Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Pakistan can do too. Blessings from the UK.👍😉🇬🇧💯
These guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.
The best thing about this machine besides the workers that produce it is that almost everything on this motorbike can be fixed by the owner with just basic tools.
For your information, Model T Fords we’re built by the millions using a big hammer, torque wrenches and robots were never put too use. Isn’t that amazing ?😉
Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Pakistan can do too. Blessings from the UKThese guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.Exceptional work. Clean shop, people wearing shoes (uncommon on many CZcams Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!
In Sweden they probably go as MC. 3 wheel's or more on a bike you only need Car driver license (B). Even if it look like a motorcykel with dual front wheel together, it also go under Car driver license. Only bike with 2wheels need MC driver license.
Exceptional work. Clean shop, people wearing shoes (uncommon on many CZcams Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!
Pakistan can become a Rich Country if they seriously get these machines certified and sell at mass scale all over the World, specially the developing countries. These vehicles are very economical to buy, and very cost effective to maintain. Just like Japan, Korea, China made cost effective reliable cars Pakistan can do the same with such vehicles and market it to developing countries.
The way they install bearing and races makes me cringe. It's not tapping on the bearing with a hammer, It's where you tap on the bearing that matters. The way most of them were installed will cause premature wear and failure.
You buy one of these, you know you're buying a kit, just like Chinese machine tools. Decent starting point, as long as you know that you're going to have to put some labor and time into it to make it perfect. It all depends on the price point.
I am rather horrified watching them use a hammer to install bearings especially the taper bearings and then use an air gun to finally ruin them ……hope the warranty covers bearings !
Hey, Mr. Perfect. What a genius you are. You should question how many of those they sell. In India they do it to last, unlike some countries they built throw - away objects ! Understand ?
@@AngelPerez-pd1zi De opmerking betreffende het monteren van lagers heeft niets met perfecte te maken , allen het juiste gereedschap gebruiken , is veel efficiënter qua tijd , en het voorkomen van klachten achteraf . De neerbuigende opmerking Mr. Perfect is derhalve misplaatst . Maar ik vraag me af of je het zelf snapt .
@@AngelPerez-pd1zi You must watched the wrong video. What you see here, is anything else but built to last. Probably, the demand of the market for this kind of stuff is big, so, they offer more cheap quantity, and less quality. And when the customers have little to no alternatives, they would accept these pieces of junk.
Here in the Philippines no problems and they are long lasting use . I see these everyday everywhere I go and the majority are for businesses . Many here are older models if that matters ,idk.
How tough is that 150cc single piston engine? There is a lot of weight there and it has a truck bed to fill. This is the best built tuk-tuk I have seen so far on video. Well done .
I think if these guys worked for a large automobile manufacturer in the USA, that plant would probably produce the best cars in the world. These people looked dedicated 😊
Never saw a torque wrench and some of the ways that bearings were hammered can damage them., but then again most of these vehicles don’t go faster than 25 Mph.
❤❤ gostei do trabalho de voces top 10 so me diga o lugar e na India é parabens,otimo trabralho deveriam vender para o Brazil pro pessoal da roça seria muito útil top 10
6:56 для тех, кто забивает подшипники в посадку молотком в аду подготовлен отдельный котёл, и для хозяина производства, который пожалел денег на гидравлический пресс
тебе то какая разница. Ты на этих драндулетках вряд- ли будешь ездить. А у них там и так сойдёт. Ну, а уж если судьба тебя с этими повозками столкнёт, то у тебя будет охуенная возможность купить гидравлический пресс и перепрессовать все подшипники.
It amuses me to see the torque specs in the bolts. "What were these torqued to?" Yes. The are torqued. "But to how many foot pounds or newtons?" Five ugadugas, bolt's not moving is it? Then it's torqued.
What h.p. does the engine put out ?. Looks a very simple and useful little truck designed to work in its own environment. Not the expensive production lines seen in the West etc but correct for the country it is built in, everyone busy and knows their job.
So , when DO THEY finish all the welds on the frame ? The videographer has only recorded 'SPOT' welds to hold all the formed metal pieces of the frame together !
Tacked together on the jig, welding is completed on the floor out of the jig allowing access to parts that require welding. Some dimwit makes as similar comment on all these type videos. You need a several hour long video to show the process in its entirety you twerp.
