I tried the hot water technique, I used a few drops of liquid soap, it really made a difference. I do mostly military models and buy a lot of old kits. I always used Luke warm or room temperature water. I find old decals are brittle to begin with, so I am looking forward to try this on those. I hope to see more of you on you tube. Thanks!
Back in the 60's Bill Grumpy Jenkins was my enemy lol! I was a MOPAR kid... Dick Landy and Sox and Martin were the guys I rooted for in Pro Stock. Cheers Old Man
BEST decal video yet!!!! Ty very much for the "Dawn" tip... I'm in the middle of a 1993 Revell Jungle Jim Vega funny car.... the side Jungle Jim decal with all the flames and jungle vines and the crazy hair blowing back is a challenge for sure. I was just struggling with the tiny dang back light decals had to find a video for the large crazy side decal and trying the Dawn right now. I just use these cool "light" body's , no model interiors or model tires because I hand build 1/24 -1/25 drag racing slot car chassis's to mount the body's onto. I did build the model supercharged blower engine with zoomies attached to glue in place for show but this particular car uses a pretty powerful slot car motor to be raced on a scaled down 1/4 mi. race track. Around 35-40' actual length. Ty for the tips this particular car I'm very proud of and is beautiful in every way just hope I get these tricky decals on straight without tearing them.
Thank you for sharing how you apply decals. I noticed how well you did the chrome window frames. Would you show me how you get them so perfect. Thank you so much for putting instructions on CZcams.
Thank god for this. I just came from a video where the guy used three different chemicals to prep the surface, soften the decal, and something else that wasn’t very well communicated.
Good advice. The detergent makes the decal slide easier and gives you a little more time to work with it because soaps have a "wetting agent " which lets the water move more fluidly, giving that oiliness you mentioned. More useless information, I know. Good health from Virginia, Don. Cork
Some great tips there, but we can’t always use those Slixx decals. Which I think are some of the best. How about dealing with old decals? Like the ones that disintegrate once they hit the water? Or adhesion issues?? Any tips on those?
Where do you get your models from? I’ve been having a lot of trouble finding cars I like online through Amazon, etc. and also what is the skill level that you get I want to have as much stuff to do on my models as possible I want them to take forever.
Just let it dry thoroughly. I had the same issue. I just let it dry and to test paint touch a piece that is not visible for example the roof in the interior
the blue color is just the backing paper, the decals are on clear foil. think of it as regular stickers, you have an entire white background but you just peel the cut out sticker
I was looking into 2 separate products to put decal Walthers 904-470 Solvaset Decal Setting Solvent 2oz 59.1mL Bottle and the Decal Setting Solution-Micro Scale Micro Sol 102 + Micro Set 101 Package Decal which is preferred
Magnifique travail mon ami et bonne explication très beau modèle je suis abonné 👍 Magnificent work my friend and good explanation very nice model I enjoy watching your video this is a pleasure for the eyes I am subscribed of France 🇫🇷👍 And I would be proud to have you as subscriber too 👍
mr. yost would have any valve cover decal that say 454 ,427. 327. chvey one's you don't use thank you Mr. nobody oh by the way thank you for bringing up my name in one of your video thank you so much for that that means a lot to me your a 5 star guy at building model's and teaching trick's of the trade please keep building those models I wish more fellow's what you do thank's again
Can i ask a question - I always seem to have residue of decal mix ( Humbrol ) leftover on the car which i struggles to remove. Any tips on how to remove the residue. The residue could be mico sol setting solutions also.. sorry very new to this hobby Thanks in Advance
Colin D Sorry , Brudda ! 😂. If you had shot it with enamel cut with SunnySide lacquer thinner through an airbrush , you'd be sitting square . Only other suggestion I can make would be to purchase a food dehydrator with a thermostat and bake it for 24 hours at 105 degrees .....
@@ScaleModelTechniques Not a professional modeler by any means, but I am very meticulous. I did models in my 20s, and now in my 30s getting back into it with more patience and maturity. I do not have any of that equipment lol. I live in SoCal, and it seems to be curing pretty rapidly. Doing a Starsky and Hutch Torino, so the stripe is critical. Thanks for the quick responses.
Hello sir I am a modeler and am trying to get your CZcams channel so I can watch your video , am ask your help on how I can be part of your channel .Thanks Mac Mccune
Hey Mac! Follow this link below to see how to sign up for our channel. We ended up over at Patreon with everything. Glad to have ya along for the ride! - Jake czcams.com/video/reiI-274nGs/video.html
+Alvin Mccune If by channel you mean the Patreon channel, just search "Donn Yost Patreon", you'll find the "scale model techniques" channel. If just CZcams, like and follow this video...
I tried the hot water technique, I used a few drops of liquid soap, it really made a difference. I do mostly military models and buy a lot of old kits. I always used Luke warm or room temperature water. I find old decals are brittle to begin with, so I am looking forward to try this on those. I hope to see more of you on you tube. Thanks!
