How To Install Lowering Springs On BMW
Vložit
- čas přidán 25. 09. 2017
- Welcome to ShopLifeTV!
In this video I show how to install H and R lowering springs on an e46 wagon. The process is similar for most of the e46 models. If you need help with removing and installing rear shocks, make sure to watch my coilover installation DIY.
The end links that you can use for the front are 2007-2008 Impala SS rear end links.
Coilover Install DIY:
• BMW E46 Coilover Insta...
Merchandise: www.shoplifetv.com
LS3 Swap: / @bmwselena
Vlog Channel: / @moreshoplife
Instagram: @ShopLifeTV
Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product. - Auta a dopravní prostředky
Can confirm, 2008 impala links fit perfectly
Great vid! Love your E46 tutorials, please keep them coming.
Great video! You work your tail off.. Many late nights, it will pay off for you in life! Thanks for sharing and keep up the great work.
Dude, thanks a lot for your videos, infinite respect for your doings
Nice video, I'm getting ready to change out the rear springs on my E36 M3. One of my springs broke. I'm not gonna make a video of it this time, but this was cool to watch.
Yoooo... awesome and very easy to understand tutorial. Buying some Shoplife gear today💯
keep doing what your doing brother... awesome
Nice work and description dude
thank for the info cant wait t o lower my e46
Nice to see one of those chinese strut compressors in action. Another advantage of those is they compress from the bottom of the spring so you can actually compress them enough to get the top mount back on!
Good vid, can anyone confirm on the spring alignment... Basically eibach spring sits naturally better with around a 1 to 1.5 inch gap. Seen some photos where the end of spring is not even visible to the alignment notch!
Great video, love the detail you show. Deciding which cheapish way to go to lower my e39 soon! Thanks
how’d it go man trying to do the same for my e39
Can you please do a video on how to lower an xi. Analyzing different ways and cost. There is no reputable source I found that has a good tutorial.
Great video! I'd like to ask, what kind of impact wrench are you using?
Very cool!!
Awesome vid dude. Tell me, could i fit the sedan motorsport springs onto my touring? Would i have issues with the rear being too low?. They standard bmw motorsport springs
Hi, greetings from Germany✌️ can you give us a little update here in the comments on how the springs handle? Are they sporty and still comfortable for a daily driver? Would you recommend them? Thx
Awesome video Jason. I bought the impala links ahead of time and replaced my coils yesterday but ended up not needing them because they were too short! Why did you suggest replacing those? Your video is the only one that suggests that and I want to know if I should keep them and figure out how to fit them even though they're too short. Thanks in advance and keep up the great videos.
Where to purchase adjustable links and do i absolutely need to change the shock mounts
i got the same springs for my e30 did they help with getting rid of most of the body roll?
5 inches of clearance, that's on a wagon. I'm gonna get H&R for my 323i sedan, will be perfect for here in NC. I'll be saving this video for when I get them
Have you got an update on how low the car is sitting now after settling or is it still the same height from when you installed it?
what sway bar endlinks brand are you using?
I have a 2006 BMW 325xi and was hoping if you guide me which one I should go for, either coilover or lowering springs. Coilover set is Bilstein B14 performance coilover kit for $814 vs H&R lowering springs with B8 shocks for $985. I want to lower my car but don't want to lose the comfort since it's my daily.
you can use the oem bmw jack to spread the rear spring holder to make it easier and faster!
I always seem to snap the drop links doing this - maybe ‘cos I’m only lifting one corner at a time?
Is this same routine for doing the rear of a 2005 318ci convertible?
couldnt get the springs off the 2014 X6 E71.
need the right spring compressors for sure. any suggestion? most are too big and there's too much shit going on to line them up
I'm about to do my springs with eibach sportline on my stock struts for now cause I don't drive my e46 that much.. question is do I need to cut my bump stops as well ? Like completely off or ? I tried to research it
thank you!
Ur the holly grail of e46
Can i use rwd spring on awd e46? I want it sits more lower
Yeah, what year Chevy Impala for those sway bar links?
Hello, i have a BMW E46 Compact with a broken Sunroof, i want to comfort open my windows with my key but it opens the Sunroof too, if i would take out the fuze for the sunroof so that it can t get any power, would that help in my situation ??
Hey wats up man I I got a 04 e46 I just got some 17x 10 wheels on it if I put this lowering springs u think they won’t rub
Quick question: is it okay to run different heights for rear upper spring pads between left and right sides to counteract the droop on the right rear of the car?
E.g. a 5mm on the left rear upper and 15mm on the right rear upper
What is your recommendation to lower my x1 f 48 diesel
Can you type the materials names please. What i need to change the coil springs on my bmw 645ci 2004.
How much do charge for spring install on a 2014 X3?
Hey bro I've been following for a while, I am getting ready to swap the engine in my 330xi with another m54b30. Only differences I'm seeing off the bat is the oil pick up tube for the dipstick, the coils(ignition), and the oil pan. I just need a blueprint to go off of to get the swap done.
For ex.
Remove driveshaft
remove transfer case
blah blah, i'm not finding much info on it to be honest and I want to go into this swap prepared.
Also what do you think I'll need to buy or what would be good things replace while i have the engine out. I'm starting it tomorrow, so thanks in advance man, just in case you actually see this. (:
What is that spring sitting on, what’s it called?? Lower control arm? It’s like a bucket for the spring
For the sway bar links, you mentioned Chevy impala but what year though?
