The Cheap Woodworking Tool I Can't Live Without
Vložit
- čas přidán 23. 06. 2023
- One of the tools I reach for the most in my woodworking shop happens to also be the cheapest. A simple scrap of MDF with a sandpaper face can get you out of a jamb in a lot of situations.
LOOKING FOR SANDPAPER SHEETS? lddy.no/1gisj
LOOKING FOR SPRAY ADHESIVE? amzn.to/3JriExi
GET YOUR OWN DEWALT MITER SAW DUST COLLECTION BOOT HERE:
inspirewoodcraft.com/products...
DW716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
DWS716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
OR VISIT US ON ETSY
www.etsy.com/shop/InspireWood...
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON THE BEST CIRCLE CUTTING JIGS HERE!
jaspertools.com/discount/INSPIRE
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s CZcams channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful. - Jak na to + styl
In a world where woodworking creators put weird music, or video edit in Hollywood movie scenes and other non sense or tell you about their lives and what not or generally take 10x too many words to say anything
This channel is so very welcomed!
Two thumbs up
You don't appreciate crappy music that has absolutely nothing to do with the subject at hand.. Me either..
Easy. Simple. Smart. 3 words that define every video you put on here.
Could not have said it better.
Me either
Agreed, you nailed it
Agreed
You can do the same thing with some silicon caulk. Just butter on as level as you can, use a slotted credit card works too. Let it dry completely and it’ll stay sticky without leaving any residue and won’t hurt your sharp tools should your tool runs into it.
I’m disappointed I’m only now finding your channel. Two videos in and I’m happily subscribed. Can’t wait to see what else you have to bring to the woodworking community!
My experience e is that rubber (I use backside of mouse pads) is far superior to sandpaper for any push block application like this. Better grip and lasts much longer. Also they are thicker and not dependent on a perfectly flat surface as sandpaper is...and they don't scratch laminate.
Squishier and less accurate as a result, though.
@@jefftothealbright have you tried it? I've used both adhesive attached sandpaper and mouse pad stapled to a push block and I see zero advantages with sandpaper between these two. The pad is only 2mm thick and quite close staples means it doesn't move at all.
Also works great as a ... sanding block. :)
I actually make smaller MDF blocks and then spray mount different grits to them. Need to sand a corner edge and keep it perfectly 90º? Use the block on edge right on the table surface and you're good to go. Great tips!
When resawing for veneer on the bandsaw, glue the stock on to a piece of MDF that is a bit longer than the stock. Now you have a safe and flat backer board to place against the fence, and next to run through the planer before the next pass through the saw.
I made a similar push block with an offcut of plywood. Put some 80-grit sandpaper on one edge, which is useful for keeping my hands above the table saw while providing some "stick" to help guide the wood through.
Before I could afford diamond sharpening blocks I bought rolls of progressively higher grit adhesive backed sandpaper, which, you guessed it, eliminates using the 3m spray(which I can’t live without)! Great tip!
Another brilliant tip! You are one of the best channels out there for woodworkers. Keep 'em coming!
You make some of the most informative videos on CZcams. I hope to see more of your content soon.
The cheap woodworking tool I can use with every expensive woodworking tool.
Such a tool deserves a name! ... I suggest "The multi-purpose abrasive MDF sanding block Pro" or for short. Dave. ... Also, would it helper to have the abrasive on both sides? as the part your fingers are pressing is pretty smooth and likely to slip?
The Microjig Grr-ripper guys will HATE You for this video! :P
Jodee - Can’t thank you enough for all these tips. There are so many you have presented that I’ve added to my shop routine! So very much appreciated. I look forward to every new video you present.
Simple, straightforward and useful... Dig it!!! Thank you!
I first made these some time back for use as sanding blocks, and they worked fine. Now I see I have actually got multi-use tools! 😃
Another similar use tool I made to stop my sharpening stone from sliding is a piece of MDF with a thin layer of silicone sealant spread onto it. This works great, and I have used the technique on other items that I want to have some 'grip'... such as sawbench 'pushers'. The silicone eventually loses its grip when dust coats the surface, but a wipe with a damp cloth rejuvenates it somewhat.
Thanks for your video. 👍
A channel with a well deserved name: Inspire Woodcraft
This jig is the woodworking equivalent to that magical 5-in-1 painter’s tool.
------------
Remember kids to properly clear out the nozzle of that expensive but handy spray adhesive so you can get every bit out.
Hold upside down and spray until no adhesive comes out, just the propellant. Should be 2-6 seconds. Sane for any spray paint.
I used a case daily for adhering insulation to things.
Paint thinner/Varsol gets it off.
Your videos are probably some of the most useful woodworking videos on CZcams.
Thank you for one of the best, simplest ideas for a novice woodworker like myself.
Such a simple jig. So useful. I tip my hat to you.
I have found the simplest things are often the ones we use the most. Thanks for the video.
I love simple little finds like this!
Best tip I've seen in a long time. Fantastic! Thank you for the great video!