Great tip on the dish soap. Thanks, Ron
This is the first time I have seen one of your videos. Definitely won't be my last. I can tell from your work, your a master. Very nice work.
Beautiful chrome work on window trim too, good on you sir! Thanks for takin' the time...
Very helpful info . Beautiful paint finish
Back in the 60's Bill Grumpy Jenkins was my enemy lol!
I was a MOPAR kid... Dick Landy and Sox and Martin were the guys I rooted for in Pro Stock.
Cheers Old Man
Great tip with the drops of dawn. Thanks Don. See you Saturday
BEST decal video yet!!!! Ty very much for the "Dawn" tip... I'm in the middle of a 1993 Revell Jungle Jim Vega funny car.... the side Jungle Jim decal with all the flames and jungle vines and the crazy hair blowing back is a challenge for sure. I was just struggling with the tiny dang back light decals had to find a video for the large crazy side decal and trying the Dawn right now. I just use these cool "light" body's , no model interiors or model tires because I hand build 1/24 -1/25 drag racing slot car chassis's to mount the body's onto. I did build the model supercharged blower engine with zoomies attached to glue in place for show but this particular car uses a pretty powerful slot car motor to be raced on a scaled down 1/4 mi. race track. Around 35-40' actual length. Ty for the tips this particular car I'm very proud of and is beautiful in every way just hope I get these tricky decals on straight without tearing them.
Wow, what an awesome paint finish on that Camaro!
Awsom techniques! I'm definitely going to try it next kit. Thank you!
Thank you....decals gone wrong has kept me away since I was a kid
That paint job is gorgeous.
Awesome Tutorial.....Thanks for sharing.....
Love the vids!! Very helpful! Thank you!
Ive got the same black carousel for all my tools and brushes! Also. Great tutorial!
Thank you for sharing this I messed up my
Headlights on my first model along with a few other stickers so this really helped
Thanks a lot!
These are great modeling suggestions!
Nice How to.... thanks for sharing...
Thank you for sharing how you apply decals. I noticed how well you did the chrome window frames. Would you show me how you get them so perfect. Thank you so much for putting instructions on CZcams.
Damn straight, he's emaculate with his craft.
1 year late but masking tape. Use a fine pointed stick to press the tape down and get easier lines to follow and cut it out with a scalpel or exacto
Bare Metal Foil.
Great tip Donn
Thanks for the "HOT" water n Dawn tips Sir, Have a Blast at NFL East, God Bless All
Thank god for this. I just came from a video where the guy used three different chemicals to prep the surface, soften the decal, and something else that wasn’t very well communicated.
Good advice. The detergent makes the decal slide easier and gives you a little more time to work with it because soaps have a "wetting agent " which lets the water move more fluidly, giving that oiliness you mentioned. More useless information, I know. Good health from Virginia, Don. Cork
i'm learning how to do the bare metal foil chrome that's hard to do it will drive crazy thanks wayne
Thanks Donn.
great video do you ever use micro set and micro sol
Awesome! God bless!
Some great tips there, but we can’t always use those Slixx decals. Which I think are some of the best. How about dealing with old decals? Like the ones that disintegrate once they hit the water? Or adhesion issues?? Any tips on those?
Have you done a video of how you chrome you window seals?
easier than i thought thanks
can k2 clear be sprayed over decals?
Noice! 👌🏼 Chevy Camaro was a beautiful car imo
cool tip sir
I only ever tried warm water, will try hot.
Did that decal fit around the door handle?
Do you apply a clear over the decals?
so helpful
👍👍👍
Thanks!!!
Terry Southern? The Dr. Strangelove writer? Cool!
Where do you get your models from? I’ve been having a lot of trouble finding cars I like online through Amazon, etc. and also what is the skill level that you get I want to have as much stuff to do on my models as possible I want them to take forever.
great info
Great vid! Just found your channel today. What material do you use for that amazing chrome!?
Thank you ! Chrome work is done with Bare Metal Foil .....
I am looking for custom decals to create ? Thank you
I'm building a 51 yr old model and I reckon the decals are shot. I heard that leaving them in sunlight rejuvenates them, any ideas ol' man
great video, thanks for the info you sent me I will be ordering your dvd's. how do you keep from happening or remove fingerprints from your paint job
Just let it dry thoroughly. I had the same issue. I just let it dry and to test paint touch a piece that is not visible for example the roof in the interior
After adding the decal. Are you suppose to paint over it or carefully paint around it???
where can i get some white letter decal at i'm building a 55 ford panel and i want to do my dads logo on it thank you wayne i watch you all the time
Best Video out here! Simple and Easy. Just one question though, when you first put the decal on, does the blue color around the decal just disappear?
