Polaris Edge Drive Shaft Bearings. Classic Polaris Trailing Arm Indy Snowmobile Repair.
Vložit
- čas přidán 10. 02. 2024
- The speedo quit working on my edge, so some investigation was in order and what we found was bad! But we caught it in time to prevent damage to the tunnel, so all was good.
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage - Auta a dopravní prostředky
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop
Nice triple!! Glade to hear clean the carbs!! Lol we have a little snow went out for a ride next snow was gone!! Not a great snow year here either in Ontario
It's bad.
Very cool edge
Thanks
That stand is so nice to work off.
I went to the newcomb ny snowmobile ice races yesterday and saw some awesome racing sleds
Hey! Something different! You’re right Nutter, the Edge chassis was such an awesome trail sled no matter what motor or track you had in it 👍
I still have my dad’s 03 700 SKS and it rides just as well as the new sleds in my opinion, just in a different way.
Nice to see Dennis do the outro too!👍
Cheers guys 🍻🍻🍻
Thanks 👍
love the trailer park boys reference 😂worst case ontario
Seven cracked on camera. :) Think how many you haven't broken this season!
Thanks for the videos Nutter
Glad you like them!
I debated it i should be that guy or not. I decided yes im gonna lol thats actually not a pro x chassis. Its an edge chassis. Pro x and edge look the same, they are very similar, but they are totally different. Pro x would have a shock tower brace from one another. The bulkhead would be a solid brace in front of the recoil housing (makes changine the recoil a pain). Front suspension on a pro is is a shorter beefier trailing arm, larger diameter radius rods, and taller shock towers for longer shocks. Rear suspension on a pro x is totally different and stronger, you cant even use the same mounting bolts from and edge. At least 03 and 04 they were different.
Either way you got an awesome sled. Looks like an 04 edge chassis and tunnel. I think 04 was the only year with a black painted edge tunnel and that grey fish bone along the tunnel and running boards. 2004 was the first year Perc reverse was standard on all sleds. 03 it was an option. The handbars on the sled is totally edge chassis. Pro x would have exposed handlebars, it wouldnt have the same master cylider and control block on left side. Pro x master cylinder was a willwood master cylinder. The high and low beam switch is actually a wedge chassis switch. And the perc button would be its own stand alone button.
I had more fun on an edge than any other sled....fast and handle good
Agreed
I rode a pro x last year it's a nice riding sled I got three out of the 4 colts running the SS 250 I'm going to put new pistons and rings on it this summer but I got it to fire
Sounds great!
make a T shirt with all u guys standing next to each other like at the beginning of the videos !!!! Also make a shirt of just Tommy taking a drink out of his beer bwahahaha. clean da carbs
Maybe one day!
Are you sure thats a pro x? It looks like a mix or parts but i am leaning toward a 03 XC chassis originally
Not sure.
Those jackets are alittle high class. i hope the shop hasnt raised rates.
Question. Can you put the 500 jugs and pistons in a 400 case?
Fuji Indy 400 and 500? Yes.
Did I hear worst case Ontario? 😂
TPB
Are you still looking for a rxl?
Yes, go ahead and e-mail me price, pics and location. Thanks.
did the speedo work?
Yes, that fixed it.
I was wondering the same thing. I have a 03 polaris prox bulkhead that driveshaft hollered out some.