Easy Simple Plywood Desktop for BEGINNERS
Vložit
- čas přidán 21. 12. 2022
- In this video I show how you how to build a sturdy plywood desktop with finished trim and stain. It's inexpensive and looks great. For reference this table top is 6' wide and 22'' deep
*PLEASE SUBSCRIBE* if you enjoyed the video!
*Products Used*
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of our links we will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing us to continue to bring you valuable content.
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
DEWALT circular saw:
amzn.to/3MCtwsz
Wood clamps:
amzn.to/3VjTGTw
Glue brush:
amzn.to/3VieVFv
Glue Roller:
amzn.to/3Gc9fbJ
Rigid Brad nailer:
amzn.to/3ig1pV6
Tightbond II premium wood glue:
amzn.to/3FOpqdL
IKEA ALEX drawer unit:
www.ikea.com/us/en/p/alex-dra...
MY GO TO TOOLS
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
DEWALT circular saw:
amzn.to/3MCtwsz
DEWALT impact driver & hammer drill:
amzn.to/3CVhS8U
Bosche miter saw:
amzn.to/3i8gdVz
DEWALT bit set:
amzn.to/3g7ddHT
Gorilla glue:
amzn.to/34ULnJK
6'' Clamps:
amzn.to/3IARLqM
12" Clamps:
amzn.to/38oDWMZ
Delta Table Saw
amzn.to/3WL7d7s
Filming Equipment
Canon EOS M50 camera:
amzn.to/3t39P46
Tripod(best tripod ever):
amzn.to/3WwAnbz
Hand held Tripod:
amzn.to/3NB06LX
Universal camera mount:
amzn.to/3WxKTzc
Lavalier Microphone:
amzn.to/3l82Eqx
RODE wireless GO microphone:
amzn.to/3DF8yW3
Directional Microphone:
amzn.to/3UugnEM
Adjustable Lights:
amzn.to/3Dzszx4
Set lights(mainly all that I use):
amzn.to/3WBjDQo
Bear Mountain Builds things
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds (Free Plans): www.bearmountainbuilds.com/
Patreon: patreon.com/BearMountainBuilds - Jak na to + styl
66 yr old handy woman and new subscriber here. I think I have clamp envy. 😊
One of my favorite channels! Doesn't use click bait or try to be funny. Straight to the point!!
I am considering building a sowing table for my wife. This will fit the bill! Thanks for your videos!
LOVE the outtakes 😂
Awesome and loved the outtakes!
great build!! can't wait for another video!
Very good project. I will build something similar to this, hopefully, in the near future. I would consider putting miters on the edge banding. It is a skill that beginners can do. Good video👍
I am building a desk top today! Good timing. LOL😂
Great stuff!
Nicely done
The desk looks great! I just have to say that using gloves with a table saw can be really dangerous. If the blade catches the glove it can easily pull your hand in. Safety is good but gloves and power tools don't mix well.
Looks great, you should make a video of how you built the drawers and such.
Those are ikea drawers
Very, very timely. :) Thanks to settling, my office floor is basically a big bowl, so I don't really have enough flat, level space to make a big fancy desk with drawers. I'm getting ready to make a similarly-sized floating desktop that I was planning on making in a very similar fashion to French cleat on the wall, and drop in a couple of uniquely-sized support legs for the front, then probably make some hanging drawers to hang off the bottom of it. This video just being released is the reminder I needed to get to work on that now that some other work in the office is done. :)
i always use sanding sealer on all my plywood, if you paint and not stain it works great, after you paint it after using sanding sealer it dont even look like plywood anymore.
wow friend i am from pakistan brilliant video
To reduce waste, no need to cut all 4 sides to square the slab. It the cut edges of the plywood are placed on the same side, the other 3 sides will be as square as they can be. For the aspen trim, I'd recommend a rabbet to reduce the thickness visually, while also providing a shelf to help keep the top flat. This can be accomplished either via careful tablesaw cuts, or using the rabbet shelf most jointers have.
this the easiest one so far. great idea imma just buy 2 drawers and a piece of wood
What stain color did you use for the table top? It looks great!
