2013-2015 Acura ILX front bumper removal | ReveMoto
Vložit
- čas přidán 10. 07. 2024
- Learn how to remove your Acura ILX front bumper cover with simple tools in just 15 minutes. This is our very own bumper painted to match!
Where to purchase: bit.ly/13-15_Acura_ILX_front_...
Visit us at: www.revemoto.com
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
0:00 start
0:15 Intro
0:34 Remove the lower bumper bolts & clips
5:35 Remove clips and screws from the side bumper
8:38 Remove the radiator cover
10:20 Dismount the bumper
11:36 Unplug the collision sensor
12:38 Outro
Hello and thank you for watching our Acura ILX front bumper replacement video. Some of you may not know but Honda owns Acura and they make their vehicles easy to repair. We definitely love straightforward repairs on all the jobs we do. We paint brand new car parts and ship them to you, anywhere in the 48 states. Our customer walked in what the driver-side portion of their bumper broken. I believe they may have hit a pothole or ran something over. Regardless of how the damage happened, it's usually better to pay for small damage out of pocket. Why? Because, this way the damage does not get reported on your car, which will cause your insurance premium to go up for years, and decrease the value of your car. So let's begin!
TOOLS NEEDED:
You will need a 10mm wrench, socket wrench, or impact gun for all the bolts. You will also need a panel clip removal tool. If you do not have one, that is okay. You can substitute a flat-head screwdriver instead. Lastly, you will need a Philips screwdriver for the screws on the bumper ends.
PROCESS:
This is a simple process to do, trust us! We started by removing the lower bumper bolts and clips. There are about 8 bolts across the whole bottom bumper alongside 8 clips. Our customer lower engine cover was broken due to the accident but you should be able to see the bolts a lot easier. All the bolts should be a size 10mm and if you have an impact gun, you'll make quick work of them. The clips can be removed with the panel clip removal tool by popping the center tab out. You can also use a flat head screwdriver, just work the center out and pull the clip out. Once you've worked your way through the bottom, you can then move to the bumper ends or sides. Separate the fender liner from the bumper and remove the Phillips screw that secures the bumper to the fender. There really isn't a whole lot to do here, so now you can move to the top of the bumper. You are gonna have to remove the radiator cover to expose the bolts for the top bumper. The cover is held on by plastic clips similar or exactly the same as the lower bumper. There are 2 clips in the center that are a bit different. With these, just push in the center and pop the clip off. Now, the bolts should be exposed and simply remove. The bumper is now ready to be dismounted. Start from the ends and pull out. Every bumper will clip onto the fender and under the headlights. Make sure you don't forcefully remove the bumper. There is a pre-collision system or sensors on the front bumper and you do not want to break anything on the harness. The bumper is now removed and you did it!
#ilx #acurailx #acura #revemoto #frontbumper #diy #paintedbumpers #ilxbumperreplacement #paintedpartsonline
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
Hello and thank you for watching our video!
If you need this bumper or any accessories, please visit our website below!
bit.ly/13-15_Acura_ILX_front_bumper
Great video. I love my ILX!
Andrew we love that you love your ILX! These are beautiful under rated vehicles! Thank you for the positive comment. If you ever need anything for your car please visit us at www.ReveMoto.com
Needed this lol this is my exact car thanks great video
Alright! We're happy to help and thank you for watching!
thank you your video helped me a lot
Glad to hear that! Please subscribe if this video helped, the sub really helps us a ton.
Thanks i needed this to replace ballast
Awesome glad to help
That sensor maybe the outside temperature sensor. I could be wrong though. I could never find any repair manual that shows where it's located. All the diagrams I've looked at just say it's in the front but aren't specific. Perhaps now I can actually replace it.
That would make a lot of sense cuz the bumper did not have any other type of sensors. I hope this video helped in fixing that issue. If you need any parts for your car go to www.ReveMoto.com.
I have this model I crashed the sliver part how much would that cost to replace ?
Hello Leslie! There are 2 types of grilles and I believe they are around $200 not including the Acura emblem. Please check out the next video or visit our website and we can get you a quote for the front grille and ship it to you.
Next video: czcams.com/video/is4j1Cb6nos/video.html
Website: bit.ly/13-15_Acura_ILX_front_bumper
Great videos ! Subscribing. Do you know by any chance the parts for the underbody engine shield ? I bought a 2014 ILX which has only a front bumper but no plastic underbody shielding.
Some call it a lower engine cover but there is two one in front and one just behind it. The one that I think you need but look up photos maybe part number 74111TR3A00. Hope that helps and thanks for watching. www.ReveMoto.com
@@ReveMoto Thank you a lot!!!