I bought 1 a year ago. I love the thing. I took the bar off to clean it and spent an hour trying to get it back on. That was frustrating, but I got it. I'm 54 now so this will be my last chainsaw unless I discover the fountain of youth.
I went down the poulan bar rabbit hole with my 4620 poulan pro. After comparing mounts, I purchased a K095 mount bar and it works fine. I think the recommended mount was a K041 which was much harder to find and more expensive. My exact bar is an oregon speedcut 200TXLBK095. If you get a chance try out the oregon narrow kerf speed cut system on one of your small saws. They claim 15% increased efficiency and I believe them. I also use the versacut bar on my larger saw. Significantly lighter than any of my other bars.
That's a sharp looking saw. I was actually just thinking the other day about how much you would have to move the camera for different angles and all the editing that would be envoled and I'm sure many other things. Great job👍
You just might be changing my mind about these Echo saws. I always thought they were ok but after your previous echo videos and now this one Echo just might be the next saw I purchase. This 4510 is a sweet looking saw. Echo is definitely doing it right in the looks department. For whatever that is worth. Great video again! Killin' it!
Just got wind of your site...love it! Own 3 Echo's and love em! Also own 3 Husky's and one Dolmar and bottom line...I LOVE CHAINSAWS!!! Going to spend the evening checkin out more of your videos!
Great review. Thanks for sharing. I'm considering purchasing a fresh second-hand Echo 4510 in the next week or two. I'll probably go ahead and just buy it following this video. Thanks.
That’s one thing I like about these high school girls, I keep getting older and they stay the same age. That wouldn’t fly in a movie today. I was barely eating solid food when they came out haha!!!
Ya know, that movie is the first time he ever said, "Alright alright alright!" He was told to just drive up and hit on the redhead girl, and he said it just came out. Been saying it ever since.
@@Brian-Outdoors do you know how long warranty we get? I know there are som problems with this model too. Leaking crankseals, bad bearings and a lip that will chew your ignition module wire.. Paid only 600$. Put my 550 XP 2015 version through helluva lot of abuse, sold it for 550$ :-)
@@lassila3 I thought it was 5 years if you bought it with their gas to extend the warranty but that is only for consumers not for anyone that uses them professionally to make money. Only 1 year I believe for that. Also you have to buy a certain amount of there premixed gas to get that coverage.
So I'm intrigued... what is the logic behind this saw from Echo's marketing? Pricing it's just barely behind the 4910... air filtration and overall looks are way better, but potentially less beefy build type. I'm curious how the performance aspect of it grows or is it just an outcast... damn it now I want this to be the 45cc hot rod because it's wayyyyyyy cool looking.
It looks and feels really cool but it runs like crap. Unless you're going to do the carb and port and muffler, I honestly can't recommend it, even though it is very cheap and technically good value on paper (which is why I bought it).
As far as the chip size goes on the .325 chain, it’s amazing what a good hand filing job does. I would get 3/8x1/2” chips from mine before I converted my CS550P over to 3/8 chain. Look into (if it’s even possible with mass produced parts) having it converted into a rim style setup. You’ll be much happier in the long run.
It is strato. Upper part of the channel gets clean air, lower - fueled. Once you go WOT the butterflies in carburettor work as separators. The wall between them allowing that is ECHO patented.
Hi I love all my ECHO saws! The name / numbers are different at some saws here in Germany. I don‘t know why. We are using only ECHO saws. I‘m a tree climbing feller. In use : CS-2511TES, DCS-2500, CS-362TES & WES, CS-501SXH and the lovely CS-7310SX. I like your work and your content. I hope you continue to show a lot of your work. The results are good, no question. But the details make the difference. 💪👍 Greetings, Dirk
I have experience with the cs 4510 it's bone stock has been since December 2019. How can I get it to run better. The first chain that come on it was really the best chain . But the saw is a pig w lipstick. It doesn't even kick back w u give it gas .. maybe a little more horsepower at the end of the tank . Don't even know if running a saw all the way out of gas is good for two stroke chainsaw strato. The echo bars are pretty crappy u right about that they used to be better.Helpful comments please.
did you ever find a way to make yours go better? I'm really fed up with the lacklustre power output and constant bogging down with mine. He demo'd removing the carb restrictors in a later video (aug 2022) but I'm skeptical that this is a good idea long term as they seem to have a role in preventing the jet adjustment screws from moving on their own over time.
