HOW TO Install an Outlet Inside Your Toyota Tacoma (+ Keep 400W While Driving!)
Vložit
- čas přidán 20. 09. 2023
- In today's video, I modify my Toyota Tacoma TRD Off-Road to 1) have an AC outlet in the cab, and 2) keep the factory inverter at 400W while driving! This is possible with a plug-and-play kit from Guild Outfitters. What do you think?!
Tacoma Outlet + 400W Anytime Kit 🔌
guildoutfitters.com/products/...
Guild Outfitters Install Video (he installs the outlet on the front passenger's side): • How to install an outl...
---------------------
📱 More Content on my Instagram
/ chloekuotaco
🔧 My 2019 TRD Off-Road Tacoma Build
Video: • Building a Tacoma for ...
List: www.chloekuo.com/tacoma
💻 Merch on my Website
chloekuo.com/shop
💵 Discount Codes from Partners (brands that I stand by!)
- TACOMABEAST: "Chloe5" for 5% off
- METHOD Race Wheels: Link to get a one-time discount code www.methodracewheels.com/page...
- Sparks Parts (OEM Toyota Parts): "ChloeKuo" for 5% off
- Desert Does It Seat Jackers: Using my link will automatically apply a 5% discount desertdoesit.com/chloekuotaco
- DONGAR Technologies: "Chloe12" for 12% off
- TUFSKINZ: "ChloeKuo10" for 10% off
- Chemical Guys: "ChloeK15" for 15% off
- Cali Raised LED: "Chloe7" for 7% off
- Guild Outfitters: "Chloe5" for 5% off - Auta a dopravní prostředky
The 'New Car Features' document Toyota has on the Tacoma has two precautions for the inverter system:
(1)" When using high power electrical equipment (100W and above) with the power outlet system, do not use other electrical components (headlights, wipers, etc.) at maximum capacity.";
(2) "Avoid using high power electrical equipment (100W and above) with the power outlet system continuously over an extended period of time while also using other electrical components (headlights, wipers, etc.). This can drain the battery."
So it appears Toyota is likely concerned about the alternator being able to keep up. If you're driving, you're more likely to be using headlights/wipers, so that may be why the inverter cuts to 100W when in motion. If a drained battery caused the engine to stall, that could be a safety issue depending on the situation.
For people asking if both sockets (bed and this new one) can be run at the same time, keep in mind the inverter, the inverter wiring, relay for this circuit, etc. were not designed for a 800W load. I wouldn't do it. While the inverter does have thermal protection, if you fry it you're out $400.
Chloe is great at showing me things I didn't know I needed! Guild Outfitters is added to my list.
😅
I have this installed on my new 2023 TRD Sport. The guys at guild are great. Super happy with mine. I chose the forward spot on the passenger side. Everything works great.
Chloe, I love this channel! You are the Tacoma Queen! Thanks for all you do.
I’ve had my truck for 7 years and have only used the bed outlet 1 time but for some reason I still really want this mod. Lol
Love all of your videos Chloe! I'm a lifetime Taco owner and have recently binged most of your videos! Thank you also for recently sharing the 24 Taco review.
Another great and useful mod I didn't know was available. Thank you for sharing this with the rest of us. I've already contacted Guild to make sure this will work with my 2010 2nd Gen Tacoma. Keep the content coming. Thank you for taking the time and effort to create these!
POV You just got done doing the cupholder mod and now you get to do it all over again lol
fr
Thanks for this video, I used to to install one today. I added a 2 port USB charger in the center, up high so it's just below the cup holders & in between the 2 standoffs plus the Guild outlet centered below it. I used this video to help at key disassembly points
You find the coolest upgrades. Thank you.
Great video. Ordered the kit and now I know how to put it in. Thanks Chloe
I didn't even know the Tacoma was limited down to 100w when in motion. Good info!
As usual Chloe awesome mod and installation.
This quick mod made my day!! I always wanted to add this function to my Taco. Charging my laptop while working in the field is an awesome help!! Thank you so much for your great content and tips @ChloeKuo !!!