This is one of the most useful yourube accounts for woodworking ive found with zero filler and no dumb ideas thatll put my fingers in jeopardy
What a cracking idea. I have made a few of these over the years for the obvious use of sanding blocks. It never occurred to me to use them as push blocks. Particularly like the idea of referencing against the fence on my table saw. Thanks for sharing.
Soo simple but sooooo genius.
Thanks Jodie.
Absolutely brilliant idea.
Just wanted to say that I appreciate your to-the-point videos. Not a bunch of fluff, nonsense or goofing around. And not Shorts. Man, I hate those! Even your thumbnails are just the right blend of information and lack thereof; I never wonder if it's going to be clickbait with your stuff
Great tip! One of the best I've ever seen in a CZcams video.
I use something similar with a different grit on each face. good for sanding and many uses on table saw, as you demonstrated so well. I like cheap solutions.
Great! I especially like the use at the miter saw and the router. Thanks!
Holy crap! What a simple but great idea.
Brilliant. Simple and so many uses.
Fantastic idea! Gotta make me one of those for the shop! Thanks! 👍👍
Now, that was very very good! I've made many push blocks and I've found when you take the time to make safety sticks, pushblocks it's well worth your time and fingers.!
Thanks for sharing.
You give the best tips. Thx.
When running against the fence to square up the edge, the block needs to remain in contact with the fence through the entire cut; otherwise, the cut will taper out as the material shifts into the fence at the end of the cut.
What a great idea. Simple.
this is a great idea
Genius! The perfect tool I didn’t know about!
Shop safety tool and tips! Thanks 😊
Great tip thanks for sharing
Love this tip!!!
Thank you 😊
What a fantastic idea. I’ll be making one, or maybe a few, very soon. Thanks for posting this tip. 👍
You always have the best tips and tricks. gonna whip up a couple of these as soon as I come across the spray adhesive i buried somewhere during my move haha
Love your video, so practical and useful
Excellent Bro.
Thanks!
Brilliant, no longer a need for a fancy jig to square up your wood.
another elegant idea! thanks!
Thanks a bunch for all the tips, dude! 😊
Stay safe there with your family! 🖖😊
Thanks Dude
Great tip.
I'm convinced!
Imagine my surprise when I realized that I wasn’t subscribed to your consistently outstanding videos! That’s been resolved now. Great video, brilliant idea! Thanks!
Great idea!
You are a genius!
thanks for another Inspired short 👌
Damn great solution. Thanks for sharing!
Hey, that's a nice tip.
I also use mine for sanding😊
Genius!
Very cool tip - love your channel.
I like it! Making one now
Killer idea!
Must make!
Awesome!
Good video
thanks
Sweet!
I guess Skateboard Grip tape would work too..since its pre-adhesive.. and it comes in different colors.. or CLEAR griptape as well.
Video mark 01:44 That is a detailed tattoo of Pres. Abraham Lincoln.
Great tip. Cheap tool, Yes. Cannot live without, Well maybe. 🙂🙂
Seems really useful for if you can't get your track in line with your band saw blade.... Like a friend of mine has 🙄
Great tip! (just dropping a comment). Hope all is well on the left coast.
You’re kind of a genius.
Is it really much safer? Applying pressure with your hands on this block vs on the workpiece, it only adds 3/4" extra space between your hands and the bit.
I like this idea very much, thank you. I did not see how you attached the edge, do you bend it around from the face and then cut it ?
clever use of MDF scrap (aka trash!)
StupidLy simple. Great stuff. I’ll try a few myself. Thank you!
When being used as a pushstick, you don't worry it might dull your blade ? 🤔
😎👍☘️🍺
Cool
Great one!
Where’s the affiliate link? This is CZcams. Come on! 😂
Great tip thanks.
What grit paper have you found to be the best for these blocks?
Ken Myerscough - Southport UK.
Probably worth investing in a box of sandpaper cut off rolls from Klingsphor.. I have more sandpaper from them than I'll ever use in my lifetime..
Purple sandpaper?
What is the “square” product you’re using? Is it a type of speed square?
I would be so much more productive in my garage if you were standing in the corner unleashing a barrage of tips and methods to follow ! 😁
And here I am buying Grr-rippers and a 10 million dollar stick
Jodi another great tip and video. One question about your miter station (@about 2 min marker you showed cutting a piece). Is the miter platform height offset lower than the table or is it just an illusion? I have normally seen miter stations built with the height aligned to the saw. But if you have offset it to be higher there must be some reason. Hence asking. TIA & always looking for your "Inspirational" videos.
@ashokmoghe8035 Hopefully I read your question right, but the top of the miter saw table is set to match the height of the counter. Might be optical illusion afterall!
👏👏👏
it's slices it dices it makes Julianne fries.. I was running the table saw the other day and kept thinking I was going to slice my finger
1:30 will running sandpaper through the blade affect its sharpness?
I wouldn't think so. Id imagine dense lumber or even mdf itself, with all that glue, is probably worse on your blade... but I guess you could only know for sure with a quantifiable test.
💪🏻👊🏻👍🏻✌🏻❤️🇩🇪
👍🏼🍻😎
hey @inspire woodcraft, are you an infleuncer or a content creator? whats your business called? as you do youtube vieos but also create stuff and get cash for it?