I might have gone with the Hooskiverna 543xp. Albeit a little bit more expensive. But it is a magnesium case saw and has just shy of 3hp rating. I personally am biased against plastic clamshell cases. As they do not lend themselves to long hard running. And were designed to be replaced mostly, instead of repaired. The Stihl ms241(if you able to find one) is a screamer as well when ported. Along with a Dolmar 4300 is a super stout lil 40cc saw, that's built to impress.
I guess i dont understand this saws place in the line up. It weighs more than a 4910, costs approximately the same and has less power. Am I missing something?
@@novicelumberjack The 4310 came out about 6 months after I bought my 4510. After much research and buyer's regret, I still haven't gotten over it. Do you think removing the restrictors is a viable thing long term? Some commentators have speculated that they serve the purpose of keeping the jet screws from moving on their own through vibrations, is that a logical worry?
BEAUTIFUL SAW, CONGRATS! Echo using the black accents really sets it off. Doesn’t look as ‘cheap’ as the all orange monotone appearance. About my only gripe with a lot of the Echos is the cheap looking and feeling plastic parts. PA6 GF, and they don’t even say if it is GF30? Seriously, my 15 year old Husky body parts look as good, maybe even better than my new CS-590! I know, its a chain saw, and its a minor thing, but the details matter, sometimes?! Yeah, K095 small Mount also for Dolmar/Makita. To each their own on safety, and it is your channel, and your choices, AND Your Business; I would just ask you to play it safe, and consider other safety features. I like you and I am a Subscriber, just meant in a good way. I would offer up one of your bucking cuts, @ 19:51! Nothing wrong with what you did, but it would not have taken much for that saw to somehow slip, or whatever, and be into your leg! Juss sayin... Enjoy your channel, and look forward to more! Best to you and yours! 👍✌😀
I bought 1 a year ago. I love the thing. I took the bar off to clean it and spent an hour trying to get it back on. That was frustrating, but I got it. I'm 54 now so this will be my last chainsaw unless I discover the fountain of youth.
I went down the poulan bar rabbit hole with my 4620 poulan pro. After comparing mounts, I purchased a K095 mount bar and it works fine. I think the recommended mount was a K041 which was much harder to find and more expensive. My exact bar is an oregon speedcut 200TXLBK095. If you get a chance try out the oregon narrow kerf speed cut system on one of your small saws. They claim 15% increased efficiency and I believe them. I also use the versacut bar on my larger saw. Significantly lighter than any of my other bars.
That's a sharp looking saw. I was actually just thinking the other day about how much you would have to move the camera for different angles and all the editing that would be envoled and I'm sure many other things. Great job👍
You just might be changing my mind about these Echo saws. I always thought they were ok but after your previous echo videos and now this one Echo just might be the next saw I purchase. This 4510 is a sweet looking saw. Echo is definitely doing it right in the looks department. For whatever that is worth. Great video again! Killin' it!
Just got wind of your site...love it! Own 3 Echo's and love em! Also own 3 Husky's and one Dolmar and bottom line...I LOVE CHAINSAWS!!! Going to spend the evening checkin out more of your videos!
The ThunderKitten video is my favorite. Hope you like it!
Great review. Thanks for sharing.
I'm considering purchasing a fresh second-hand Echo 4510 in the next week or two. I'll probably go ahead and just buy it following this video. Thanks.
That’s one thing I like about these high school girls, I keep getting older and they stay the same age. That wouldn’t fly in a movie today. I was barely eating solid food when they came out haha!!!
Ya know, that movie is the first time he ever said, "Alright alright alright!" He was told to just drive up and hit on the redhead girl, and he said it just came out. Been saying it ever since.
