Thank you. Most sellers of ebikes don't know about repairs and after sales really isn't any help for real parts that makes up the ebike. In my case I've been trying to get the freewheel for more than six months and the rear hub motor has the hall/phase small wire connector preventing easy removal of the nut cover, nut, washers, etc.
My craving for more of your content has me rewatching your playlist from the beginning. However, I am a Tiny bit undecided whether the following is a good thing or not buuuuut... ***I did notice there are a few of your episodes i missed along these years, it's not good because i missed them but good because there are a few "old" that are now new to me and i'm super excited to see them. what an awesome journey , thumbs up all the way.
Can you make a video how to install ebike throttle? Right now i'm using a thumb throttle with led indicator and on/off button (6 wires). And i want to change to twist throttle, with key, and voltage indicator (5 wires). It's kinda confusing to install it. Thank you
Is it possible to make a hoverboard motor/wheel move without the hall sensor? Mine has wires for it but my speed controller is just a DC controller. Do I need to get a controller with more connections?
Great video by the way so as i understand this I have a 6 pin connector coming from the motor and a 5 pin connector coming from the controller,so i just match the colour wire up and what's over just leave it or cut off have I got that ???
Thanx for the video! I have a Motorino XPh with only 200 kms on it, and the controller is acting up I think? The brake and juice both come on randomly while I am riding it. I already got in an accident, b/c it accelerated in traffic. I am watching/reading anything I can find to learn how these e-scooters, and their components work.
Hi , can you say if a very small skateboard hub motor (hall sensored) 200w 36v works with this sensored controllers , i understand controllers work for motors up to 500w per example , this will be my second proyect and i prefer this one because ESC available last just a little, thanks i really leaned a lot from you here.
Friend gave me a unmarked e-bike. I think it is an x-treme trail maker pre-2011, it needs a new controller. I did some research an found a 2011 and later X-Treme Brushless 24V Controller - MODEL YK70B. However the supplier had a foot note that said for pre-2011 that I needed the version 1 controller. Problem is, I can't find a version1 controller for this bike. Do you know where this could be found or something comparable, maybe with easy to follow schematic/installation instructions for a novice.
Hey, sometimes the wire colors are a mismatch and you have to figure out the right combination. How do you do that and how do you know for sure that a hall mismatch is the source of the problem? I have a new controller that doesn't do anything more than make the motor twitch for a second followed a click and then nothing.
I've given up on using hall sensors. I'm only use controllers with a sensorless mode. I'm tired of having a dead motor just because the halls are damaged somewhere when halls don't even do anything important. Life should be easy
I have a controller with the 6th white hall sensor wire. My motor has the 5 hall sensor wires. They both came in the same Voilamart 500W Front wheel kit. When I turn it on, the battery indicator lights on the throttle. The wheel dose nothing. Could it be the 6th wire causing my problem?
hello mate can u help me I got a sxt 1000xl 48v electric scooter the motor is a 1600w got a yellow blue green also brought a control unit evo 1000 w 48v colour wires are brown an yellow an blue together do yo know what wires go to each other motor to control unit let me know if you know please
Question for you, ok provided the colours match your golden, what if the colours dont match is there a chart that explains what the colours are, you can reasonably assume red positive black negative but what about the rest?
Hi I have an error 8 message on my Chinese 1500 watt 48v ebikemotor kit any ideas why the motor will not switch on? There is no pas attachment. Only one white wire not attached to the motor to controller. Brakes not attached. Pas not attached. Sensor not attached. Thanks Robert
Nice, beautiful.. I bought both of ur books, from Amazon.. ( i prefer the big blue, about battery, thr brown & small) very general, very!) but, me no reader, or better understander:/) The video..makes a long para., with pics too! into 1,2,3!: God bless all:))
Subject: speed increase I have a Qiewa Qmini scooter (amazon) the max speed doesn’t quite reach what it advertise on amazon (60km/h max). At best on straight flat I can get up to 36km/h max. I’m 145 pounds. Without me on it reach about 39km/h 5c 18650 lithium battery 48v 15.6ah 500watts brushless hub motor 8” tire 48v 17A controller I was thinking of swapping out the stock controller for a 48v 28A 500w controller to see if that increase the max speed but not quite sure if that will do it. My question is to increase the max speed do I change the controller or up the battery power? Or would I even achieve such speed beyond 36km/h because of the 500w motor with the 8” tire? Thank you for your help.
