Flame Beacon - Restoration of a Beautiful Rare Rusty Lighter
Vložit
- čas přidán 27. 10. 2022
- Hello everybody!🖐 The Restorer is with you again.🔥😎
My creative ASMR video of the restoration of an extremely beautiful and unique gasoline lighter, which is made in the form of "Flame Beacon". This lighter is perfect for creative Halloween looks. The lighter that I restore in the video is very old, it is rusty and covered with corrosion. The lighter is probably more than 100 years old. During the restoration of this antique lighter, it turned out that it is made of brass. My goal was to restore this antique item to perfect condition. In the video, I try to demonstrate in detail all the stages of the restoration (how do you like this style of video creation?) I don't know who made this rare lighter, maybe it was done by a jeweler or a metal craftsman. If you know any information about this lighter - "Flame Beacon", write in the comments. I will be interested in learning more about such ancient artifacts. I hope you liked the result!
✅Become a sponsor💎 of this channel and support our work👇
/ @therestorer
Also, do not forget to rate my work in the comments from 1 to 10.😉
I am very interested and important to know your opinion.🙂
Thanks everyone for watching! See you!)
It will be even more interesting later...
If you have any questions, ask them in the comments.
I will try to answer everything!)
#restoration #TheRestorer #asmr #lighter - Zábava
Rate my work in the comments from 1 to 10.😉
I am very interested and important to know your opinion.🙂
Become a sponsor💎 of this channel and support our work👇
czcams.com/channels/4fsm3kk1LBvVfyUY4aivcA.htmljoin
Thanks everyone for watching! See you!)
fake and stupid as fuck
3
9
You could have gotten a 7, but as you artificially rusted the lighter before hand I'll need to give a 2 for cleaning brass.
if you want a link to them lmk. they are less than $20 a set and actually last quite some time especially for this type of work and jewlery
You are always a ten from the beginning to the end with the work you do, which is amazing and fascinating to me.😊 Thankyou for your share.
Thanks!👍 Where are you watching from?🌍😉
California
For those of you who aren't sure what your seeing , this is a classic case of artificially "rusted" item being "restored". How do I know this ? Well , for a start , brass doesn't rust. Despite all the corrosion , the threads were nice and clean and there was almost no pitting anywhere.
So , in conclusion , a fairly poor fake.
Found among old rusty things
Not a metallurgist but it's been my experience that brass, bronze tarnishes but does not rust.
It can be covered with corrosion from other metals, brass oxidizes and changes color
@@TheRestorer ha ha funny man. The brass can corrode after YOU soak it in acid , pull in out in the air to form green copper carbonate, copper chloride or copper sulfate depending on the acid used. Once the desired color is obtained you put it in a jar with fine steel wool and bleach or vinegar to form brown rust on the object. You should make a video of you faking it. Carnival act.
@@TheRestorer Yes Green, not red.
@@TheRestorerif you make a slurry out of iron filings, water and vinegar you can cake it on and create a layer of iron rust on brass parts.
Iron oxide in water doesn't just adhere to brass objects nearby.
This video is virtually the same as people who "restore" die cast cars that are coated in iron oxide as well, despite the bodies being made of zinc alloys
Некоторые восстановленные вещи выглядят пожалуй даже лучше, чем когда они были совсем новыми
👍😉
It's a french lighter (MARQUE DEPOSEE underneath which means "registered trademark") and specifically one made to look like a miner's lamp. Nice job man.
Cool! Thanks for the information and good review!👍😉
No, it IS a miners lamp.
@@senorboardhead no, a lighter. If it was a miners lamp it would be bigger and the part where the pins are inserted around would be glas. Although, some models look and work pretty much like a lighter, including the flint and wheel. The wheel would just be turned from the bottom. And in most cases you would have an additional screw to set the wick length.
Very cool, thank you for the knowledge!
A você também, belo esclarecimento! Quem sabe, sabe! ❤
Put silicone sealant on the jaws of your pliers & vise so you won't damage what you are gripping. The silicone can be peeled off & reapplied as needed. Use clear silicone so you can see what you are gripping better. Silicone gives you a soft, non-marring grip. It protects the object much better than tape. Jewelers use silicone on their tools for delicate items.
Cool tip!
Thanks
Would electricians tape do the job as well?
No, electrician's tape will not work as well.
Vice!
I watched your video in 2x speed and it looked much better.
It's good
I truly love this lighter! Absolutely stunning! Another 10!
Campers would love to have this lamp! A Fine Beacon in the Night!
Yes, a cool unique thing)
My favorite one so far! I have watched many.
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorer Wichita Kansas
10. Your work reminds me of my father's, he was a perfectionist at what ever he did.
Love the uniqueness of this lighter!
Thank you!)💚😉
10 out of 10 for the restoration. This lighter looks like it was modeled after the British Garforth mining safety lantern. The holes on top make it look like that's what they modeled it after.
