Impact M3 Complete Disassembly - FX Masterclass

Sdílet
Vložit
  • čas přidán 18. 06. 2021
  • Famed airgunner Ernest Rowe takes you through the complete disassembly of the Impact M3. This is the disassembly only of the Impact M3.
    Sections (click or tap to jump to section)
    Degas the gun - 0:22
    Degas the Power Plenum - 0:42
    Cheek rest - 1:20
    Scope rail - 1:34
    Barrel - 2:05
    Valve adjuster - 2:40
    Top rail - 3:17
    Cocking assembly - 3:56
    Remove plenum from front Valve Tube End - 4:26
    Remove Plenum from rear block - 5:14
    Hammer Spring seat (C1) - 7:23
    Remove Front Valve End of Plenum - 8:30
    (optional) Angled bracket removal - 8:54
    First reg removal - 9:37
    Disassemble first reg - 11:36
    Hammer assembly - 13:48
    Trigger guard - 14:08
    Trigger assembly - 14:35
    Remove 2nd reg - 15:33
    To learn how to reassemble the Impact M3 follow this link here • FX Impact M3 Reassembl...
    If you are ever unsure and need service in US visit: fxairguns-usa.com/service-req...
    For all other areas outside of the US please visit: fxairguns.com/support/

Komentáře • 41

  • @OneGenericName
    @OneGenericName Před 3 lety +7

    There are so many tools involved in this operation that a complete tool list might be helpful before you even start 👀👍

    • @MM-ip9zb
      @MM-ip9zb Před 5 měsíci

      i came here looking for the same answer on what to buy and wich sizes....

  • @galvinklein7546
    @galvinklein7546 Před 3 lety +1

    Just Want to say thank you very much for these videos. although their are many fine details that are making my head explode, like finding the difference between the .357 chassis and smaller calibers. I still appreciate the time you put aside from your busy schedule to help in any way you can. thanks

  • @TheOregonOutlaw
    @TheOregonOutlaw Před 3 lety +7

    WHAT good is there in such a video, when we are told this version of the impact will NOT be available for 5-6 MONTHS! Ernest, I sincerely appreciate your skills and the time you take to do these videos, however it's like salt in an open wound! We that aren't on the FX "Kiss-up" list to get preferred treatment and be supplied with free goodies get little from these posting. Sorry - but those are the hard facts. C'ya next year.....when we actually CAN spend too much money on a computer....errrr I mean air gun, which will likely be out of date before it's delivered!

  • @musicman7393
    @musicman7393 Před 2 lety

    youtube needs a play in reverse setting. lol I'm good at at taking things apart. Its reverse disassembly I have trouble with xD. Thanks for the vid Mr. Rowe I always enjoy your work and craftsmanship!

  • @timpierce5772
    @timpierce5772 Před 2 lety

    Great video. I appreciate the time you took to make it. Hoping you will make another video showing the tools you use including the special tools along with the modifications made to the vise grips. Thank you again.

  • @ricardoavila2048
    @ricardoavila2048 Před 3 lety

    You are the Man Ernest! Fantastic vídeo! Best regards from Portugal! 🇵🇹💪

  • @sebastianschlette6639
    @sebastianschlette6639 Před 2 lety +3

    4:30 shouldn’t you pull the long valve rod forward before you unscrew the power plenum? Doesn’t the valve rod get bent every half turn?

  • @DrRSPMD2010
    @DrRSPMD2010 Před 3 lety +1

    Thanks Ernest, that's very helpful.

  • @noelioalves9636
    @noelioalves9636 Před 2 lety

    Sensacional essa carabina, logo logo vou comprar a minha M3 🙌

  • @northballistics
    @northballistics Před 2 lety

    Thanks for this gentlemen

  • @goodboyringo9716
    @goodboyringo9716 Před 2 lety

    Nice video , thank you !

  • @numizaairguns1373
    @numizaairguns1373 Před 3 lety

    Great video

  • @dimawar2328
    @dimawar2328 Před 3 lety

    Thank you for your review

  • @herbertjoyasensi5802
    @herbertjoyasensi5802 Před 3 lety

    nice work greatjob

  • @franciscocarvalho2424
    @franciscocarvalho2424 Před 3 lety +1

    Um fã seu do 🇧🇷 um equipamento esplêndido um sonho. Desejo muito mais sucesso com ela fica fácil uma 🥇

  • @jorcileisousaresende1397

    Pcp com muita tecnologia em breve comprarei a minha

  • @straydog4204
    @straydog4204 Před 2 lety

    I was waiting for you to take apart the macro and micro but I guess not.

  • @Doubledutchguy1965
    @Doubledutchguy1965 Před 10 měsíci

    Hi Ernest, Great video to start with. I have the M3 sniper and want to have the shroud cerakoted. Therefor I would have to get the conus off the shroud. How do I do that? Any info is greatly appreciated. Thanks in advance!

