Extremely Rusty Electric Stove - Restoration
Vložit
- čas přidán 24. 11. 2023
- Extremely Rusty Electric Stove Restoration.
In this video I restore a very old electric stove. I found this stove some time ago. I thought this stove should be restored so I started restoring this stove.
To restore the stove, I started by removing the hard mud on the stove. After removing all the dirt from the stove I used a wire brush to remove loose rust from the stove. I then began to disassemble the stove. After disassembling the stove I started the electrolysis process on the stove to remove all the rust. All the rust has been removed from the stove. And after that I started painting the top of the stove. On the top of the stove I did the filling with steel putty, and painted it matte black.
Now I started working on the bottom of the stove. The lower part of the stove has weakened due to heavy rusting. This part is heavily corroded and the iron is pitted, I applied Magic Depoxi filling to fill the holes.
And then white painted the bottom of the stove.
After that I started the restoration of the stove grill.Previously the rust was removed from the grill by an electrolysis process.Then cleaned the grill with a wire brush on the angel grinder.
After restoring all the parts of the stove, the stove was assembled.
I had a lot of enjoy restoring the stove and I'm glad the stove turned out with a good result.
Work I do in the video and what I use . If you want to ask any question, please ask in the comment section. I read everyone's comments and try to answer.
Subscribe for more of my content. I'm uploading videos about Restoration.
Thanks For Watching:-)
#restoration
#restorationvideos
#stove
rescue
#asmr
#restore
#antique
#repair
#ayazrestoration - Zábava
Думаю перед реставрацией их специально закапывают в землю, для придания действию более драматического вида. Это конечно не отменяет проделанной работы... Хотя решётку можно было и выровнять.
Я нашел эту печь в подземелье. Решетка спроектирована таким образом, что ее не нужно выравнивать.
I love when you restore something and it works!!!
Thank you so much ☺️
It does not matter if he goes throught the same process😅all the time, but I love to see the end result and working perfectly
Nice
For the amount of trouble, just get a new one at Ace hardware!
Most of these channels choose something in normal condition that they know they can fix, bury it for a week or two, and then dig it up and call it a restoration.
Dava pra caprichar mais nessa restauração.
I I felt you could have invested more
This was fun to watch.
Thank you so much.😊
Bad reconstruction😢
😞
Amo esse vídeo muito legal
Obrigado pelo seu feedback positivo sobre o vídeo. Fico feliz em saber que você gostou.
Nice. But many items covered in mud, seems convenient 🤔🤔 there's a lot where they are covered in mud on purpose...
Эта плитка не стоит тех денег,которые ты на неё затратил.Решётку надо было выпрямить эта решётка предназначена для сушки тостов.
Anytime I see this kind of item I move on😂
☺️
This isnt a cleaning. This is archaeology!
He had to excavate the dang thing 😲
SUPERB.....👍👏👏👏👏🌹
Thank you so much. 😊
Presionas mucho la espátula o rasqueta cuando aplicas la masilla. ¿Los guantes también fueron restaurados?
Tienes razón, puse demasiada presión en el raspador mientras hacía la masilla. Intentaré no hacer esto la próxima vez. No, los guantes no se pudieron restaurar.
Manda mais vídeo
Was it buried under ground or something?:D Damn.With all that dirt I wasn't even sure what I'm looking at. It's incredible that you managed to put it into not only recognisable, but also working condition. Truly amazing you are.
Yes, I found it underground, but not buried very deep. I am glad you like my work. Thank you so much.☺️
Restaurado fogão elétrico 🔥😉
I'm here to clean it, whether it's fake or not 😅
Przepięknie jest ta bardzo stara maszyneczka odrestaurowana pozdrawiam serdecznie 👍👍👍👍👍👍
Bardzo dziękuję.☺️
Looks like new again 😁
You said right.☺️
Extremely rusty? Haha, it was sand, nothing more.
Gostei da restauração,reuso será ofuturo. 🇧🇷
Que bom que você gostou do vídeo.☺️ Você está certo, este fogão agora pode ser usado novamente
Da restaurare ancora..lavoro approssimativo
Mal feito. 🇧🇷👎🏻
For Pakistan is ok but for the US or Europe this is weak, so weak...