That looks like a well made machine that will give lots of service. I would say that on the tailgate, I would change the two panels that cover the tail lights when open to a wire mesh. This way they can be seen if you are carrying a load with the tailgate open. A small thing. Otherwise, I would buy one.
This reminds me of a place I worked in when I was a boy. Catch your breath for two seconds and some bastard wanted to know if you had nothing to do. Nice product though.
More proof that there are skilled workers all over the world, not just in the West. Maybe even more skilled due to limited automation, i.e. welding robots, automated assembly machines, high tech measuring and volumetrics gauges and measuring tools, automated assembly line conveyors, ergonomic tools & chairs, etc.
عمل جيد بكوني صانع في مجال المقاييص الذي تتركب عن بعضها Bien fait, car je suis un fabricant dans le domaine de la découpe et de l'assemblage de pièces pour fabriquer quelque chose du genre
GuD Work with Less Possibilities ... Is one fan enough for cooling the Engine, Especially during summers in Pakistan, when the outdoor Temperature crosses 50*c .. ?
When do they start shipping to Australia? Awesome machine, and an awesome team building them! (some of the welds on the sub frame need attention though) 👍
hmm not so sure about those engine mounts I think those bolts need to be shouldered bolts so the engine actually sits on the springs instead of be pulled up hard
Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Pakistan can do too. Blessings from the UK.👍😉🇬🇧💯
//;*;;*;;*;;;*;;*;😊😊.//.
Я строитель вы так ремонты делаете как китайцы собирают дешёвый транспорт .😂
Without Robots ! Great work you guys !!! 👍👍👍👍👍
Get a grip. Crap assembly protocol. Everything put together with a windy gun. No torque wrenches in sight.
@@multirichard007 our western world is madly over developed
Thank you 🤗
@@migelsanders4956 your western world is nothing compared to China. you are just third world countries
preferisco i robot. I saldatori vivranno poco.
Ооо!А молоток,настоящий,слесарный,с трубой привареной,вместо рукоятки...
Таким можно даже болты забивать.
Молотки, хитросваренная приблуда - и работает, просто страшно представить что на ВАЗе делают... ( может тут не воруют)
@@user-ub5ky2ur8bто что на вазе делали , до сих пор ездеет 😅
Да! Как же им далеко до Автоваза!!!! Или вазухи до них!!!
Very nice little machine.
Well made and will give years of reliable service.
Well done guys 👍👍
Thanks 👍
These guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.
I want one so bad very cool great skill and time keeping by everyone 👍🏻
Come get it
Would be perfect on my small farm to replace the Yamaha Rhino I now use with a trailer. A side by side version would be even better.
A factory with floor and workers with shoes. Amazing.
aND nOT wEARING dRESSES??
🤩🤩
What a stupid thing you wrote.
@@user-vy6ev8kq3s aRE yOU sTILL lEARNING tO wRITE?
Does their dark skin scare you too?
The best thing about this machine besides the workers that produce it is that almost everything on this motorbike can be fixed by the owner with just basic tools.
Yeah exactly
@@atomthings7923do you export it to the UK if yes how much is the price I think a few people would like to get 1 of them or even different ones
I WANT 1 WERE CAN I BY 1 NOW 😅😅😅😅
При помощи кувалды и индийской матери,смастерили классный драндулет....😁😄😃
//;*;;*;;*;*;;😊😊//.
🤓
It is amazing what has been developed over the years! How machines and jigs to precisely produce anything in such a short time!
True
LAL DIN LD 150 complete manufacturing process. It's a perfect ingenieeringsproject. All workers are masters. Simply genial!
Exactly 👍
This is more of an Assembling Job of readymade sub assemblies... not manufacturing as such !!! Good Job 👌👌👌
Wow, thanks!
IF I HAD'NT SEEN THIS WITH MY OWN EYES I WOULD NOT HAVE BELIEVED IT,,SUPER AWESOME
🫡
The engine seems a bit small but for this type of vehicle speed is not a priority as long as it moves goods and people it has it's place
Exactly
For your information, Model T Fords we’re built by the millions using a big hammer, torque wrenches and robots were never put too use. Isn’t that amazing ?😉
//;*;*;;*;;*;*;;😊😊!!!!!!!;;¡¡//.