  • @ericsacco7406
    @ericsacco7406 Před 2 lety

    I was thinking of selling my Royale 25 as I can rebuild that down to the reg and I need to do it every 3 years or so. .... YET this M3 looks like a lot of work to maintain. We will see what the leak factor is and how often you need to rebuild. Maybe I should just keep the Royale that really only shoots 24.5 grain JSB's well. It has been a good rifle.

  • @whiteykauai
    @whiteykauai Před 3 měsíci

    2 issues I having trouble with. I don't understand why my new M3 in 35 cal., when I go above 120 on the 2nd reg, my fps drops the higher I go ?My, settings are 185 on 1st reg. 110 on 2nd, 16pw, 5micro and 13.20 on VA. Also, my gun won't de cock or is catching on something. Seems like it needs to be greased. Have you had experience with this problem? Thanks for any advice.

  • @jorcileisousaresende1397

    Ernest Rowe o que vocês achou de melhorias da mk2 para a m3 vale a pena migrar ?

  • @mikaelbackstrom
    @mikaelbackstrom Před 3 lety +1

    I live in Sweden and shoot both stock and sometimes according to swedish laws without a license, 10J. Would it be possible to have one M3 and simply buy some parts and replace them when I want to shoot 10J? I can live with some prepping the day before if it saves me buying two different rifles.

  • @jsemeria6700
    @jsemeria6700 Před 2 lety

    Hi, I have been enjoying your videos. I was attempting to remove the M3 shroud from the barrel by twisting and it unscrewed from the breech end. I removed the barrel/shroud from the rifle but cant seem to unscrew the shroud from the barrel. How can I safely grip the barrel to untwist the shroud? Thanks

  • @luperojas381
    @luperojas381 Před 3 lety +2

    just remember Impact owners if you do this disassembly, you can kiss good bye to your warranties on the rifle...other them that thank you. Señor Ernesto..

  • @alongnek2105
    @alongnek2105 Před rokem

    I want to remove shroud from the barrel but i can't.can you help?

  • @mitsosHT
    @mitsosHT Před 3 lety

    If i want to remove the pressure guages and the black covers are stiff, how do i remove those without the risk of breaking them?

  • @agostinhomalate4086
    @agostinhomalate4086 Před rokem

    Informative & definitely improved my knowledge. Thank you. Where can we buy your C-1 tool?

  • @kenlumhemang7654
    @kenlumhemang7654 Před 3 lety +2

    Why only FX impact, impact, impact why not Dreamline Lite, those who own other than impact we have lots and lots of problems

  • @K1llerElite68
    @K1llerElite68 Před 5 měsíci

    What screw gun is he using? I like that one.

  • @chrishallstrom2518
    @chrishallstrom2518 Před 3 lety

    2 things you didn’t mention lock tight on the C3 or anywhere else?? Could you talk about adding the slug kit..
    can it be done without complete disassemble??

  • @3bdo360
    @3bdo360 Před 3 lety

    I wish I had one of these Impact M3 💔💔

  • @VlantTepes
    @VlantTepes Před 3 lety

    Dear sir, i buy an impact mkiii 5.5mm and from my first shoots the guage of the first reg tremble from 130 to 180 bar and i loose air from inside the barrel. Which might be the problem?

  • @fredriksteen4504
    @fredriksteen4504 Před 3 lety

    How do you diasambel the micro adjungerad

  • @alihagan0
    @alihagan0 Před 3 lety

    I have the mk3 .35cal. I have a small rubber ball leftover after reassembling. Where would that go? I believe it came out during the spring removal.

    • @goodboyringo9716
      @goodboyringo9716 Před 2 lety +1

      The rubber ball goes into the spring under the black valve adjustment knob above the air tank.
      I seen this in a video , type in FX impact M3 slug power kit installation ( M3 slug tune part 1) ..... The video is by Airbuks
      I realize this video is for the slug kit but this ball may go there on your gun , if not disregard

  • @brandonthibodaux7608
    @brandonthibodaux7608 Před 3 lety

    Can u do a video on the MAVERICK

  • @fredriksteen4504
    @fredriksteen4504 Před 3 lety

    Can i buy the c one tool from you

  • @MrSoarman
    @MrSoarman Před 2 lety

    I am getting scared I may have made a bad choice for a complicated air rifle, I will try it and hope I don't have a bad experience, just too many whistles and bells.

  • @Sae-fu5ch
    @Sae-fu5ch Před 2 lety

    You didn’t strip to a bare block.? You didn’t remove the entire quick tune setup plus other bits so technically not a complete disassembly!

  • @jeanfix40130
    @jeanfix40130 Před 3 lety

    Good vidéo Ernest, but .... never forget:
    too much technology on your fx airguns, purchase price too high,
    in short all this too commercial ....
    I just want an airifle good at everything at a reasonable price and easy to maintain.
    2 rifles are interesting: air venturi avenger is one top and evanix rex air tube for power and as a survival rifle.