Thank you!)💚😉
9/10 it’s beautiful now I respect your ability to work without big expensive tools. Using the rotary tool to polish was excellent. 💕❤️💕
Thank you!)💚😉
Amazing everything I seen you restore. Ten always.
10 out 0f 10 from start to finish . From a rusted lighter to a fresh out of box looking lighter . Looks outstanding .
Thank you very much!)💚😉👍
Podziwiam "Odnowiciela" i podziwiam stare przedmioty. "Odnowiciel" przywraca im drugie życie a starocie potrafią odzyskać piękno młodości. Fascynujący proces. Dziękuję, pozdrawiam.😀
Thanks!👍 Where are you watching from?🌍😉
Просто замечательный результат. Вы - мастер и у Вас золотые руки! Привет из Сибири, Россия.
Это видео, как и все на канале - фейк
Holy cow, what a huge amount of work!....so beautiful!
Thank you very much!
Glad you liked it!)
What a beautiful piece you restored. Your knowledge of solvents, compounds and abrasives you use always fascinates me.
Thanks👍😉💚
I think its beautiful.
Thank you!👍😉
очень нравится ваша работа. золотые руки
Great job!
Thanks!👍 Where are you watching from?🌍😉
Ditangan orang lain hal demikian sudah dianggap tidak berguna.
Justru sebaliknya, kemahiran anda menjadikannya semakin bernilai mahal.
Bagus sekali, semoga sukses canelnya.👍
Salam dari Surabaya Indonesia.
Thank you💚😉👍
Gorgeous
Hello! Thank you!👍😉
Where are you watching from?🌍😉
@@TheRestorer I’m watching from New jersey
I give you a 10......!!!
👍😉💚
I never get tired of watching you work. It is very relaxing. I admire your craft and how you are able to bring back to life those beautiful articles. What you do is an art. You don't need points, because you are the best at what you do !
Excellent! solid 10
You’re work is amazing! 11/10!
Thanks!👍😉
Przepiękne jest to odrestłrowane ta cała zapalniczka do fajek pozdrawiam twórcę tego filmiku 👍👍👍👍
Thank you very much!💚😉
thats a unique design lighter..so empressive yor work...nice restoration.
Thank you very much!💚😉
Ceci est la réplique d'une lampe de mineur...Mon défunt père était mineur de charbon dans les haut-de- France...Chouette restauration,ceci étant dit.👍
Merci pour l'info! Ces briquets ont-ils été donnés aux mineurs ?
@@TheRestorer Non,ce sont des petit objet que l'on trouvait (ou que l'on trouve peut-être toujours)dans les bazars ou encore dans les vitrines des bureaux de tabac.Pour les passionnés de notre histoire des mines,ce genre de babiole sont du pain béni.A travers cette vidéo,tu rends un bel hommage à nos anciens qui ont donnés leur vie pour ce merveilleux héritage qui fait tant renommée de notre belle région,aujourd'hui.Merci beaucoup...
"Viiiiiveu le ch'ti mi !..."👍😉
شكرا جزيلا عمل اكثر من رائع انت تبذل جهدا كبيرا ومميزا
Love the lighter! You did a 10/10 job.
Thank you!)👍💚😉
Looks like you ‘antiqued’ it quite a bit before you restored it 😂
Someone on my level! ✊😁
Brass is known for rust, isn't it?
This brass lighter was lying next to some rusty old things
This brass lighter was lying next to some rusty old things
Highly cool project and Very nice work.
I agree with your opinion. It is also interesting to know your opinion about my videos. In one of the videos, I made a sapphire ring out of a titanium tube.
Thank you!)💚😉
Very good video, great close-ups, nice editing 9/10,... plus beautifull restoration 9/10
Thank you!)👍💚😉
ΚΑΛΗΣΠΕΡΑ ΑΠΟ ΑΘΗΝΑ.ΕΙΣΑΙ ΕΞΑΙΡΕΤΙΚΟΣ.ΠΟΛΥ ΚΑΛΗ ΔΟΥΛΕΙΑ.10000...
Τους χαιρετισμούς μου σε όλη την Αθήνα και την Ελλάδα!)
Piękna zapalniczka i świetna renowacja👍 film 10/10. Pozdrawiam
Thank you !👍😉💚
Bardzo dziękuję za docenienie mojej pracy!)
Wow, impressive. Great job. Thanks for sharing.
😉👍
9.5 out of 10
Thank you very much👍😉
I'd say you clean that up very nicely. Nice project and it should stay looking good for some years to come now... Thumbs Up!
Thank you very much!)😊👍💚
Какой вы замечательный мастер!!!
Thank you!👍😉
Синяя ржавчина не может появится на металлическом изделии, этот канал целиком фейковый
The end result is STUNNING. Loved watching the entire process. Thank you 🙏🏽 for sharing the entire process of each restoration. Sending blessing and encouragement. 🙇🏻♀️👌🏽👏🏽
Your work is always a 10.