I believe it was water based black walnut
I want to make table top for an alcove out of 3/4" maple plywood that is 72" long by about 30" deep. Is that too big/ long if it is just supported on 2 x 2's screwed to the wall on the 3 sides of the alcove? If I doubled up the 3/4 plywood like you did by gluing them together would that give it enough strength so it won't sag . thanks in advance.
If the frame is made out of 2x2s you would probably be pretty good, but it might not be able to take a ton of weight. If it still feels flimsy you can add an L bracket
BYO 25 clamps?
I'm looking to do this exact thing with birch plywood. However instead of the edge band I'm going to use veneer and instead of the drawers i'm going to use legs. I'm worried about it sagging without a skirt/apron. Anyone know if this will sag when support by four corner legs?
Instead of the logs, just use a few cowls by putting a couple of playing cards in the center and using your abundance of clamps to clamp down on the center.
i want to make smaller desk for my laptop and others peripheral (external hdd , keyboard,mouse) will 12mm plywood can stand/hold that weight from my stuff , the dimensions is 100x60cm / 39x23inch
You should probably be fine but it may sag over time
Can you please share the thickness of your table top in mm ?
Hi, I was wondering if you made the drawers or you bought them premade, if so where did you get them?
They’re premade ones from IKEA. I think I have a link to them in the video description
@@BearMountainBuilds I couldn't find it in the description.
Did you secure the desktop to the drawers? @@BearMountainBuilds
One other quick comment.........I have not seen a vice in your shop. I keep thinking I need to buy one soon??? JC
I never use vices. I basically only use wood clamps to hold things in place
So I see u take 2 pieces of 1/2 and glue together. Would 1 piece of 3/4 be okay strength wise on a 6 ' table?
I recommend at least 1" thick top. Truly, I think the best build would be two sheets of 3/4" glued together
@@BearMountainBuilds Ty. Apreceate the feedback.
Sorry but one more question would stacking and laminating 3 1/2 bitch ply sheets together be better than 2 3/4 inch sheets? Someone told me it can create a stronger final piece but unsure why he thought so . Since there's now 2 not 1 gluejoint.
what drawers are you using?
They are from IKEA called ALEX. I’ve added a link to them in the video description
Do you mean Sande? That's a (group of) wood species used almost exclusively for plywood.
Hi you didn’t show how did you install that table top ?
It just sits on top. I put some little rubber bumpers on to add grip
how strong is it
It’s pretty strong, but if you want it to be stronger you can use 3/4” plywood
Got one, love it. But I'm an old man and not new to woodworking. But, I enjoy your enthusiasm and knowledge. If I may be so bold, try using some cauls vs. logs. And be careful, explain to your viewers that if they go with a veneered plywood, it is very easy to sand completely through the veneer.
Thanks for the advice! I think I’ll definitely be picking up some cauls for the next lamination project
@@BearMountainBuilds You can easily make those cauls out of some scrap pine or hard wood left over from another project, or rip some 2 x. I like mine to be about two inches wide and between inch to inch and half thick to spread the weight. Anyway, I like your channel. Good luck!
I can’t believe that in 11 months no one has commented on the huge bag of Albanese gummy worms on the back table 😂 Nice choice 👍🏼
I love those gummy worms!
Great video. But the "beginner friendly" videos and "budget friendly" leave out that you need a TON of tools and equipment. :(
I'd rather buy a tool and build a desk than buy a desk for the same cost. That's how I built up to the tools I have today. Investing in your shop and pays off over time
Not if you just want the desk and your goal isnt a shop. Nice work though.
awesome video, and damn your arms are so huge/hot!
Yeah,,, Kinda dumb-- so I’m going to run out and spend 400 on clamps and Then the cost of the Material---- NO.
You can just put heavy stuff on it too as long as you have a flat surface. You don't need to use clamps