Making revers trike to Have Fun :D
Vložit
- čas přidán 23. 09. 2023
- amzn.to/3SUHc5M - Parts list
s.click.aliexpress.com/e/_DnC... - Led lights
In this video we will show you how we built a three-wheeled vehicle that will allow you to have some fun on side gravel roads, dirt roads and more.
We used, among others:
250 CC engine with manual gearbox (4 forward and reverse)
The wheels and front suspension come from some ATV 110
Rear wheel size 18x9.50-8 used on ATV 250
Check out our other videos:
• Cutting Steel easier t... - Cutting Steel Using Wiper Motor
• Making 14 Hp Brush Mow... - Making 14 Hp Brush Mower - using Lawn Mower parts
• Custom Trike: Motorcyc... - Making Suzuki Road Trike (reverse gear) - Auta a dopravní prostředky
amzn.to/3SUHc5M - Parts list
www.amazon.com/shop/madeinpoland - Equipment and tools we use
s.click.aliexpress.com/e/_DnChvgt - Led lights
#
S 7ème ygp
E1311}@@fantacamra428
Wsssस,त्वa❤❤ as@@rominamendoza1736
😅😊😊😅😅😅😊
I don't know how much you weigh but, the scooter doesn't LOOK that strong. It IS amazing that you can fabricate all those, various parts by yourself. Wow!
FrankenTrike. What a blast~ Love that you don't include annoying music and pointless dialogue in your video. Flexiny would approve.
As a professional Maintenance Mechanic /Technician, whos hobby is mini bikes (I own a Coleman cc100x with predator 224cc swap) this was a fine specimen of an Epic home-made build. Rarely am I absolutely RIVOTED for an entire build video. The finished product was truly artwork. I think this trike is easily worthy of applying for a patent, and producing these for powersports stores. They'd sell for sure. Amazing job man. Truly inspiring. Keep at it. 👏👏👏👏
OK here's the deal it's kinda koul but it's to tall to short length wise and to slow for his big butt. and the front end is to narrow. but other then that's it's pretty koul and he did a killer job from scratch. for a starter trike
The creativity in Eastern Europe is sometimes mindblowing.
Bulletproof project justification, hard for the wife to argue against that one🤣 Bro your work is so pro! Great looking machine, thanks for sharing!!!
😂😂😂😂
You know you're famous if you have your own bearings!
😂
Great job, what a fun machine!
👍👍👍
Idk about being famous with the bearings. There called 'flanged pillow block bearings' & you can order all kinds of different sizes online, or go to bearing supplier local to you! 🤔👍👌🛠️🔧🔩📐📏🗜️
Now to make one from a Hayabusa, that would be an ultra fun off road toy.
Good job Dude although I reckon a gusset under the seat would strengthen the shocker mount in case the shocker bottoms out
Cheers from Aus
This was the best intro to a video of all time.
As always, you have all the necessary skills to do the job right. Well done.
Excellent. I’d look at bracing the seat bracket before the rear suspension bends or breaks it.
a high-quality product.
I love you Poland.
In South Korea.
I loved the crash sound there towards the end of the video! LOL.
Great trike, and with reverse gear too, well done!
ync9rjx🎉😢
Вот мне сейчас 50 с лишним лет. И твоё видео автор. Я смотрел с большим удовольствием. Даже карта с удивлением 😮😮😮. Сделать такое в домашних условиях это 💪💪💪.То что ты сконструировал. Мне понравилось 😘😘😘.Очень сильно понравилось. Как слышал выражение слово круто. Мне круто понравилось 😍😍😍. Шикарный аппарат получился. На мой взгляд. Классно 🤔🤔🤔.Я твою эту работу считаю работой мастера. Молодец Браво. Это у меня вызывает уважение к тебе. Как у нас говорят у тебя золотые руки и светлая голова. Это тебе по праву. Держи лайк и не только. Заслужил.🤗🤗🤗👌👌👌👏👏👏👏👏➕➕➕➕➕💯💯💯💯💯✊✊✊✊✊👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🙏🙏🙏.
I love the expression on your face when you realize your mono shock was too soft :-) you’re doing a wonderful job keep it up!
Great Job Sir
This is the miracle of brain Power from the precious brans God Almighty gave us .. Hard work and resilience
Following from Cameroon Central Africa
Классная техника получилась. Вам удачи в делах
*Молодец. Браво. Лайк. Пламенный привет с Татарстана г. АГРЫЗ РОССИЯ*
Od razu widać profesjonalizm całej pracy i dbałość o szczegóły 👍🏻
❤
I want to see you guys do something with a snowmobile drive train, like a half-track. But this was fantastic, even if it looked a little scary to ride.
Predivno, svaka čast na trudu i znanju. Veliki pozdrav iz Hrvatske.
Молодец все четко бомба ракета не помешало бы щитки на колеса особенно на заднее , и покатушки можно делать и дождь и в снег 😊
You forgot to add the basket in the back 😅
greetings from russia!
you made it look so easy, although i understand it wasnt a 30 minutes project
good engineering decisions, eveything can be repaired and disassembled, complete rear suspension instead of hard tail, etc
Автор мастер на все руки, но мало знаний по физике и техмеханике - очень хлипкая конструкция для такой массы и мощности, я бы не рискнул на ней разгонятся ..