EXTREMLEY IMPRESSIVE. SO COMPLETE AND THOUGHT OUT. WOW WOW WOW.
🫡
Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Pakistan can do too. Blessings from the UKThese guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.Exceptional work. Clean shop, people wearing shoes (uncommon on many CZcams Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!
Thanks for watching full video hope you enjoyed
such a clean organized factory i suppose they would be classifed a motorcycle here in U S A would be neet to own one wow great job
Thanks for watching
Great video 📹 👍 can't wait to buy one 😊ok have a great day 👍 😀
In Sweden they probably go as MC. 3 wheel's or more on a bike you only need Car driver license (B).
Even if it look like a motorcykel with dual front wheel together, it also go under Car driver license.
Only bike with 2wheels need MC driver license.
Me gustaría tener una maravilla de esa... Están buenas.
Come 🇵🇰
Felicidades ESTA HECHA PARA TODA LA VIDA SUPER,👍 5⭐
Thanks
Exceptional work. Clean shop, people wearing shoes (uncommon on many CZcams Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!
Great suggestion!
ماشاء الله تبارك الله عمل ممتاز ❤❤❤❤
The frame looks strong enough to support a lot of weight. And it probably will.
Yes it is Google some pics of loader rickshaws and watch how much load they can bear
That's a 'full floating' axle. Suitable for 3/4 ton. But they will certainly overload it.
Wow I like it s use for farming very nice
So nice
Даа. Этот аппарат неубиваемый! 👍👍👍
👀
Pakistan can become a Rich Country if they seriously get these machines certified and sell at mass scale all over the World, specially the developing countries. These vehicles are very economical to buy, and very cost effective to maintain. Just like Japan, Korea, China made cost effective reliable cars Pakistan can do the same with such vehicles and market it to developing countries.
❤️
прикольный джип!
Thanks for watching
The way they install bearing and races makes me cringe. It's not tapping on the bearing with a hammer, It's where you tap on the bearing that matters. The way most of them were installed will cause premature wear and failure.
You buy one of these, you know you're buying a kit, just like Chinese machine tools. Decent starting point, as long as you know that you're going to have to put some labor and time into it to make it perfect. It all depends on the price point.
I am rather horrified watching them use a hammer to install bearings especially the taper bearings and then use an air gun to finally ruin them ……hope the warranty covers bearings !
its pakistan ..u should raise the level of horror ..
Hey, Mr. Perfect. What a genius you are. You should question how many of those they sell. In India they do it to last, unlike some countries they built throw - away objects ! Understand ?
@@AngelPerez-pd1zi De opmerking betreffende het monteren van lagers heeft niets met perfecte te maken , allen het juiste gereedschap gebruiken , is veel efficiënter qua tijd , en het voorkomen van klachten achteraf .
De neerbuigende opmerking Mr. Perfect is derhalve misplaatst .
Maar ik vraag me af of je het zelf snapt .
@@AngelPerez-pd1zi You must watched the wrong video. What you see here, is anything else but built to last. Probably, the demand of the market for this kind of stuff is big, so, they offer more cheap quantity, and less quality. And when the customers have little to no alternatives, they would accept these pieces of junk.
Here in the Philippines no problems and they are long lasting use . I see these everyday everywhere I go and the majority are for businesses . Many here are older models if that matters ,idk.
Молодцы парни, работают, без устали, даже побриться не когда!
Thank for watching
How tough is that 150cc single piston engine? There is a lot of weight there and it has a truck bed to fill. This is the best built tuk-tuk I have seen so far on video. Well done .
Great point! But it can load a lot of weight I watch them daily
I think if these guys worked for a large automobile manufacturer in the USA, that plant would probably produce the best cars in the world. These people looked dedicated 😊
🤷♂️
Owns and manufactured in India.
Never saw a torque wrench and some of the ways that bearings were hammered can damage them., but then again most of these vehicles don’t go faster than 25 Mph.
@@imfcalif4nia543, This is NOT India, but in Pakistan. Lal Din is Pakistani Brand.
Amazing! Where is this company? Can I buy one of these vehicles?