😅
Gostei.
Que bom que você gostou do meu trabalho. Muito obrigado por assistir o vídeo☺️
Bravissimo complimenti bel lavoro 👍😘
Sono felice che ti piaccia il mio lavoro.😀 Grazie mille.
👏👏👏👏👏👏💯💯💯👍👌🇧🇷🇧🇷
Thank you so much.☺️
Best video I’ve ever seen also how in the fuck you find a stove that dirty that’s like you went to a junk yard and found it like that
👏👍👏👍👏👍👏👍👏👍👏👏👍🥃🥃🥃
Thanks a lot 😊
If done by Pakistan CZcamsr, it’s staged. Change your perception of the world
J'ai rien compris ce qu'il fait ce monsieur
The Best Rust Remover Is Only Sandblasting,Don't Ever Try Other Things
Rust can be removed by sandblasting, but rust can also be removed by other methods. I will try to get a sandblasting machine very soon.☺️
Be supportive
"He visto cosas peores"
Mi ex cuando habla de mí
Try to buy more equipments and make video more professionally. Also try to restore professionally as fabricated. Everything will be good bro, good luck
☺️
Why you guys ( restorers) use mud to make the videos more extreme kinda annoying
Pensé lo mismo
Hydraulic acid? 🤣🤣🤣🤣🤣🤣🤣🤣
Mistake during video editing.😅 The real name is Hydrochloric Acid.
@@AyazRestoration I know, it was just funny.
Poor restoration
Пазузу скример зеленая комната пазузу скример
Я не понимаю, что ты хочешь сказать
Tired about always the same staged restoration.
Were you there to see if this project was "staged"????
Don't you dare to think that all CZcams viewers are ignorant and naives.
Of course is staged. As always!@@dawnlord4893
@@dawnlord4893❤
I saw the expose video about how this “rust” is created. Shameless.
Yes. I saw it as well.@@energythief
Отстой
Вот зачем вы сначало нормальные вещи мажете грязью, а потом якобы их реставрируете?!
No front und ich weiß nicht, wie lange hier schon Restaurationserfahrung oder Ausrüstung vorliegt, aber es gibt schon bessere Restaurationsvideos.
1.) Metalle bitte ordentlich zurückbiegen, ggf. noch härten.
2.) Nicht aufeinmal anfangen, Schritte zu zu sehr zu skippen.
3.) Wenn gespachtel wird, dann bitte etwas ordentlicher (ggf. nach dem Schleifen erneut letzte Unebenheiten, Risse, Lücken etc. nachspachteln) und vor allem vollumfänglicher spachteln. Die Unterseiten/Außenseiten mögen ja relativ gut sein, aber die Innenseiten sehen leider noch sehr unsauber aus.
4.) Auch wenn neu angesprayt, so sieht man durch das unsaubere Spachteln leider zu viele unsaubere Arbeiten in Bezug auf 3.).
5.) Besser nach den ersten sprayen, nochmal fein schleifen und erneut einsprayen. Wenn möglich wäre Pulverbeschichtung hier noch schöner gewesen.
6.) Bei größeren Metallteilen oder Metallteilen mit vielen Winkeln oder bei dem Stein wäre Sandstrahlen noch fein gewesen. Man sieht einfach sowohl am Stein als auch am Gitter noch zu viele Gebrauchtspuren. Den Stein hätte man auch noch mit Ölen behandeln können, um ihn farblich einheitlicher zu machen.
7.) Metalle kann man ruhig auch noch auf Hochglanz polieren.
Gut fand ich, dass man Kleinteile wie Schrauben mit der Dreh- und Schleiftechnik wieder richtig wiederhergestellt hat.
Vielen Dank für Ihr Feedback. Ich werde versuchen, es im nächsten Video besser zu machen. Vielen Dank, dass Sie sich das Video angesehen haben.😊
*Without a doubt, the worst restoration I've ever seen and he uses GLOVES for it???*
I have no idea or intention to find out what the patent date was for this old electric stove. Especially with all of that caked-on rust and dirt distorted it. 🫠