How to remove a shower handle from a Price Pfister Shower Handle with NO SET SCREW --- allowing for access to the temperature control for the shower to be increased or decreased.
Thanks a ton. I thought I broke something inside the handle where it was just a matter of tightening a screw. I was unable to figure out how to get the handle out for a replacement. Your video helped me open the handle and identify the root cause of the problem.
Excellent info! thank you! one quick note: There is a Philips bit end provided for the adjustment. Last but not least...Turn the channel locks around, you are using them the wrong way. Dont worry we all do it!
Thanks for posting this. I have a similar handle and I had no clue how to take it off. After watching this video, I removed it in seconds and was then able to fix the problem!
Turning that piece sticking out turns the water on. You have to take that screw out and that piece out then pop the little black piece at the back off and rotate it counter clockwise for hotter. It has teeth so has to be pulled out and turned and put back in.
Thank you good sir! For years just kept turning the dang handle to adjust and never knew to take it off to reset it. Now the whole thing doesn't turn when I try to turn on to hot or to turn off.😂
Thank you for this ...I ended up calling the company for a replacement part...now they make that stem brass instead of a plastic insert Covered by the warranty
Also to change the temps higher, you need to take off the extender and screw, pop the little round tab that says to move to lower and go the opposite way, move the dial to the left so the handle goes further up. Hot water from hell and put everything back together. The handle won't align straight now that the dial has moved. Wife wanted hotter water.
Mine is a bit different also with no set screw. When I turn it to the left I hear a pop, like plastic popping, now I really have no clue. round handle almost looks like two pieces I just dont want to break it
Thanks a ton. I thought I broke something inside the handle where it was just a matter of tightening a screw. I was unable to figure out how to get the handle out for a replacement. Your video helped me open the handle and identify the root cause of the problem.
Exactly what I was looking for including temp
Excellent info! thank you! one quick note: There is a Philips bit end provided for the adjustment. Last but not least...Turn the channel locks around, you are using them the wrong way. Dont worry we all do it!
oh my god FINALLY. i’ve been looking for this fix forever. thank you so much
God bless you for taking the time to share this with us. Saved me a ton of time.
Thanks for posting this. I have a similar handle and I had no clue how to take it off. After watching this video, I removed it in seconds and was then able to fix the problem!
Turning that piece sticking out turns the water on. You have to take that screw out and that piece out then pop the little black piece at the back off and rotate it counter clockwise for hotter. It has teeth so has to be pulled out and turned and put back in.
Thank you good sir! For years just kept turning the dang handle to adjust and never knew to take it off to reset it. Now the whole thing doesn't turn when I try to turn on to hot or to turn off.😂
Thank you!! I was struggling 😅
Thank you
thank you so much I completely forgot how this thing went in it’s been a few years. ThankYou!
You are a godsend. Thank you!
THANKS! REALLY HELPED 👍🏽👍🏽
dude i have the same setup and this helped huge. couldn't find the screw lol also trying to increase hot water temp.
Thanks Paul! Gotta work together man, right?!?
I hope this works for Glacier bay handle. Thanks for the video
I fixed my hot 💧 thank you!!!
Thank you for this ...I ended up calling the company for a replacement part...now they make that stem brass instead of a plastic insert
Covered by the warranty
Do you know the part number or a link?
Yeah finally thank you so much
Also to change the temps higher, you need to take off the extender and screw, pop the little round tab that says to move to lower and go the opposite way, move the dial to the left so the handle goes further up. Hot water from hell and put everything back together. The handle won't align straight now that the dial has moved. Wife wanted hotter water.
I also have a video to help with the temp adjust... czcams.com/video/TY9RWvxdscc/video.htmlsi=7flvrbxFVZ159Ymw
Thanks
Thx!
Mine is a bit different also with no set screw. When I turn it to the left I hear a pop, like plastic popping, now I really have no clue. round handle almost looks like two pieces I just dont want to break it
Actually there is a plastic ring that needs to be moved after unscrewing traded plastick nyple.
Great video - I want warmer water- in this video you didn’t indicate if you were turning the pliers for warmer or cooler?
I have a video with temp adjustment too... czcams.com/video/TY9RWvxdscc/video.htmlsi=7flvrbxFVZ159Ymw
I’m having trouble getting it to unscrew… any suggestions? Tried using an adjustable wrench with rag to protect metal, but it just slips😫🫠
Does anyone know how we can lube the action? Mine has so much friction.
A lot of companies are doing away with the set screw now because hard water would corrode it so bad there’s no way to get the set screw out haha
What model is that?
Do you know the part number for this type.
and i took a chance and didnt turn the water off,.. worked okay not a drip.
Exact comment I was looking for. ..thNk you!!
I'm about to take the chance tonight lol
Sometimes they do sometimes they don’t better to be safe if it bust you will be thankful
What's the part number for this shower handle
Sorry I don't know the part number.
@@clayj.8411 hey clay, do you know where you purchased the cartridge? Thanks
@@inahoh7776 no purchases made... just used existing parts. maybe try local specialty plumbing store??
Thank you