It’s in Pakistan
In India
@@amar6996, Look at above, atomthings7923, he is the one who posted it. Why you Indians have to lie so much. This is not India, but in Pakistan.
Wow, one of them actually had a welding mask!
👀
Tuk Tuk rules !!! Incredible value
Yeah 👍
Great technological advance here off the floor onto work bench
Parabéns pela linha de Montagem, tudo feito perfeitamente.
🫡
Someone needs to show the man in the orange shirt how to put DECALS on correctly. Pride in your work is a must for advancement.
Excellent presentation. Liked, subscribed, and rang that bell.
Much appreciated!
I like that back axle tube has a brace piece over the welded joint!
Thank for watching 😍
Robotlarin issiz kaldigi yerdeyiz Erol
😎
looks like it's the same crew from start to finish , Great job
😎 thanks for watching
that is a really well designed strong chassis!
Thanks for watching
Сборка оставляет желать лучшего, молоток всему заводу осуществляет пресс аппаратуру😅
👀
It well made,these guys are very good
❤❤ gostei do trabalho de voces top 10 so me diga o lugar e na India é parabens,otimo trabralho deveriam vender para o Brazil pro pessoal da roça seria muito útil top 10
No eso India, eso es Pakistan.
Well-run, clean shop with skilled workers! 👏👍 Workers wear PPE, i.e., boots, safety glasses , hand protection, etc.
You got that right!
6:56 для тех, кто забивает подшипники в посадку молотком в аду подготовлен отдельный котёл, и для хозяина производства, который пожалел денег на гидравлический пресс
тебе то какая разница. Ты на этих драндулетках вряд- ли будешь ездить. А у них там и так сойдёт. Ну, а уж если судьба тебя с этими повозками столкнёт, то у тебя будет охуенная возможность купить гидравлический пресс и перепрессовать все подшипники.
@@asami422 а ты что адвокат, что за рукожопов вписываешься? лругой вопрос, что я бы не купил эту хрень, даже если бы мне доплатили
@@Ciaphas-Cain не, мне просто и ты и эти драндулетки похуй.
... ну а што 😀?! запрессовка подшипника и настройка дифференцила - всё его величеством Молотком !! Класс !!😅
i love this sh*t, lol
It amuses me to see the torque specs in the bolts.
"What were these torqued to?"
Yes. The are torqued.
"But to how many foot pounds or newtons?"
Five ugadugas, bolt's not moving is it? Then it's torqued.
🤔
Torque wrenches are for mechanics who think they know what they’re doing and want to look like it.😂😂😂
BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI
❤️❤️❤️
I am really impressed greatjpb
Thanks for watching
great job guys , looks like non-union workers , I wounder if they are paid by the peice , that is so cool , I'd like one
Thanks for watching
I love this kind of manufacturing processes!
thanks
//;*;;*;*;*;;//.😊😊.
bloody good to see you got moden gear and concreit floors!!
Oh yeah!
Bravissimo complimenti perché non li portate anche in Italia 😊
Thanks for watching 👍
Why not drive only one wheel and double tyre width. lose differential and reduce weight or maybe emply an electric differential ? Nice work though .👍
Great point!
I want one for my small farm.
Come to Pakistan and get it
@@atomthings7923! They are extremely nice though. I wonder if they're street legal in the U.S.
What h.p. does the engine put out ?. Looks a very simple and useful little truck designed to work in its own environment. Not the expensive production lines seen in the West etc but correct for the country it is built in, everyone busy and knows their job.
//;*;;;*;*;;*;;//.😊😊.¡!¡.//.;;//.
So , when DO THEY finish all the welds on the frame ? The videographer has only recorded 'SPOT' welds to hold all the formed metal pieces of the frame together !
🤔🤔
Tacked together on the jig, welding is completed on the floor out of the jig allowing access to parts that require welding. Some dimwit makes as similar comment on all these type videos. You need a several hour long video to show the process in its entirety you twerp.
It was shone just afear the initial spot weld.
Tighten the wheel bearings so the wheel hardly spins. 😂
That looks like a well made machine that will give lots of service. I would say that on the tailgate, I would change the two panels that cover the tail lights when open to a wire mesh. This way they can be seen if you are carrying a load with the tailgate open. A small thing. Otherwise, I would buy one.
