Impact M3 High Power Tuning - FX Masterclass
Vložit
- čas přidán 1. 08. 2021
- Famed airgunner Ernest Rowe takes you through tuning of the Slug Power Kit of the Impact M3. The slug power kit will drastically increase your speed and ft/lbs of energy.
Sections
Test speed - 0:53
Micro wheel adjustment - 1:31
Valve adjustment - 2:30
Tuning overview - 6:18
Tune Shown In Video
Macro Wheel - 16
Micro Wheel - 3.5
Valve Adjuster - Line 4.5
1st Reg - 185 Bar
2nd Reg - 150 Bar
If you are ever unsure and need service in US visit: fxairguns-usa.com/service-req...
For all other areas outside of the US please visit: fxairguns.com/support/
Thank you. Will help a lot on my new and first Impact.
Thxs for the videos and the time you take to explain the gun. As a added note for others that own this gun, to shoot different pellets/slugs you WILL have to tune it to the pellet/slug you are shooting and also maybe adjust your scope. A lot of airgunners say the H&N Grizzlies are a bad pellet/slug, but I get them to shoot good in my Impact, crown, avenger, and hatsan neutron star. You have to tune the gun for each pellet/slug you shoot, and YES, it's time consuming but worth it. Just remember/keep in mind, that's why you have adjustable regs and hammer springs. That's what makes it fun also !!!
Thanks, Ernest.
Muy buen video como siempre un fenómeno saludos desde ARGENTINA 👏👏👍👍🇦🇷
I love it I love watching your videos
Hi fellow air gun enthusiast. I had a major issue with my mk2. .35. And I was feeling like Fx just really didn’t care about us their customers. Well I have a update. I have been in touch with the good people here in the us offices and we have reached a very amicable resolve. This is one of a very few instances where I am happy that I was wrong. I was treated with the utmost respect and I honestly have only praise to say. Thank you very much without putting peoples names on the net without permission. You three people I spoke with thank you. For your understanding and the generosity of your time and resource.
Wow this is so easy to adjust.
The Impact 3 is a complicated gun, but then I went back and looked at several reviews and figured out why my micro/macro wheel wasn't working. 1st off, it's the 2nd reg that actually controls the fps. I went back and re-set my regs, and I'm now getting the adjustability that you get in your reviews. This is my setup, 1st reg 160, 2nd reg 125, micro on 8 and micra at 3 and now I can get the different fps I desire. With this tune (25 ca 600mm barrel) power wheel on 16 I get 1015 fps, on 8 I get 970, and on 4 I get 945. My valve adjuster is on line 4. I did set the 1st reg on 170, and the 2nd on 135 and I was getting 1080 fps, so that's why I went with the setting I have now. (By the way I am shooting the H&N hunters/hunter extremes 28.20 grains). What screwed me up was the 1st reg. I was thinking the gun was shooting off the reg when it got down to 150. Didn't realize the gun goes off the 2nd reg, which also sets my fps. If I turn the 2nd reg up to 140 I'm getting 1100 fps. THE IMPACT IS A POWERHOUSE AND ALSO VERY ACCURATE EVEN WITH THE HIGHER REG SETTINGS.
Thank you Sir
Good informative video ER, waiting on my M3- maybe after RMAC- like a kid at Xmas- heck of a piece they’ve built this time, and we all know they’ll top this one somehow. Thanks
the best imported rifle products used in Indonesia
Hi Ernest quick question on the barrel are you using the single port (p) or dual port (s) ?
Nice
Greetings to you. What would you recommend the reg. settings to be for a .22 shooting 25.39gr knockout slugs? Meany thanks
Hi, Where can I get the mounting bracket for the chrono? Have not seen that included with the FX chrono.
Aloha Ernest. Do you think it would be worth while to upgrade my FX Impact Mkii 's power plenum to the new 720 power plenum? Thank you and Merry Christmas !!! :)
Greetings to you. What would you recommend the M3. 700mm -
Hi ER, just recieved my FX impact M3 .177 shot JSB from 10.34 to 16.2, perfect shots, but the slugs got it jammed....pls let me know how to clear the jammed barrel....
Wanna get into this but damn pcp is pricey to get started. Beautiful rifle, just gotta keep saving.
That the pellet I'm trying to set, nice to see what settings you where on?