I know for a fact the ones with a 'learning' feature do work. Like this one www.ebay.co.uk/itm/E-Bike-Controller-36V-48V-350W-E-Scooter-Bicycle-Motor-Brushless-Controller/153210561009?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20180816085401%26meid%3D54729808775a4a04b577b35c65373919%26pid%3D100970%26rk%3D5%26rkt%3D15%26sd%3D141975968932%26itm%3D153210561009&_trksid=p2481888.c100970.m5481&_trkparms=pageci%3Acd370c90-e7f9-11e8-b24b-74dbd18012ed%7Cparentrq%3A11cf81731670ac3cbd39c240fffa83bc%7Ciid%3A1
Hello.. I have a 48v 750w bbso2 mid-drive. I'm looking for a way to put a bright BREAK LIGHT. on the back of my recumbent trike. Hand signals fall short when you signal a stop with your hand dragging the ground. LOL Do you have a solution, maybe a way to have a thumb button to activate a bright tail light that I can push when i'm preparing to stop..? I"ve tried those brake lights with accelerometers, but they are far too sensitive and just flash on and off with every bump in the road. Love your channel.. I'm learning so much. Thanks Robb PDX
Hey Rob, I realize it's been 3 months since you left this comment question for Micha but if you've not yet found a solution to hooking up a bright brake light signal on your electric recumbent, I may have a solution for you. I'm not that familiar with Bafang mid drive controllers (I understand it to be an all-in-one unit,) but if it has the same connection options as most hub motors, it's possible that you already have all you need to accomplish this. Remembering that many of these controllers come from and were designed for electric scooters that functionality was included in many of them but essentially ignored when used on Ebikes. As a consequence if yours has both a brake high and (a normal) brake low plug for your Ebrakes, then using the brake high signal hookup instead of the low, will allow you to parallel a brake light that will function normally with the opening and closing of the Ebrakes reed switch. Perhaps buy a scooter/MC tail light if you like the look and can fit it, but any bright red led should work too. Of course if you don't have such a plug that's a different matter and a lil more complicated to achieve. Hope this helps you, and stay safe when riding :)
i've got a hall sensor error but the connector from the wheel is missing the white wire. one of the wheels I have that works has the white wire. You can get it to spin but the motor is really clattery (I assume this is because the timing of the magnets isn't correct?)
good morning sir i have a electric bike 72volts 1000wats controler.can i pavor!can you teach me how to replace to 2000watts how to install.many thanks and god bless you
Hi, do you have any advise for cooling the controller? I have electric scooter which I have modified (Dual Motor 48V from single 36V) and it's getting hotter when I doing a long ride. I'm afraid that I might burn myself while riding =P Thank you!
Amazing how videos on CZcams remain useful no matter how old they are
Thank you. Most sellers of ebikes don't know about repairs and after sales really isn't any help for real parts that makes up the ebike. In my case I've been trying to get the freewheel for more than six months and the rear hub motor has the hall/phase small wire connector preventing easy removal of the nut cover, nut, washers, etc.
You've been my go to for a few years now, thanks
Thanks just the video that I needed 👍
Great video, was looking how to do this without messing up the connections. Thanks gain.
My craving for more of your content has me rewatching your playlist from the beginning.
However, I am a Tiny bit undecided whether the following is a good thing or not buuuuut... ***I did notice there are a few of your episodes i missed along these years, it's not good because i missed them but good because there are a few "old" that are now new to me and i'm super excited to see them. what an awesome journey , thumbs up all the way.
Can you make a video how to install ebike throttle? Right now i'm using a thumb throttle with led indicator and on/off button (6 wires). And i want to change to twist throttle, with key, and voltage indicator (5 wires). It's kinda confusing to install it. Thank you
Besides the red and black, do the other 3 wires always match?
Is it possible to make a hoverboard motor/wheel move without the hall sensor? Mine has wires for it but my speed controller is just a DC controller. Do I need to get a controller with more connections?
Great video by the way so as i understand this I have a 6 pin connector coming from the motor and a 5 pin connector coming from the controller,so i just match the colour wire up and what's over just leave it or cut off have I got that ???
what is purpose of white wire? i mean to use of white wire ?
Thanx for the video! I have a Motorino XPh with only 200 kms on it, and the controller is acting up I think? The brake and juice both come on randomly while I am riding it. I already got in an accident, b/c it accelerated in traffic. I am watching/reading anything I can find to learn how these e-scooters, and their components work.