Ooooooooohhhhh, this is an awesome mod! I'm looking at putting a 12v outlet and a couple usb outlets in that same panel. This is going to change those plans. Thanks for sharing!
We just did it, straight forward, easy peasy , thank you
I added this to my 23 TRD Sport. Was easy to do and works great! I use it to power a fridge.
Never knew that was possible. Thank you for a very informative instruction.
My favorite Taco girl, you always make my day!
HI! Chloe, enjoy watching your energy, your excitement, when making your videos clear and concise instructions, easy on the eye, and I dig that about you.
good grief.
I have been looking for this for my truck!! Thanks for the info
Another good video Chloe I’m always learning something new about trucks 🛻 from your channel i appreciate the info keep up the good content 💪🏾😎
Love it! Just what I've been looking for!
Very nice great video I will definitely have to install one. Great narration
This will help so much when I'm running my dometic fridge!
The title was misleading and funny 😁. Adding a outlet plus 400 watts while driving mod. I was expecting you to do the mod while actually driving 😂
Now that's a great Mod Chloe 👍. ♥️🌮🐶🐾
Watching your video make me miss my Tacoma. But I also love my tundra
I just love Toyota trucks....wish i could own one someday n I love wat u do Chloe♥️
Very useful information! Wish Toyota had this as standard equipment, but happy to see Guild filled the void. As always great video.
Thank you. Very well explained.
Awesome video! I'm sure I will be doing this soon!!
Received it. Have not installed yet. Thank you Chloe.
Awesome - thanks Chloe!
Good video, I bought one and just installed it.
Nice mod for the Tacoma, I might do that to mine. A great extra power source inside the truck.
Now i need something i do not need and probably wont use. Great video. 👍
Great video!
Not bad for $100 bucks! Great vid!
Does this void any warranty with Toyota? I really want to add this to my truck. Thanks for the great video!
My exact same question.
Thanks Chloe!
Chloe, great video as usual. Are you planning or even contemplating on getting the new Tacoma when it comes out?
Do they offer one with USB porte as well???
I think I need this mod make so much sense.
"You had my curiosity, but now you have my attention"
Super cool. I wish my car could do this
I recommend using a Dremel for the cuts. You end up with a much cleaner install.
That’s a brilliant idea…research pa more.
Got this from Guild Outfitters at expo Mtn West in Loveland. Totally worth it.
I don't own a truck and I don't want a truck. But this is still a good channel. Subbed. 🎉
Hi CK You Cover It All GBU And Family Always 🙏❤️ Stay Safe
Chloe you're pretty knowledgeable. Those little red clips underneath the center console do you know a good way to find them online. I don't want to go through a dealership to get them.
Bought this year or more ago, guess it’s time to install it!
Back of the console looks clean….can you access it with the rear seats folded down?
I hope Toyota is paying attention to this channel.
00:02:53 They do!!
amazing 👏🏼
If looks great!
Chloe, just a quick question... do you still use the switches on the MESO shift knob? I didn't see the wires on your video.
Thanks for the vid. This will be cool for vehicle fridges. However, 100W, when the vehicle is in motion can’t keep fridges cool and you still connect and use coffee maker with a 400W. Better off installing a power inverter.
That’s cool!
Is there a way/kit to put a small USB or USB-c panel with the outlet, and possible outlets in other locations?
I just got mine installed, but I placed it inside the center console😎
This is a cool mod. I'd like to do this but also add a 2nd outlet next to it with a couple of SUB ports for powering/charging mobile devices in the rear seats.
I keep wanting to put an inverter in my truck. I guess I'm inverter shopping this weekend.
I plan to do this to power/ charge my 12v fridge/freezer . I would also like to have beside it on console a 12v outlet.
Do you know of one that would work?
Chloe, my ‘18 TRD Sport has a dual port USB port on the back of the console. Do you know if both the USB block and the new block are the same size?
Show more boxing videos your strikes are strong 💪
I just run an extension chord through the back window lol
L😂L
That sounds like something I would do. 😅
But that doesn’t work while driving.
I did this kit on my 4runner, haven't decided where to put the extra plug yet
Do you have a recommendation on a refer that can be plugged in?