Same question I have
I put in tein- s lowering springs on, hear a clunk from right side any clue what it could be
WHATS IS MEAN 40/30MM SPRINGS? HOW TO KNOWN MEASAURE FROM FENDER OF CAR TO TIRE OR RIMS?
Good vídeo ....where is the vídeo for change diferencial bushing BMW e46 328i 1999
The Bob Ross of E46’s
Part # for the adjustable end links please? And thanks for the video
What year impala for the sway bar link
thank you, my e46 m3 coupe was similar so i did it brother
PLEASE HELP BRO, so at 4:45 you took the wheel off and that spring is sitting on something
Can we get a guide for the XI! Iv owned the Xi forever & really wana lower it. IDK what is req
Meow
Just lowered my xi. It was the same as this
Lowering xi is a terrible idea. The front axles will break prematurely because of the angle of contact. If you wanted a low car an awd bmw is not the best choice
Could I just pull coils out and cut them down?
Nice! I actually want to do the opposite of this. My ZHP coupe rear is sitting quite low for the 265/35/18 tyres plus 10mm spacer and the tyre rubs the fender. Can't tell if it's the sorings that are weak or the struts are. Also do not know if there are opposites for lowering springs. I ordered a fender roller but haven't felt comfortable tampering with the shape of the car yet
Would definitely recommend rolling fenders or getting rid of the spacer.
I'm trying to achieve a flush look, hence the spacer.
so, can you give us specifically what swaybar endlinks from a caprice you are talking about? thanx for the vids. tony
Tony Veale an answer to your question would have been outstanding. Wish he would reply (hint, hint).
2007-2008 impala ss rear end links
Thanks bro
Endlinks are a good topic of disscusion. I feel you kinda glossed over them. But, its great that you found links that are shorter and fit! I'm glad I watched this video and thank you for making it.
I know this isn't a froum. But, since people are watching I wanted to add - since endlinks are set at a specific height, shorted endlinks would be for a specific drop. from my understanding, what matters is the angle of the end link to the ground, as close to perpendicular as you can get so that the oppositional force is exactly upward and downward respectively. Any angle would push the bar not exactly up/down and would stress the tabs on the struts in those directions and make the sway bar's design physics to function less, kinda like making a 23.5mm bar function as a 20mm bar. The goal is to get the angle perfectly straight up and down, or as close as possible.
The other issue is preload, where over or under length would apply a force while in resting position to the compression of the bar, as it is esentially a spring. The goal is for the bar to be relaxed at resting position, so length in also important.
The length and angle are related to the installation. If the endlinks sit straight up and down, not angled, the length and angle are fine. This is because the sway bar is fixed, unless you have an adjustable sway bar. If the endlinks are not straight up and down, you may need adjustable set depending on far from straight up and down they are.
Small drops in ride height usually dont require adjustable endlinks. However greater than 2 inch drops usually do require adjustable endlinks. In addition, they would usually also need adjustable tie rods, but that's another story.
Great vid like always , A recommended vid for you to do would be an oil pan gasket replacement. Maybe you'll have one coming up with that $800 dollar BMW that you bought.
Anyway great video!
Where in Cali are you located
What is the downside of using the stock swaybar links with lowering springs like these?
They will wear prematurely.
Hi, what YEAR Chevy impala, rear sway bar links, do you use on the front on the bmw, thanks!
2008
Which springs can I use for 330xi ?!
Check on ecstuning, make sure they are compatible with XI
So what's the answer to the question everyone (including myself) about those sway bar links? What year Impala specifically?
2008
thank you. i have a 2015 X1 and want it to look a little lower and maybe a little wider nothing dramatic but a little more aggressive stance. i currently have the stock 17 wheels with 225 50 17 tires...thanks for suggestions.
Do you need an alignment after installing lowering springs?
yes
Yes please do that! I forgot about it and could throw away 2 tyres because the inside of the tyre was complete worn away while the outside was just fine.
Una pregunta cómo puedo levantar mi carro 2 o 3 pulgadas es un bmw 2002 325 i
Necesita coilovers
60/40mm?
Hey! Could you potentially do a video about rear bushings, link arm bushings on an e46? Great video, props from sweden.
bySumar they're usually not a problem on the E46 chasis very rarely in my time working on cars
HELLO MO VLOGS
sell me those springs after you're done with them, got an '03 325xi
Can a bmw 325i engine will fit a bmw 325xi 2005?
Its same engine ofc
Guess meand my 325xi gotta keep looking for information.
Hi. I have an E46 2004 325i ..right hand drive .I live in Australia. I have fitted Eibach pro kit springs on my car..why does car sit 10mm lower on the drivers side only is.. this normal
Hi I've been trying to figure out how why my headlights blink can you help me with this problem I have a 330xi 2001
Take masure from thr midle of tyre
Can you do a turbo install for a 325 M50 motor?
Why did you make this video if u can't just change the springs and it will break soon after the installation...
Bro you need to let the springs break in for a couple of day or week to really see the difference of drop
That's what i said in the video, it doesn't take a week. Usually within 24-48 hours if driven on.
just take a couple of speedbumps
Can you install my lowering springs? Lol
yes if you are in California lol
ShopLifeTV sick! Where is your shop located?
in Alhambra, CA dm on instagram to make an appointment @shoplifetv
you dont need to replace anything, stop misinforming, this can be done with just springs, replacing shit is up to you.