Hi , can you say if a very small skateboard hub motor (hall sensored) 200w 36v works with this sensored controllers , i understand controllers work for motors up to 500w per example , this will be my second proyect and i prefer this one because ESC available last just a little, thanks i really leaned a lot from you here.
Simple process if you have the female connectors that your pins go into. Would like to know if the controller came with the corresponding connectors.
Friend gave me a unmarked e-bike. I think it is an x-treme trail maker pre-2011, it needs a new controller. I did some research an found a 2011 and later X-Treme Brushless 24V Controller - MODEL YK70B. However the supplier had a foot note that said for pre-2011 that I needed the version 1 controller. Problem is, I can't find a version1 controller for this bike. Do you know where this could be found or something comparable, maybe with easy to follow schematic/installation instructions for a novice.
Do all e bike controllers support hall sensors ?
Hey, sometimes the wire colors are a mismatch and you have to figure out the right combination. How do you do that and how do you know for sure that a hall mismatch is the source of the problem?
I have a new controller that doesn't do anything more than make the motor twitch for a second followed a click and then nothing.
Did you ever figure it out? Our motor has all diff colours than the controller.
It's been 7 years and question remain the same , what if the colours of wire don't match.
I've given up on using hall sensors. I'm only use controllers with a sensorless mode. I'm tired of having a dead motor just because the halls are damaged somewhere when halls don't even do anything important. Life should be easy
Hi, my motor had only 3 hall cables, red,white and black. Can I still use only those 3 cables on the connector side?
I have a controller with the 6th white hall sensor wire. My motor has the 5 hall sensor wires. They both came in the same Voilamart 500W Front wheel kit. When I turn it on, the battery indicator lights on the throttle. The wheel dose nothing. Could it be the 6th wire causing my problem?
Probably the learning wire, needs to be hooked up and unhooked to set direction before it will work.
What is hall sensor
hello mate can u help me I got a sxt 1000xl 48v electric scooter the motor is a 1600w got a yellow blue green also brought a control unit evo 1000 w 48v colour wires are brown an yellow an blue together do yo know what wires go to each other motor to control unit let me know if you know please
Question for you, ok provided the colours match your golden, what if the colours dont match is there a chart that explains what the colours are, you can reasonably assume red positive black negative but what about the rest?
Did it work?
Please why did you remove two wires and not one?
Hi I have an error 8 message on my Chinese 1500 watt 48v ebikemotor kit any ideas why the motor will not switch on? There is no pas attachment. Only one white wire not attached to the motor to controller. Brakes not attached. Pas not attached. Sensor not attached. Thanks Robert
Is it possible to just solder the connections rather than do it like this??
If my wheel only AVE 8 phase wires and controller 9. ?
Nice, beautiful.. I bought both of ur books, from Amazon.. ( i prefer the big blue, about battery, thr brown & small) very general, very!) but, me no reader, or better understander:/)
The video..makes a long para., with pics too! into 1,2,3!: God bless all:))
That type connectors are dirt- and corrosion collector. Waterproof is available.
Hello from Portugal, thank you so mutch.
My motor cable with 9 wires cannot what i do with the white wire. Tanks...
You can find these connectors under "hall sensor connector white X pin" on Alibaba :) Spread the word
Cheers
what size connectors are they
@@x6Fantazia9x *ten inch*
For a 24v motor of ebike how much "ah" is required?
Hi, could you say the reference to the connector to find in internet please? thank you very much in advance
Subject: speed increase
I have a Qiewa Qmini scooter (amazon) the max speed doesn’t quite reach what it advertise on amazon (60km/h max). At best on straight flat I can get up to 36km/h max. I’m 145 pounds. Without me on it reach about 39km/h
5c 18650 lithium battery 48v 15.6ah
500watts brushless hub motor
8” tire
48v 17A controller
I was thinking of swapping out the stock controller for a 48v 28A 500w controller to see if that increase the max speed but not quite sure if that will do it.
My question is to increase the max speed do I change the controller or up the battery power? Or would I even achieve such speed beyond 36km/h because of the 500w motor with the 8” tire? Thank you for your help.
Where can I buy these
Sir Mike some controllers dont have hall sensor.Does it work without it sir?