@NoviceLumberjack it's a strato charged cylinder. Best upgrade for a 4510 is a 4920 shorblock lol.
Just bought a new cs-3410 and I believe it has almost identical specs except for $80 less
Very nice saw bud!!!!!!Glad your hard work and dedication is paying off. Great videos and informative. Keep it up!!!!!👍💪
Just think of the gains you get when you break it in, base gasket delete, cut the squish , port,
I love small saws that kick butt!! Run a narrow kerf light weight bar!!
If the exhaust on the 7310 was too long, just buy or fab west coast style felling dogs to pull you away from the pipe some.
Hit your rakers on that new chain, for the 7310. Hold on you're in for a ride.
Now that is a cool looking one. Ordered a new 550 XP-G this week. Might get one of these too after a while.. :-)
You’re going to love that saw as they rip. My 550XP Mark II is awesome!
@@Brian-Outdoors do you know how long warranty we get? I know there are som problems with this model too. Leaking crankseals, bad bearings and a lip that will chew your ignition module wire.. Paid only 600$. Put my 550 XP 2015 version through helluva lot of abuse, sold it for 550$ :-)
@@lassila3 I thought it was 5 years if you bought it with their gas to extend the warranty but that is only for consumers not for anyone that uses them professionally to make money. Only 1 year I believe for that. Also you have to buy a certain amount of there premixed gas to get that coverage.
So I'm intrigued... what is the logic behind this saw from Echo's marketing? Pricing it's just barely behind the 4910... air filtration and overall looks are way better, but potentially less beefy build type. I'm curious how the performance aspect of it grows or is it just an outcast... damn it now I want this to be the 45cc hot rod because it's wayyyyyyy cool looking.
It looks and feels really cool but it runs like crap. Unless you're going to do the carb and port and muffler, I honestly can't recommend it, even though it is very cheap and technically good value on paper (which is why I bought it).
4910 501 bar mount is the 216 but the 095 adapts very easily
It needs to be Briscoized!!!!!!
009 is Husquvarna large mount.
I'm a new subscriber and I very much agree that the part time chainsaw user seldom needs a saw above the 50 cc class
New today 12,2,23 from Lewis equip. GrassPants Origun, 4510. Need info on "warn-up". Cheers! New sub,too!
Add a video if u could to show some of us amateurs how to mod the muffler and it adjust carb. Still think in my opinion to keep it stock
K095 is the small Husqvarna mount, D009 is the big Husqvarna mount.
As far as the chip size goes on the .325 chain, it’s amazing what a good hand filing job does. I would get 3/8x1/2” chips from mine before I converted my CS550P over to 3/8 chain. Look into (if it’s even possible with mass produced parts) having it converted into a rim style setup. You’ll be much happier in the long run.
Verry nice 4510
Why cut it w the log hog stock 4510 lol. It has been an ok saw just expected a lot more. A
I am living in my mom´s basement watching a middle-aged man speaking about chainsaws, how did it all go wrong
That's too funny man!
@@novicelumberjack To be fair though it’s only temporary after selling apartment and buying a new one lol
U don't like to run saw do u
It is strato. Upper part of the channel gets clean air, lower - fueled. Once you go WOT the butterflies in carburettor work as separators. The wall between them allowing that is ECHO patented.
Hi
I love all my ECHO saws! The name / numbers are different at some saws here in Germany. I don‘t know why.
We are using only ECHO saws. I‘m a tree climbing feller. In use : CS-2511TES, DCS-2500, CS-362TES & WES, CS-501SXH and the lovely CS-7310SX.
I like your work and your content.
I hope you continue to show a lot of your work. The results are good, no question. But the details make the difference. 💪👍
Greetings, Dirk
Enjoying the show!
Just bought a 4920 . Thoughts? For me besides being a clamshell I like it.
It's a nice Lil saw!👍s🆙BigGuy!
I'm not sure just the first movie that popped in my mind. Sounds like something off that movie or mall rats.
Dazed and Confused. A classic!