Now that was a slick build !!
Finally a really deatailed long video! The bike was very well made. I'm sure it is fun to ride with.
Man there’s some work in this , you’re on a different level mate ! Awesome skills .
ДАР ОТ БОГА!!! ДА И РУКИ НЕ ИЗ ЗАДНЕГО МЕСТА РАСТУТ. РЕСПЕКТ И УВАЖУХА!!!!
As usual, you've done a great job! It looks great, rides really well and seems to be a lot of fun.
One question though, where is the place for your angle grinder? 😅😅😅
I forgot 😅🤣
@@MadeinPolandChannel😂
@@MadeinPolandChannel привет Брат Как Вы там Я из Таджикистана Ви из Польши??
@@gregorderhobby-heimwerker2471🎉ಚ್ಯಹ್ತಪ
Awesome trike 😀 Good job Buddy 😁
Amazing job my friend congratulations 👏🎊👏🎊👏🎊👏🎊👏👏👏!!!!!
very very professional and I definitely love this job and I'm also building a supercar for myself. I learned a lot in the village.
Nice Build and Nice Place!!!
Thanks man!
WhatsApp number to contact
Awesome Trike!! Maybe a mud guard for the back!!
Красавчик, братан. Руки из плеч.
What a wonderful break from reality, watching a young man build a trike using his amazing skills, knowledge, arsenal of tools and equipment.
Thank you!
Blessings.
Have fun
Hello sir I thought that rear wheel get little bit more distance but your work is really like a superman
Daruz sei davvero un ragazzo fantastico. Hai una testa geniale. Ho imparato ogni tuo video a memoria. Il tuo canale è per me fonte di ispirazione ma che purtroppo si ferma per via delle costose spese che occorrono. Complimenti 🎈
I enjoyed watching the build process [as always] but I did notice a few things. I mention them as an observation vs criticism. I believe it would ride/handle better if:
1] The center of gravity wasn't as high. 2] The rear swing arm was lengthened 8"-12" [20.32cm - 30.48cm] jmo. Again, really enjoy all your videos. God bless.
He missed a couple steel pieces for the back end for the seat so it does not flex with the shock and for the rear swing arm need more brackets on the connection point so it does not twist ...If he hits a good bump the shock will go right thru you sorry ..Back end not strong enough .....And swing arm should of been longer for better handling ...
Молодец! Золотые руки!
It's great trike
Hopefully, the engine mount got the rubber to reduce the vibration, and some reinforcement on the seat platform, like a triangle maybe?
Very good build, good quality on materials, parts and welding tecnique. All you need now is a luggage rail in the front and you created a really mean flatbed moped. I built one out of a honda 550f and front carriage from a vw polo back in the eighties. But it was too big, this one is the perfect size. Well done!
Fajne wejście i kolejna super produkcja. Miłej niedzieli i pozdrowionka.
I najlepszy Polak w akcji :D
@25:17 Master link keeper! You are putting it on backwards. The "nose" of the chain keeper should always be pointed in the direction of travel. Threaded rods do not make very durable drive shafts. 🙂 I still LOVE it!! 😍
Hello, you made a wonderful thing. What do you spray before welding?
That's what I was wondering. Never seen that before.
fantastic build. really like the look. Very Cyberpunk
Muito bom mesmo, parabéns pela genialidade.
Very well, a professional manufacturer, but my humble opinion is that smaller tires will give torque but not speed. The appropriate large tire must be installed for the engine.
Great Build! It looks like a lot of fun, thanks for sharing.
Nice Bud, your fabrication is legend!!
well done! very cool, but there are 2 design errors:
1. the pendulum will break off at the point of attachment to the axis. the isthmus from the pendulum to the tube on the axis of the pendulum is too narrow.
2. this will cause the subframe to break off. it should be reinforced with inclined supports to the frame so that they form a triangle. or scarves made of thick metal in the place where the stretcher is attached to the frame.
отличная работа! очень круто получилось, но есть 2 конструктивные ошибки:
1. отломает маятник в месте крепления к оси. слишком узкий перешеек от маятника к трубе на оси маятника.
2. отломает подрамник. ее следовало бы усилить косыми подпорками к раме, чтобы они образовали треугольник. или косынками из толстого металла в месте крепления подрамника к раме.
Sweet project so curious what size engine was that ? Im guessing a 300cc ?
Simplesmente incrível, esses projetos de motocicleta , mini carros ...... acho incríveis , parabéns , ótimo trabalho , gostei , continue com esses projetos , belo trabalho !
Po prostu ogień 💪 Gratulacje talentu!
Nice work, colleague👈👍😉
Great skills and a great build! Thank your fir sharing!
-Rob in Tennessee USA
Sick little machine, dude! Fantastic work!!! 😃
Stay safe there with your family! 🖖😊
Siemano, fajna maszyna 😀
24:34 a czy te dwie śruby łączące te zębatki wytrzymają dłuższą eksploatację?