Thanks!👍😉
How do you get the old rusty look that is on every piece you do? it's remarkably consistent, I think it's more impressive than the clean up.
Old finds look like this
@@TheRestorer No they don't . I've looked at many of your videos to check for this. Almost all of your items have identical "rusting and corrosion". Not a coincidence.
Some of us know what we're seeing , and we see through you.
@@TheRestorer 🤣🤣🤣
@@TheRestorer You are a fake. Brass does not get red rust on it. The green is patina. I think you put it on with a vinegar paste and leave it a while. Now, it looks like a $1 souvenir from a shop in seaside towns.
Fraud 😡 ~ even photo-shopped the thumbnail to “click-bate” the hoodwinked to watch the video
Another beautiful restoration.
Thank you very much!)😊👍💚
10/10 great job such a unique piece.
Thank you very much!💚😉
10! Awesome lighter.
Thank you!😉👍
10 for 10👍👍👍👏👏
Wow, you got it to shine again! Great job on this one😃👍
Thank you very much!💚😉
Amazing restoration! 10!
Filling of lighter reminds me why I hate bathroom cleaning 😅
Thank you!)
Great Job Sir !! Thank You very much for Sharing this Wonderful Passion of Restoring beautiful item's. I'm going to say some where between the mid 40's to about early to mid 50's.
Thank you!😉👍
Thanks for the historical information on this lighter
Muy bonito el encendedor y muy buen trabajo. Felicidades.
Thank you👍😉
Excellent restoration! 10 👍🏼
Thank you very much!)👍💚
20 Rating in my book! Awesome work. Loved it!
Thank you😉💚👍
Brilliant well done
😉👍💚
Very entertaining and professional.congrats.its 10 for me
Thank you!)
Tão relaxante!
WOW!!!
😉👍
Класс 👏👏👏👏👏
👍😉
@@TheRestorer Украина?
Beutiful workmanship, 09 from my side.
Thank you very much!)😊👍💚
I use to soak brass or coper in vinager, salt and some flour, then is very easy to polish
Cool! Thanks for the advice. I will try
Everything you do has my full and undecided attention. Always an 11 from me!
Yes definitely another 10 from me on this one as well very nice work !! Look at it shine and it works !! Amazing work !! 👍👍
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorer I am from the United States
Beautiful Restoration
Thank you very much!💚😉
Impressive restoration, just beautiful. I also love the ASMR quality of your video…nice to watch and listen and fall asleep to. Very relaxing! 😴
Thank you! I'm glad you liked it!)
Wow, just WOW! Definitely a 10!!!
Thank you very much!)💚
Amigo, virou uma jóia preciosa! ❤
Thank you!👍😉
10/10
😉👍
I wish you would comment on what you use to clean the parts, etc. great restore!
Thank you!)💚😉
It’s so beautiful!
Excellent work!
Thank you!)👍💚😉
Wow amazing keren 😁👍👍👍👍👍👍👍👍👍👍👍👍👍🇲🇨🇲🇨
Thank you!)
I am confused, the end result is a shinny unpitted brass item, that somehow you started with a mass amount of red Iron ozide on it, that if developeed on the part would have one had to contain some amount of Iron and two left deep pits from it.. how is that possible?
definitely a 10.
Thank you very much!💚
Beautiful job! It's a 10 from me!
Thank you very much!💚😉
TRES JOLIE BEAU TRAVAIL🦾
Love it...10
very nice restore ...👍👍👍👍👍
Thank you very much!)💚
Great job.
Thank you very much!💚😉
I give you a top10 ! That was fantastic!
Thank you!👍😉
Awesome job
Thank you very much!)😉👍
Nice restoration❤🎉
Thank you very much!)👍😉💚
Very cool, well done.😊
Thank you very much!💚😉
Great job ❤
Thanks
@@TheRestorer sei una grande persona. Il tuo sapere non ha valore. Sei eccezionale.
Definitely a 10! Excellent restoration!
Thank you!😉👍
I will give a 10 love your work
Thank you!)
Người việt nam đầu tiên
is she vietnamese?
Super👍👍👍🔥🔥🔥
Thanks💚
Very good Work.
Thank you very much!😉💚
Well done
Thank you!)
sicuramente 10 .con lode .
molto interessante 😀
Thanks!)
Bravo!
Thank you!)💚😉
How can Copper or brass rust?
It was covered with rust, because the lighter was lying among rusty metal things
Гарна праця!
💚😉
I enjoyed your work 10+
Thank you!)
Good👍👍👍🌹🌹🌹🌹👍👍🌹🙂🌹 job ✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻
Thank you!))))😉👍💚💚💚💚💚💚💚✨
Iconic
Rare