Simply put ... It does ....
the blue color is just the backing paper, the decals are on clear foil. think of it as regular stickers, you have an entire white background but you just peel the cut out sticker
What type of glue do you use
I was looking into 2 separate products to put decal
Walthers 904-470 Solvaset Decal Setting Solvent 2oz 59.1mL Bottle and the Decal Setting Solution-Micro Scale Micro Sol 102 + Micro Set 101 Package Decal which is preferred
Kangol Kid I've been using the Walthers decal set for decades and have had no complaints or issues with it ....
Where can you get flannel
How are you doing your trim? Is that foil or chrome pen etc? Thanks in advance, look great
Bare metal foil ....
Magnifique travail mon ami et bonne explication très beau modèle je suis abonné 👍
Magnificent work my friend and good explanation very nice model
I enjoy watching your video this is a pleasure for the eyes
I am subscribed of France 🇫🇷👍
And I would be proud to have you as subscriber too 👍
mr. yost would have any valve cover decal that say 454 ,427. 327. chvey one's you don't use thank you Mr. nobody oh by the way thank you for bringing up my name in one of your video thank you so much for that that means a lot to me your a 5 star guy at building model's and teaching trick's of the trade please keep building those models I wish more fellow's what you do thank's again
20 years ago, when I used to build, I cleared over my decals, do you ever do that?
Brian , I only clear over decals at a customer's request . Generally requested by the slot car nuts ! 😂
Hey mate are car paints ( acrylic/enamals or 2pak ) ok to use on this plastic ?
Yes
Mooie gemaakt strak werk
Can i ask a question - I always seem to have residue of decal mix ( Humbrol ) leftover on the car which i struggles to remove. Any tips on how to remove the residue.
The residue could be mico sol setting solutions also.. sorry very new to this hobby
Thanks in Advance
I have found that Walters decal set solution works best for me . Try going over the area with a bit of Novus 2 on a piece of cotton flannel .
@@ScaleModelTechniques perfect, thanks for the advice. i will surely give that a try
Do I use enamel based paint or acrylic paint for my Amy models
I prefer enamels myself ….
Do you spray clear coat over top of decals?
He mentioned the paint was waxed so i don't think so (thinking that he wouldn't put clear over wax)
I love building kits like this but I’m a plane guy so I build plane kits I am working on the revell b 17-G
what kind of glue do you use on model door handle's and mirrow's please reply thank you
I use Bob Smith Industries medium viscosity super glue .
thank you so much mr. yost
Wow! How do ya get the window trim to look so damn good ?!?!
Bare metal foil , Tamiya cotton applicators , # 11 scalpel blades .....
How do you get dried glue off plastic windows.
Wet sand it 3200-12000 grit . Polish it out ….
how do you do the metral trim ?
Bare Metal Foil ....
@@ScaleModelTechniques thank you sir
How long after applying clear coat (Testors enamel) should I let it cure before applying decals?
Colin D Applied with an airbrush , I'd give it 3-4 days . Spray cans ? It will have to sit for at least 2 weeks if not longer ....
@@ScaleModelTechniques I used a rattle can. Came out pretty good. I have some Microset too. 2 weeks? Holy s***
Colin D Sorry , Brudda ! 😂. If you had shot it with enamel cut with SunnySide lacquer thinner through an airbrush , you'd be sitting square . Only other suggestion I can make would be to purchase a food dehydrator with a thermostat and bake it for 24 hours at 105 degrees .....
@@ScaleModelTechniques Not a professional modeler by any means, but I am very meticulous. I did models in my 20s, and now in my 30s getting back into it with more patience and maturity. I do not have any of that equipment lol. I live in SoCal, and it seems to be curing pretty rapidly. Doing a Starsky and Hutch Torino, so the stripe is critical. Thanks for the quick responses.
do you make your own decals and if so how if not who dose make them your best modler i have ever seen maybe one i will be thank you wayne
Wayne Wootton I do not . The majority of my decals come from Slixx ....
Thanks! This is my first time building a model it does not look good...but anyways thanks!
very good work with the decal, the paint is white pearl? I will follow you to see your next videos. Regards my friend
+JJ HISTORICAL MODELS The paint is Testors Insignia White enamel . Thank you for the kudos ....
thank you very much friend
Hey, that's the same model I'm building
can i meet jake mr. yost please mr. yost what is jake to you i want to meet jake please Mr. yost
Hello sir I am a modeler and am trying to get your CZcams channel so I can watch your video , am ask your help on how I can be part of your channel .Thanks Mac Mccune
Hey Mac! Follow this link below to see how to sign up for our channel. We ended up over at Patreon with everything. Glad to have ya along for the ride! - Jake
czcams.com/video/reiI-274nGs/video.html
+Alvin Mccune If by channel you mean the Patreon channel, just search "Donn Yost Patreon", you'll find the "scale model techniques" channel. If just CZcams, like and follow this video...
Thanks for the tutorial. Can I share the gospel of Jesus Christ with you?