Pozdro 👊👍
Myślę że nie , ale to pewnie zamysł konstruktora , rodzaj wentylu bezpieczeństwa , jak dasz za dużo miodu to zerwie śruby a nie ukręci się coś innego powodując poważną awarię
Fantastic job here!
I suggest you add a front bumper and a plate on front of the handle bar or just add lights there which I recommend.
Another well engineered skillfully crafted project. Looks fun.
Si df hheksldmdbc🎉df❤😊🎉jfhdhduddmbUgzyusndbvfhrbrb
Dnfbbdbevgdye
Nice job man. I really liked the tensioner desing and how you decided to add better threads to hold more torque. Welding nuts like that not only benefits for more durable threads, but gives you galvanized threads :) awesome job!
And also zinc poisoning if not ventilated property
Coisa linda ! Digna de um Samurai, parabéns amigo vc é um talento nato!
Nice job and design.
Jak zawsze filmiki na dobrym poziomie :)
If you don't make mistakes every once in awhile, you're not a Real fabricator. That's the only way to learn. I'm a self taught welder. I'll go to the big box stores, see something I like, take some pictures and go home and make it. It's fun. It also can be very lucrative. From 1 fabricator to another GREAT JOB 👍👍.
Ko
AWSOME build brother 👍 👌 👏
Кашкет з Пропелером просто Супер !!!! 😊
Мечта сбылась своими руками и оно того стоило 👍👍👍😎
You make it look so easy! Do you make plans ahead of time or do have an idea and fabricate as you go?
Another great build! Really enjoy your channel!
Thanks!
I often make auxiliary plans to save time and check what something looks like on the computer before I do something physically 🙂
Looks like you are going to have to put some fenders on that machine. Otherwise wear a water proof suit when you ride it. Thumbs Up!
On your mig welder are you using flux core wire
if so what are you spraying on the metalwork before you weld it
i think it's so that there's know spatter from the welding, could you say what you use and what
And why your doing it thanks
Czekam na projekt przedniego ładowacza do waszego traktorka z euro ramką oraz podłączeniem hydrauliki, wierzę że się doczekam! ✌️💪🇵🇱
AAAaaaAAaaaaaaAAaAAaaaaAaaaaQap0aiq vip
Super pojazd. Dobrze że nisko ma środek ciężkości Pozdrawiam
What do you spray before welding?
Great build! I’m curious as to what the spray is for each time before you weld? Maybe to reduce the damage from welding slag? Greetings from Ohio in the USA!
It is Best Weld anti spatter spray :)
Sweet 👌... What are you spraying before welding?
That’s the first 40 minute video I’ve watched in a while. I loved it. Great job.
I’ve been thinking about building something similar. I think it would benefit from a little bit wider wheel base. Great work.
I'm really glad that I'm not the only one who makes silly little mistakes every now and then while fabricating. If you do it as well I somehow don't feel as stupid.😁👍
There is an old saying: only the one who does nothing, doesn't make any mistakes. Happy tinkering! 😁
@@ogi22golden words 🤔🫡
That's life mate, no body makes perfect measurements everytime
@@gembaasgsfá😅m9 😊
@@jonathangofast559 There is an engineering joke about that too:
2 plus 2 is equeal to 5. For extreme values of 2 🙃
Not sure why you would want that but it's a neat build from a fabrication standpoint.
With dirt roads here that could qualify for trailing, I'd like to have one
Jak się ogląda Ciebie przy pracy to wydaje się wszystko takie łatwe, że naiwnie można by pomyśleć, że roboty jest na kilka popołudni. Ile czasu zajął Ci ten projekt? Efekt jest naprawdę ładny - nie tylko działa, ale ma też fajny wygląd.
Pozdrowienia.
Jakieś 150 godzin 😉
@@MadeinPolandChannel comment faire pour passé la commande je suis en Afrique
Nice! My analogous project with a track instead of the rear wheel is stopped so after watching your video I need to proceed :)
Anyone who does this kinda extra curricular activity is amazing!
Hell yeah brother Awesome build... wazzup from Pensacola Florida
Teraz pozostaje pościgać się z Majstrem Wazzupem ;-)
Brother man !! You're a literal beast in the garage.. everybody makes "mistakes" but the way you problem solved them with no effort, although they weren't really mistakes haha.. crazy this is, ive been talking about getting a welder to build some mini trikes to sell. I was stoked when i thought about two wheels up front and for me to ride.. anyway, days later i find this.. thanks bro ! You definitely get a sub from me
You forgot the wee bucket on the back .that had all your tools in . .. 😂
A very extraordinary idea. I am amazed by my boss's successful skills ❤
What's the spray you use before welding?? What's it's purpose?
This was cool project , was any caster put in that front end .
По полям ,по лугам едет синий Мотул к нам !!!!Классммм!!!!!
Amazing craftsmanship and creativity … 🎉 Awesome n enjoyable video … keep them coming 😊
All looks good and fun but you have put the retaining clip for the chain link on backwards
I'm really glad you did so well! It looks great, drives great and seems like a lot of fun.
However, aren't you afraid that the police will confiscate your car 😅😅😅
What are you spraying on the steel before you weld
What did you spray on those parts?