Exactly it’s very useful for transporting goods around the city
وفقكم الله لما يحب ويرضى وجعلكم شوكه في عيون الاعداء واعلم يا اخي بان( الكلاب تنبح والقافله تسير)
Thanks for watching
What is UNBELIEVABLE about this manufacturing process. It is common all around the planet. Change to title to very common manufacturing .
👍😎
This reminds me of a place I worked in when I was a boy. Catch your breath for two seconds and some bastard wanted to know if you had nothing to do. Nice product though.
🥺
More proof that there are skilled workers all over the world, not just in the West. Maybe even more skilled due to limited automation, i.e. welding robots, automated assembly machines, high tech measuring and volumetrics gauges and measuring tools, automated assembly line conveyors, ergonomic tools & chairs, etc.
Exactly 👍
Thank you to LAL DIN for allowing the camera man into the plant. Much enjoyed the video.
🙏🙏
No guards on moving machinery and no safety shoes...Engineering on the cheap
wow , now i know to look for the tag made in canada
😭😭
very well built machine, considering the road conditions there
Wondered how much one of them cost, in American dollars that is?
It’s around 2500$ right now but in America when you import this it will cost you higher
Стоит он не дорого ,а вот доставка и растоможка...😢😊
That is awesome, I want one. Not sure it'd be legal in the UK though...
🤨🤨
Love one in the uk
Thanks 🙏
Хороший " Муравей"...
hmmm
Ojalá el gobierno de Colombia aprenda de esta industria y no se gaste la plata del pueblo en prebendas políticas
Thanks for watching hope you enjoyed
Too bad we can't get one in America it looks like fun to go on trips !
😎
عمل جيد بكوني صانع في مجال المقاييص الذي تتركب عن بعضها Bien fait, car je suis un fabricant dans le domaine de la découpe et de l'assemblage de pièces pour fabriquer quelque chose du genre
Awesome product, Unique, Hey you know how to catch a unique Rabbit 🐇🐰
Unique up on it. AIN'T IT JUST AIN'T IT 😜 lols.... Keep up the good work.
You got that right!
Fascinating video.
Un trabajo muy laborioso con humildad ganándose el sustento todavía no se an robotizado y hojala no lo hagan
🥺🥺
dam man this is another level of manufacturing compared with the others is like Africa say they have better quality that china less costly that japan
Thanks for watching and your suggestions 😎
It's amazing how such small horsepower engines can carry such huge loads. 😊
True that!
@@atomthings7923 wht horse power is it ? 20 or 30 PS ???
Taller casero puro ingenio a falta de máquinas robotizadas la necesidad hace trabajar el ingenio
western gearheads: nice machine but can i fit a hayabusa engine in it?
Sure you can but first you have to buy this one
Wish we had them in the states.
🤓
GuD Work with Less Possibilities ...
Is one fan enough for cooling the Engine, Especially during summers in Pakistan, when the outdoor Temperature crosses 50*c .. ?
top de linha meu sonho e te uma dessa
nice
Thanks
One day someone will want to drain that gearbox, good luck with the drain plug, it went in cross threaded with a rattle gun.
😎
Отличная машина. Сколько стоит и где можно купить?
It will cost you around 2500$ it’s only available in Pakistan
Интересно, этой рамы хотя бы на пару дней хватает?!🤣🤣🤣
It lasts years bro 😎
What a cool vehicle to have here in the UIS!
Come to 🇵🇰 and take it with you 🤓
When do they start shipping to Australia?
Awesome machine, and an awesome team building them!
(some of the welds on the sub frame need attention though) 👍
Good question! No idea
I’d love to have one of those on my land . Could be fun
Yeah it is fun
Great work.
Thank you! Cheers!
This is very heavy bike loader.
Yup it is
Where can I find one of these fabulous automotive wonders in the city of Iloilo, Philippines?
Кто-то купит драндулет с помятым передним диском😅.
hmmm
hmm not so sure about those engine mounts I think those bolts need to be shouldered bolts so the engine actually sits on the springs instead of be pulled up hard
👀
What!? No sandals?? I'm calling shenanigans on this!!
Ooops! there they are @21:10
🫡
Bella progettazione.prezzo di mercato??
Thanks for watching…. It’s around 2500$