Holset HX40 Turbo Rebuild -Turbo Lab
Vložit
- čas přidán 5. 11. 2014
- Learn How to How to Rebuild A Holset HX40 Turbo Charger
Buy HX40 Rebuild kit Below:
amzn.to/1xMlNyP
HX40 60 x 86mm Billet (Wicked) Wheel turbolabofamerica.com/holset-h...
HX40 10 Blade 64 x 76 10 Blade Turbine Wheel bit.ly/1Y564Cp
HX35 HX40 Bearing Housing bit.ly/1TD8FSM
HX40 Compressor Housing and Wheel Packages: bit.ly/1HWBJ7p
HX40 67mm Comp Housing + Billet wheel Package: bit.ly/1NXCOOF
www.turbolabofamerica.com
HX40 4015c 60 x 86 x 90 Billet Compressor Wheel Buy Here:
turbolabofamerica.com/holset-h...
Buy Hx40 62mm turbo amzn.to/2McJpXG
Buy hx40 67mm turbo 421b62.myshopify.com/products...
64mm HX40 T3 .82 Turbine Housing
421b62.myshopify.com/products...
67mm hx40 t3 .82 turbine housing
Build your own turbo product links:
HX40 64 x 76 10 Blade Turbine: turbolabofamerica.com/hx40-10-...
HX40 67 x 76 10 blade turbine 421b62.myshopify.com/products...
HX40 67 x 89 x 95 compressor : 421b62.myshopify.com/products...
HX40 67 x 89 x 95 compressor wheel + housing: 421b62.myshopify.com/products...
HX35 HX40 machined to fit 60, 62, 67 and oringed Bearing Housing :
421b62.myshopify.com/products...
HX40 Rebuild Kit: 421b62.myshopify.com/products...
HX40 Compressor Housing and Wheel Packages: bit.ly/1HWBJ7p
HX40 67mm Comp Housing + Billet wheel Package: bit.ly/1NXCOOF
Billet wheel Upgrades:
HX40 4015c 60 x 86 x 90 Billet Compressor Wheel Buy Here:
turbolabofamerica.com/holset-h...
HX40 4016c 60 x 86 x 90 (6mm tip height) Billet Compressor Wheel
ebay.to/1P3qTZF
HX40 62.35 x 86 x 90 Billet Compressor Wheel
421b62.myshopify.com/products...
HX40 63 x 99 x 103 Billet Compressor wheel (hx50 Compressor Wheel for HX40 turbo)
ebay.to/2hjPCB3
HX40 67 x 89 x 95 Billet Compressor Wheel
421b62.myshopify.com/products...
Shopify links for hx35 hx40 parts and upgrades:
Hx35 / Hx40 rebuild kit:
421b62.myshopify.com/products...
Replacement hx35 turbine shaft
421b62.myshopify.com/products...
Compressor housing upgrades:
60mm hx40 billet wheel and housing
421b62.myshopify.com/products...
62mm hx40 billet wheel and housing
421b62.myshopify.com/products...
67mm hx40 billet wheel and housing
421b62.myshopify.com/products...
Hx40 bearing housing machined to fit 60mm 62mm and 67mm comp wheels and oring :
421b62.myshopify.com/products...
Turbine housing and shaft upgrades:
67mm hx35 turbine housing upgrade with Wastegate
421b62.myshopify.com/products...
64mm hx35 turbine housing with Wastegate
421b62.myshopify.com/products...
64mm hx40 10 blade turbine
421b62.myshopify.com/products...
67mm hx40 10 blade turbine shaft
421b62.myshopify.com/products...
Hx35 complete upgraded turbos for 5.9 cummins 12v & 24v:
60mm 650hp
421b62.myshopify.com/products...
62mm 650hp
421b62.myshopify.com/products...
67mm 750hp
421b62.myshopify.com/products...
If you need Parts for Your Turbo Build we also Sell Everything to Build New Turbo Chargers. We Also Sell these billet wheels.
Holset Turbo Specs:
HE341 Specs (same as HY35, besides some had 56 x 78 7blade compressor wheel)
HE351 Specs (HX40 60 x 86 7blade compressor, 58 x 65 Turbine(same turbine as HY35 and HE341)
HY35: Compressor wheel: 54 x 78 7blade
HY35 Turbine Wheel 58 x 65mm
HX35 Compressor Wheel: 54 x 78mm (7 blade), 56 x 78 7 blade (rare), 56 x 83 8 Blade, (50 x 78 7blade(extremely rare))
HX35 Turbine Wheel 60mm x 70mm 12 Blade Turbine Wheel
HX40 Compressor Wheel: 56 x 83 6Blade, 58 x 83 8 blade, 60 x 86 6 blade (pro wheel), 60 x 86 7 blade((same as hx40 super)most common))
HX40 Turbine Wheels: 64 x 76 12 blade(most common), 64 x 76 10 blade(hx40 super), 67 x 76 12 blade(rare H1E variant), 67 x 76 10 blade. (machining required for the 67mm.
HX40 Compressor wheel Upgrade options 60 x 86 billet wheel, 64 x 90 x 94 billet 7 blade, 63 x 99 x 103 hx50 billet wheel (designed to fit hx40), 67 x 89 x 95
Shopping: www.turbolabofamerica.com
Community: groups/turbolab/
Business page: turbolabamerica
Contact: turbolabamerica@gmail.com
Key words:
Holset HX40
holset turbo Rebuild - Auta a dopravní prostředky
how drunk were you when you made this video lol
I tried to watch this but I couldn't stop laughing. I hate the hiccups.
