrees out and I couldn't defrost anything. Thank god I watched this guys video!
Good video, thanks
AC blower doesn’t blow hard on max AC when adjusted. All levels work accordingly but when I push Max AC the blower speed doesn’t not change. Stays stuck on regular speed
I replaced my blower motor resistor. It was only working on 4. It works on all settings now. What it is doing now is, it runs for 20 seconds and dies down to nothing.
I went to jumper my car in the ignition dead how do I correct this
Soo why would my blower motor stop working after about a min running it on anything higher than power level 1? Already changed the resistor today to no avail im stuck please help
Exelent video
thanks a million
Man, I got a 2013 5.0 eco boost.
My blower motor and heat was on but was in able to turn them off , being a work truck the wire harness going into the resistor got kicked and exposed wires. The blower quit working and with it being winter and rushing it got shoved at and twisted and ended up popping back on. Last WK it got kicked again and wouldn't come back on. I realized that the resistor plug was melted a bit. I went and bought a new resistor, installed and no fan... The lights on the control panel is on but no fan when I twist the knobs. I then buy a new heater motor, install and still no heat. I checked all fuses, checked the relay you showed but the fan won't blow!!! Help man, so desperate. I spent 105 on the wrong resistor.. got a duel zone... Went and bought the none duel zone because I couldn't return the first one. So I'm out $210 then the new motor for 154.00 it's my work truck and I need to sort it out. Any advice my guy??
Know power to the ignition is that a fuse
Thanks man!
I am so frustrated. I replaced all relay fuses and my fans are still blowing in 30 degrees after start up. I have also replaced the A/C blower motor resistor located under the glove box. Fans are still engaging at start up. In addition to that after replacing the blower motor resister my heat and AC come on with out being turned on and will not shut off! any advise other than to sale it?
I have the same problem lol. Did you figure it out?
Thanks!
I’ve replaced my blower motor resistor 2 times it keeps going on and only working on high any help with that !!???
Pull blower. Make sure it spins free. Test with 12v battery. Watch fingers. Any resistance with blower motor will stress resistor.
@@scottstrangman7309 thank you I’ll try that
So I put a new relay in. And same result no motor but if I jump the terminal and bypass the relay it works. New blower motor, New resistor, all fuses are good. 40, 10 and 5.
So just saying maybe you can make Jeep Wrangler 2010 videos as well? 😂😂😂. ❤
My power steering went out and it’s a billion dollars for the parts and labor etc. you just confirmed that the blower motor which is also not working anymore as of late shares the same fuse and the power steering. Maybe replacing that fuse could be the resolve. Fingers crossed. Thanks