Rode Wireless Go II best settings and how to use on a mirrorless camera

In this video, I explained all the settings available on the Rode wireless go II and how to use it on a
mirrorless camera.
00:00 intro
00:47 button functions
01:52 button functions
06:30 Rode Central-settings the transmitter
09:16 Rode Central-settings the receiver
10:37 Use it on a mirrorless camera
Amazon links below, the links are affiliate links, they will not cost extra but will help the channel, many thanks.
Rode Wireless GO II: amzn.to/3Qdg2Wa
Rode Wireless GO II Single ( one receiver+one transmitter):amzn.to/3If0HCo

[@omeokelevra4940]

Thank you, very helpful. I made a mistake of going out and do interviews and realized later on that the sound was off the "ALWAYS ON" option is really a must

[@kirisgarage8590]

Great stuff and you did a very informative video 👍

[@mcneilbelle]

Very useful thanks

[@JanandAnn]

THANK YOU! this was really helpful and im glad you kept it super simple!

[@florinG]

Thanks for your feedback glad u found it useful 👍

[@cldumitrescu]

Merci Florin. Chiar utile sfaturile tale.

[@jahbeanz1943]

VERY GOOD VIDEO THANXX!!!

[@MyThrivingMind]

Easily understood!❤

[@nickinthecutt]

lit! thx u i didnt even know about split mode

[@SuperGizzzmo]

Hi there hope you are okay, I just want to say when I open the box and I watched a few videos this scared the heck out of me as I am not that techie.
I panicked and was minutes from sending them back to Amazon.
Until I watched this video I can’t believe how are you calm someone down with a very exceptional video.
Keep up the good work

[@florinG]

Thanks for the feedback, I appreciate it.

[@chaplinesque111]

Same here.

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information

[@florinG]

You’re welcome, thanks for the feedback.

[@LucyLeheilleix]

Thanks for a very informative video!

[@florinG]

I'm glad it helped 😊

[@fernandocrespophotography8680]

Excellent video. This was very usefull. Thank you!!!

[@florinG]

Great, thanks for your feedback.

[@bravogenetics]

Thank you for making this waaaay more simple then it really is lol

[@billrhea]

This is the best video on these

[@pbvision9688]

very usefull. thanks

[@florinG]

You are welcome

[@imzaazmi]

Thank you for this video 👍👍

[@florinG]

You’re welcome ✌️

[@DannaGesellchen]

Please turn up your volume.

[@florinG]

Hi, thanks for your feedback, I’ll consider that ✌️

[@alirezacharghand1187]

thats so grate

[@mg-pictures]

When checking sound always use headphones for monitoring. Don't trust db bars only as there could be other sound issue.

[@Kiswa]

Thank you very much. Why when I use only one transmitter the sound is not clear when I wear earphone only one ear seems to work ?

[@Paulydeetv]

THANK YOU / GRACIAS HERMANO🇵🇷🫶🏽

[@florinG]

You’re welcome!

[@eduard.amihai7545]

hello if i register in camera with just one transmiter and you use split mode i can't transform the audio track in stereo afterwards(it just mute the track if i try)...but if you use the track that you have as a backup you can do it..have you experienced these problems?how you fix this?

[@Jackgunned]

Nice video. Is there a recommended standard gain setting that I can expect good quality audio?

[@sjeditor]

The recommended gain setting is whatever will get your voice to the -12 to -6 level. Trust your camera meters! On his a7iii he set his rode to -12db and +1 on his camera. On my a7iv it is different setting which is why you gotta look at your camera meter. They don’t lie.

[@jimmymcgill8112]

@@sjeditor What setting do you use bro for a7iv?

[@unseen_nepal]

why 2nd channel has low noise level compard with 1st channel. Do you have any solution without factory reseting.? However i have fixed it by factory resetting the receiver.

[@kiminicole4573]

I need help for how to setup for my canon rebel sl3 I'm trippin

[@glenowen988]

Great video, iv bought the rode but I haven't got a camera, can I use these wirless rode mics with my Android phone ?

[@florinG]

Yes, it works like a dream, here’s a video on how to do it hope it helps RODE WIRELESS GO II Connect to a mobile phone and how to use the Rode Interview Go
czcams.com/video/AOngvqYcndE/video.html

[@bobmusikk]

I've seen a couple of videos saying that the best level in camera was 3.. well

[@Isabelonvideo]

Hi. I am looking for an excellent wireless setup for vlogging.. is this it ?

[@florinG]

Yes this is a very good wireless setup for vlogging, dunno how good it is in terms of interference because I have not been to many place with it but because it has audio backup it should be too big of an issue plus rode claims it's immune to RF interference, so yeah. For vlogging I personally would use it with a lav, but works great even without, thanks.

[@Isabelonvideo]

@@florinG Thank you for your help!

[@moesafi8301]

yo i need help i got the same exact set up however the mic displays on the transmitter but not on the camera, PLEASSE HELP

[@florinG]

Hi, go to camera video settings, and make sure audio level display is on. Some cameras only allow accessing those setting while in video mode, thanks.

[@zalle1]

Can you use one transmitter on its own? Without receiver?

[@florinG]

Hi, yes. If you connect the transmitter to the Rode central app and enable always record function, then your transmitter will not only send signal to the receiver but also record on board. Accessing the audio file on the transmitter can be done again via the app, thanks👍

[@1ananas68]

📸📷🤳

[@DeezKnightz]

Why is channel 1 on your camera way louder than channel 2 and how do you fix it to make them even because during playback the left side speaker will be way louder than the right side.

[@florinG]

Hi, there are ways to access a channel and edited it individually within a track. From your comment I take that you’re trying to record on the camera but one channel is louder than the other is that right ?

[@DeezKnightz]

@@florinG yes exactly

[@florinG]

Hi, sorry for the late reply. You’re experiencing this issue because you’re in merged mode and you have safety channel turned on, thanks.