I reckon this thing just got out on the shelf and forgot about. Wonder why there’s no info out there on them…😅
I have experience with the cs 4510 it's bone stock has been since December 2019. How can I get it to run better. The first chain that come on it was really the best chain . But the saw is a pig w lipstick. It doesn't even kick back w u give it gas .. maybe a little more horsepower at the end of the tank . Don't even know if running a saw all the way out of gas is good for two stroke chainsaw strato. The echo bars are pretty crappy u right about that they used to be better.Helpful comments please.
did you ever find a way to make yours go better? I'm really fed up with the lacklustre power output and constant bogging down with mine. He demo'd removing the carb restrictors in a later video (aug 2022) but I'm skeptical that this is a good idea long term as they seem to have a role in preventing the jet adjustment screws from moving on their own over time.
Dude gets his first CZcams check and runs straight out to buy a new saw to show us.. you’re alright. I agree she’s a looker.
Haha I watched you 4910 video. I was gunna say what about the 4510....you already went over it
The 4910 is .7 Lbs lighter? I don't see the point of this saw judging by the specs.
There isn't much of one. It's a consumer saw. Thought I was buying the 4310.
Also Aluminum core.
I might have gone with the Hooskiverna 543xp. Albeit a little bit more expensive. But it is a magnesium case saw and has just shy of 3hp rating. I personally am biased against plastic clamshell cases. As they do not lend themselves to long hard running. And were designed to be replaced mostly, instead of repaired. The Stihl ms241(if you able to find one) is a screamer as well when ported. Along with a Dolmar 4300 is a super stout lil 40cc saw, that's built to impress.
The Echo 4310 will be out soon as the echo pro mag case saw in the same class as the 543xp, ms241 and dolmar 420
Dazed and Confused
I keep getting older, they stay the same age!
I guess i dont understand this saws place in the line up. It weighs more than a 4910, costs approximately the same and has less power. Am I missing something?
Yes. You are missing my mistake. I mistook it for the 4310 and made an impulse purchase. I gave it away to someone in need.
@Novice Lumberjack sorry to hear about your mistake. I guess the question should be directed at Echo. Stay safe amigo.
@@novicelumberjack The 4310 came out about 6 months after I bought my 4510. After much research and buyer's regret, I still haven't gotten over it. Do you think removing the restrictors is a viable thing long term? Some commentators have speculated that they serve the purpose of keeping the jet screws from moving on their own through vibrations, is that a logical worry?
BEAUTIFUL SAW, CONGRATS! Echo using the black accents really sets it off. Doesn’t look as ‘cheap’ as the all orange monotone appearance. About my only gripe with a lot of the Echos is the cheap looking and feeling plastic parts. PA6 GF, and they don’t even say if it is GF30? Seriously, my 15 year old Husky body parts look as good, maybe even better than my new CS-590! I know, its a chain saw, and its a minor thing, but the details matter, sometimes?!
Yeah, K095 small Mount also for Dolmar/Makita.
To each their own on safety, and it is your channel, and your choices, AND Your Business; I would just ask you to play it safe, and consider other safety features. I like you and I am a Subscriber, just meant in a good way. I would offer up one of your bucking cuts, @ 19:51! Nothing wrong with what you did, but it would not have taken much for that saw to somehow slip, or whatever, and be into your leg! Juss sayin...
Enjoy your channel, and look forward to more! Best to you and yours! 👍✌😀
Oregon Speed Cut Narrow Kerf. !!!!!!!!!! 20”
You'll need the echo 91157 limiter removal tool. It's about $20.
Thanks for that! I'll get one ordered.
A drywall screw works..bit cheaper too
How do you rate this compared to the 4310 ???
Poorly. Power wise, they are very similar. But weight and build quality....no. the 4310 is two pounds lighter and professional grade. It is awesome.
St zacharie Quebec Canada
Wayne's world?
"Nice" (??) studio... why aren't you RUNNING the saw through WOOD?
Dazed and confused
Yayyyyyyyy! You got it my man!
Good movie lol
Talk some dude please talk some more...
K095 BABY. CHA CHING. !!! Your can get aftermarket!!!