If I use this in the cab, will the bed outlet also provide 400 watts as well?
How secure is the outlet when you're pulling out the plug? Doesn't look like there's any support holding the outlet in the compartment, Im afraid when pulling the plug consistently, overtime the compartment gets weaker, and hole gets bigger from the pulling and eventually the outlet just pops right out.
Just get some propoxy, and strengthen it up on the inside
Will this make the bed outlet operate at400 watts also. Can both be used simultaneously.
How did you learn to do all this- I have issues changing batteries in my Flash light! LOL
What kind of fridge do you use?
I already have it in the bed but would be convenient in the cabin
My guess is 400 watts will tempt owners run equipment that will deem it unsafe while driving. But hay nothing wrong with cooking a good stew in a crock pot on a long drive
Will this work if I have the factory USB ports back there?
it looks like there is a green LED on the outlet, when does that light up?
Just bought plugin... Installing in 2 gen. Its all for the Taco😊
Hi I have 2nd gen and just bought it. How’s it working so far and any tips on the install? Removing the center console etc?
Does it give you 400 W in the bed outlet also?
Looks so stock 👍
How does it work because i ran a shop vac in the plugin in the bed of the truck while my truck was running and it kept turning the outlet off
Must do
I was thinking about doing something like this. But instead i just ran some wire from the battery thru the fire wall and under the carpet I have a Bestek 450W inverter in the cab with me instead.
Cool, I have that standard on my Nissan Frontier
Can you do this mod without the bypass kit?
I just ordered the Toyota part number 85530-35050-C0. AC outlet and harness. It cost $100 in Canada. I'm hoping this is the same thing as the Guild Outfitter one. Any ideas?
i have a question for a mod or upgrade as it were? can you change out the usb port to something without an aux plug? can you guide me in some sort of direction to that? thanks i will probably do this video mod cause i need an outlet in truck
I like the USB plug idea.
Know what would be nice? A way to use that for an under seat air compressor.
Do you retain the factory outlet? And do both of the outlets function?
They both will function.
Does this give you a full 400w when the truck is completely off as well? Parked, completely off.
No, the engine has to be running.
Has anyone done this to an SR5? I would like an outlet but not sure how to go about this since it don’t come with the inverter
Might be a dumb question, will the outlet in the bed still work???
Yes it will
Cool
Someone needs to get a part number for the 24 center console inverter to see if we can ad it to a 3rd gen
Next version adds the usbc ports as well 😂😂😂
I have a white '75 FJ40 w silver roof - got less than 90k miles. Want to buy? I'm in Cali
Nice. This might be a cheaper method for getting higher power to recharge my ECOFLOW Delta 2. DC Charger Plug is DC 120W. A Victron Energy Orion 12/24-Volt 20 amp DC-DC Converter (DC 480W) cost $160 vs $100 for this upgrade kit which provides AC 400W anytime.
This might not work for charging an ECOFLOW due to the modified sine wave issue from the factory inverter. The ECOFLOW needs a true/pure sine wave on AC charging. The DC-DC Converter is still your best bet.
@@nickknack5884 Thanks for the info. I'll double check the AC input requirements for the ECOFLOW. I can also try charging directly from the truck bed plug. But I don't want to do anything that might damage the ECOFLOW.
I checked some of the Tacoma forums and people have tried AC bed plug with their ECOFLOW and Jackery solar generators. So it seems safe to try the 400W output with the ECOFLOW. With 100W output the inverter overloads and shuts off. There was some mention that the inverter gets hot. Tinkerer's Adventure tried the AC bed plug and mentioned that the Delta 2 (input AC charge rate limited) did not charge due to the modified sinewave output. Anyway I will give it a try since it doesn't appear to damage the ECOFLOW.
The Delta 2 doesn't charge from the AC bed plug @400W. It did not overload the bed plug. So the best option for faster charging is DC-DC Converter.
Now how do we add rear AC vents to the Tacoma? Lol
Im going to say something which may annoy some people.
But I just want to genuinely commend you for being one of extremely few women who don't use their body to get clicks on YT.
You have excellent content, and you definitely know your stuff,
all of which is why I've subscribed. 👍
Classy