I know for a fact the ones with a 'learning' feature do work. Like this one
www.ebay.co.uk/itm/E-Bike-Controller-36V-48V-350W-E-Scooter-Bicycle-Motor-Brushless-Controller/153210561009?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20180816085401%26meid%3D54729808775a4a04b577b35c65373919%26pid%3D100970%26rk%3D5%26rkt%3D15%26sd%3D141975968932%26itm%3D153210561009&_trksid=p2481888.c100970.m5481&_trkparms=pageci%3Acd370c90-e7f9-11e8-b24b-74dbd18012ed%7Cparentrq%3A11cf81731670ac3cbd39c240fffa83bc%7Ciid%3A1
Hello.. I have a 48v 750w bbso2 mid-drive. I'm looking for a way to put a bright BREAK LIGHT. on the back of my recumbent trike. Hand signals fall short when you signal a stop with your hand dragging the ground. LOL
Do you have a solution, maybe a way to have a thumb button to activate a bright tail light that I can push when i'm preparing to stop..? I"ve tried those brake lights with accelerometers, but they are far too sensitive and just flash on and off with every bump in the road. Love your channel.. I'm learning so much. Thanks Robb PDX
Hey Rob, I realize it's been 3 months since you left this comment question for Micha but if you've not yet found a solution to hooking up a bright brake light signal on your electric recumbent, I may have a solution for you. I'm not that familiar with Bafang mid drive controllers (I understand it to be an all-in-one unit,) but if it has the same connection options as most hub motors, it's possible that you already have all you need to accomplish this. Remembering that many of these controllers come from and were designed for electric scooters that functionality was included in many of them but essentially ignored when used on Ebikes. As a consequence if yours has both a brake high and (a normal) brake low plug for your Ebrakes, then using the brake high signal hookup instead of the low, will allow you to parallel a brake light that will function normally with the opening and closing of the Ebrakes reed switch. Perhaps buy a scooter/MC tail light if you like the look and can fit it, but any bright red led should work too. Of course if you don't have such a plug that's a different matter and a lil more complicated to achieve. Hope this helps you, and stay safe when riding :)
i've got a hall sensor error but the connector from the wheel is missing the white wire. one of the wheels I have that works has the white wire.
You can get it to spin but the motor is really clattery (I assume this is because the timing of the magnets isn't correct?)
sansaremakanisam
Mika, ?
What about the other connector ?, not that one
How do I remove pins from other plug, ?
Hope you understand
thank you for sharing ! can you do a video on how to make motor? :)
do you know the proper name for the connector? It's not Molex...
Do you know it? I'm searching for these as welel
Ah found it! Search for "16 Pin FW-C-16M-B FW-C-16F-B " on google or on alibaba "hall sensor connector white 16 pin"
Cheers
The one in the video is a DJ7061-2.8-11/21 connector. Used in cars, usually.
good morning sir i have a
electric bike 72volts 1000wats controler.can i pavor!can you teach me how to replace to 2000watts how to install.many thanks and god bless you
Where to buy this plastic plug?
alibaba and aliexpress but will take 3 months to deliver
Ah found it! Search for "16 Pin FW-C-16M-B FW-C-16F-B " on google or on alibaba "hall sensor connector white 16 pin"
Cheers
What if my wheel doesn't have a hall sensor
Did you solve it? I have three wires and the standard controller does not move the wheel
somtime is not temperature wire (white), sometime is speedometer
My controller has 6 hall wire but my motor has 5, if i color match them,one wire from controller will be left unused. Will that work.
I have the same issue. Did you find out the answer?
@@urbanpuma9136 Just connect the wire you already have matching, as I found out it doesn't matter to leave one out.
Hi, do you have any advise for cooling the controller? I have electric scooter which I have modified (Dual Motor 48V from single 36V) and it's getting hotter when I doing a long ride. I'm afraid that I might burn myself while riding =P
Thank you!
Jay I just put a 36v bafang motor kit ebike together and I’m woundering is it necessary to unplug the battery or is the off switch approximate?
number one piece of info : WHAT IS THE NAME OF THIS NEEDED CONNECTOR ???????????
Hall Sensor Connector. My question is, CAN IT RUN WITHOUT IT?? My new controller doesn't hall sensor connector
Did you figure it out? Im searching as well
Ah found it! Search for "16 Pin FW-C-16M-B FW-C-16F-B " on google or on alibaba "hall sensor connector white 16 pin"
Cheers
Why does my thro