Thanks so much for this! Just put your kit on my HY35 that's on my civic. Install was simple and so far no more smoking.
AWESOME That dude can really put the Hick in Hick up!!! Thanks brother you really help me out with your video I went smooth and worked killer. Thanks again.. High fives from Joe in Alaska...
nice vedeo mate good work regards from norway
thanks austin u rock
Obrigado pelo vídeo, ótimo conteúdo, não entendo oque vc fala, mas aprendi muito, pois ficou ótimo o video, vou desmontar minha turbina e ver porque está vazando óleo na parte do compressor, obrigado
Likeeee 👍
Do you know if the hx40w will simply bolt on in place of the hx35w? I understand that as long as the exhaust housing T3 it should bolt up but I mean the oil feed line and oil drain line. I know I'd need a down pipe as well
Are the hiccups required to complete the rebuild? ROTFLMAO
Absolutely I think the same ....
my suburban 6.5 lost power and i think i change the turbo and i would like put a more power on it i have idea buy a holset HX40 what you recomend me? is a good idea put a hx40
good video though. helped me with my kit. thanks.
I'm glad there were no HICCUP's in this install ;-)
Where does the small rubber oring go in the hx35w turbo lab kit
Man,i hate those scums criticized things this dude does,what tools he has and what wrong he did..make your own then show us..if it works then great for u,good job..
Hello Austin, I was trying to rebuild my hx35 but the kit I bought came with only 1 turbine end piston ring whilst my turbine shaft requires 2 piston rings, I can't seem to find anyone selling piston rings here in UK for the Holset, can you tell me if the piston ring from the hx35 is interchangeable with another from say a garret GT series or any TD because these are available here, also can you please tell me what do you think of stepped gap piston rings and are they useable in the Holset application
The models that have the 2 piston rings use 2 of the same standard size rings which the gaps need to be 180 degrees apart. You can use the staggered seal. I don't have a preference of the staggered one over the standard one. The seal only leaks when the sides of the seal where out unless there is build up of oil in the cartridge where it's pressurized and forced out of the seals
Turbo Lab America thank you ever so much
Hello! what is difference between holset hx40 & hx40 super
+lamine ben zina factory billet wheel which weighed the same as the stock one and it had a 10 blade 64 x 76 turbine vs a 12 blade
u happen to have any hx40 6 blade 60mm compressor wheel for sale I need one
+Richard Reid You can get one here ebay.to/1OJMBHZ Just Keep in mind that the 6 blade has a taller tip height than the 7 blade, so the 6 blade is not a direct fit for the 7blade compressor housing. Also there is a 56 x 83mm 6 blade too, so make sure you measure your compressor wheel or check your part number to double check.
very good video, can send ours over for a rebuild?
Thanks for the video.
I heart that Holset turbos are not balanced as an assembly.
Is that true?
And when yes, why is that not necessary?
Best regards from Germany
if the bolt is a typical hex then it needs to be rebalanced after building. It is is the 13point style nut,then they are intenally balanced.
What are doing as far as balancing the assembly?
I use a west coast balancer. It’s like the Hines model 30. You don’t have to balance the assembly on the Hx40. They are just balanced individual pieces
Great information thank you!
Hey where can I get the char my fins are chip and I need to replace that too I have hx40
You need the whole cartridge? Or just the compressor wheel. I have all the parts to make you a cartridge. I need to know the measurement of your wheel and the blade count.
7 blade and I currently have it in a 55 ar dsm housing
I can send u info later when I get home can I find u on favebook?
Leave me a message here: facebook.com/TurboLabAmerica and ill get back to you.
Ok I have a video on how to rebuild a nasa booster motor. Just put all the new parts in the old shell. That's it.
The holes in the thrust bearing that are sometimes too small; what is the proper diameter of them?
+Donnie Stritzinger I never measured them before. I'm not sure how to measure that. I guess I can measure where the bearing is drilled on the outside.
+Turbo Lab America that would be a real help. Thanks, in advance.
Turbo Lab America is the center cartridge of the HX35W the same as the HX40W?
Do not need calibration?
Bruno Pinho puto If you are talking about in terms of balancing, no. The Newest HX and HE turbos with the 12 point 10mm nut are component balanced parts and the Holset turbos with the 6 point nut are rotor balanced according to the Holset Service manual.
The Turbos with the 6 point nut should be realigned to the factory balance marks. The Holset Turbos with the 12 point nut can be aligned at any rotation, because the parts are balanced at any rotation.
what the torque special on wh1c turbo please?
+Kennygsx on the compressor nut?
+Turbo Lab America
yes the locknut for the compressor wheel torque spec.
I just bought one your rebuild kit and everything works great. thanx
Put the nut on by hand then when the nut starts to tighten add 1/4 turn. Torque spec on the mhi 6.5 mm shaft is 7 ft lbs. the Holset is 7mm bore. So the spec will be close the that. I want to check with a torque are here to confirm. I have one turbo here that the guy tightened the compressor nut so tight that the nut is fused to the compressor wheel.
If you need the rebuild kit for the hx40 hx35 here is : amzn.to/1CXDz3A
FYI, those are snap rings not "c" clips. you don't use snap ring pliers on "c" clips.
Brian McNeil,it's all about the handjob bro,as long it works..u can even tight a M16 bolts using a hammer if got the skill..
so where the fuk is your video,,,austin does a fine job,,,why dont you just go read a book instead to learn something,,??if u can read,,,lol
we play drinking game ,every time you have hicap we take shot ,
Maybe a couple tums would have helped this install ?
9:27 fail
Boo!